|
|
Apartment building in Olomouc
Zbořil, Dominik ; Různar, Daniel (referee) ; Bantová, Sylva (advisor)
The subject of the bachelor thesis is the design and elaboration of the project documentation for construction for the apartment building. The proposed apartment building is located in Slavonín, a city district in Olomouc. The apartment building is designed as a detached building with three above-ground and one underground floor. Part of the land where the apartment building is designed is flat. There are a total of 8 residential units in the apartment building, while the apartments on the 1st floor have a large terrace with a separate garden, the apartments on the 2nd floor have a spacious balcony. On the 3rd floor there are only two residential units, one apartment has a large terrace, the other has a balcony. Each apartment has its own cellar cubicle in the basement. There are also a technical and cleaning room, a bycicle and pram storage room and a meeting room. An elevator connecting all floors is designed in the building. The apartment building is based on concrete foundation strips, the vertical load-bearing structures in the basement are formed by permanent formwork. The load-bearing structures above the terrain are realized by brick blocks, which are insulated with the external thermal insulation composite system ETICS. Horizontal load-bearing structures are designed as reinforced concrete slabs. The whole building is covered with a warm flat roof with extensive vegetation. There are also other warm flat roofs in the building, one covering the entrance of the apartment building and the other forming a terrace. The whole building is designed as a building with almost zero energy consumption.
|
|
|
Apartment house
Tománková, Marie ; Beranová, Iveta (referee) ; Matějka, Libor (advisor)
The subject of the bachelor thesis is a design of a new detached apartment building in Nový Jičín. It is presented as a design documentation for a building construction. The building has a cellar and four above-ground floors and is covered by a single-shell flat roof. It is founded on a strip foundation and pads. There are 13 apartments in the above-ground floors with a size ranging from a studio apartment with a kitchen to 4-room flat with a balcony or a terrace. In the basement, there are technical facilities, garages and storage space for residents of the apartments. The wall cross-section structural system is made from HELUZ masonry units except for the basement external wall which is made of reinforced concrete. The ceiling construction is made of cast-in-place reinforced concrete. The whole building is insulated with contact thermal insulation and provided with a ventilated façade.
|
|
|
Residential housing Troubsko
Číž, Martin ; Galata, Jindřich (referee) ; Štěpánek, Ladislav (advisor)
The aim of the bachelor thesis is a project documentation for the construction of an apartment building. Designed appartment building is new building consisting of two independents sections with separate entrances and staircases, both sections are identical only mirror imaged. Floor plan shape of each section is rectangle. Objects have two above-ground floor and one basement. There is six dwelling units in each section, four of them are 3+KK in the first floor and basement and two 2+KK in the last floor. Dwelling units located in basement have access to garden and units in above-ground floor have balcony or loggia. Last floor is recessing and thanks to that there is a place for spacious terrace. In the basement there are cellars for each appartment and utility room. Parking is provided outside the building on the paved land. Foundation construction of building is foundation strips supported by gravelly piles, masonry cunstruction is used for all the floors and ceilling are cast-in-place reinforced concrete thermal insulation of the facade is made with ETICS system. Roof is warm flat roof with PVC foil. Facade is insulated with polystyrene and in the area of fire belts there is used mineral insulation and foam glass.
|
|
|
Apartment Building in Litomyšli
Navrátil, Michal ; Pospíšil, Jaroslav (referee) ; Kolář, Radim (advisor)
This bachelor thesis elaborates the project documetation for the construstion of a new apartment building in Litomyšl. The city is located in Pardubice region.The apartment building has three above-ground floors. The house is non-cellular. The object contains six apartment units. The house is located in a sloping terrain. The building is based on a concrete monolithic strip foundation and footings. The perimeter masonry is out of the system VELOX, which consists of štěpkocement board. The boards form a lost formwork fulfilled concrete core, in which the thermal insulation of the stabilized expanded polystyrene with addition graphite is incorporated. The celling construction is constituted of monolithic reinforced concrete slabs, which are reinforced by a cross or one-way. The walls in the contact with the soil are made from the lost formwork of štěpkocement boards fulfilled with a concrete core with thermal insulation extruded polystyrene in the backsplash zone. Above this level there will be an insulation of non-flamble mineral wool. The roof is warmflat and its stabilizing layer is made of fluvial aggregate. On the roof a roof garden with a layer of plastic tercce planks is placed.
|
|
|
Multifunctional buiding Dělnická
Horňáková, Veronika ; Velecký, Pavel (referee) ; Utíkalová, Ivana (advisor)
The subject of diploma thesis is processing of the desing documentation for new multifunctional building in the street Dělnická, cadastre unit Komín, Brno - Komin. The building is a 3 floors and one underground floor and is designed as a last building in the street on the nearly flat land. In the building is located non-residential space, dwelling units and studios. Non-residential space comprise seven parking spaces in a public underground garage, two stores barrier-free solution with the facilities and two studios 1 + 1. The residential part has two dwelling units 1 + kk, two dwelling units 2 +1 and two dwelling units 4 + kk. The building is based on a waterproof concrete structure "white tub". The vertical structure is built of clay blocks Porotherm, horizontal structures are cast-in-place reinforced concrete. The exterior building envelope is completed with thermal insulation. An internal staircase is cast-in-place reinforced concrete. The entrance to the garage for cars is possible by Autolift. The building is roofed with warm flat roof. The drawings are processed in AutoCAD software visualization are processed in Sketch Up
|
|
|
Detached house with an establishment
Papst, Ondřej ; Fixelová, Veronika (referee) ; Kacálek, Petr (advisor)
The aim of the bachelor‘s thesis is to work out the design documentation for realization of the construction of the detached house with an establishment in Havlíčkův Brod. The building is detached, it is functionally divided into two parts – detached house, with a partial basement and two above-ground floor, for up to four-members family and into a single-storey establishment used as a butcher’s with up to three-members staff. The structural system of the building is masonry, the basement masonry is consisted of concrete blocks of permament formwork, the others above-ground floor are consisted of clay blocks. The floor structure is designed of cast-in-place reinforced one-way and two way slabs, the roofing of the building is made of warm flat roof with PVC covering. The external walls are supplied with contact thermal insulation system ETICS. The building is set in a lightly sloping terrain.
|
|
|
Senior center
Tománková, Marie ; Kozubíková, Ivana (referee) ; Matějka, Libor (advisor)
The subject of my diploma thesis is the design of a new building "retirement home", a home with a special regime, in the form of project documentation for the construction. The building is partly basement with four above-ground floors and covered by a single-layer flat roof. On the first floor there are common, operational spaces and spaces for commercial use. The other above-ground floors are identical and serve as an accommodation. There is mostly technical background in the basement. The construction system is a wall bi-directional of brick masonry elements, with the exception of basement masonry, which is made of reinforced concrete. The object is based on foundation pads and strips. Ceiling structures are monolithic reinforced concrete. The whole building is insulated by contact insulation and has a ventilated facade.
|
|
|
Mixed-use building in Brno
Koždoň, Jakub ; Procházka, Martin (referee) ; Sobotka, Jindřich (advisor)
The subject of this diploma thesis is a newly built mixed-use building in Brno. It is a four-storey building without cellar. The building is located on a corner plot in an urban part of Brno - Židenice. In the 1st floor there are three business units. On the other floors are a total of 11 apartments. One apartment is located in the courtyard. It is designed for people with limited mobility. The vertical structures are of the ceramic blocks Porotherm. Ceiling structures and staircases are cast-in-place reinforced concrete. The building is insulated with contact insulation system ETICS. The roof is warm flat. The project was processed by computer software AutoCAD 15.
|
|
|
Apartment building
Fric, Marek ; Navrátil, Michal (referee) ; Kacálek, Petr (advisor)
This bachelor thesis processes documentation in the stage for the implementation of the construction for a new apartment building. The designed object is located near Prague, in the village of Dolní Lomnice u Kunic. The project adresses modernization and construction of the village center, which is planed in several stages. The building contains of five apartments and one underground floor in which storage, technological and common rooms are located. There are also cellars used for storage for each housing unit. The apartments are designed in very variable layouts ranging from 1+kk to 5+kk. In the first floor are located apartments with categories 1+kk, 2+kk and 3+kk. In the second floor are located apartmetnts with categories 5+kk (duplex apartment) and 1+kk. Each apartment is provided with a large terrace or balcony. Apartments in the first floor oriented to the northwest (east) also have a front garden. Apartment building is based on flat foundations of reinforced concrete monolithic slabs. The core of the object (stairwell and lift shaft) are also made of monolithic reinforced concrete walls. The load-bearing structures are designed as masonry from classic and sound-insulating brick blocks. Non-load-bearing are made either of brick blocks of thickness 140 mm or 80 mm, or as a lightweight SDK constructions. Object is insulated according to need by ventilated facade cladding and a system of green walls. The ceilling is made of reinforced concrete monolithic equipped with SDK soffit either directly anchored or suspended. The flat roof is vegetated, and partly made as a terrace. The windows and the outer door are made of aluminum and glazed with insulating triple glazing.
|
|
|
Construction Project for Implementation of Houses in Slavkov - Pod Zlatou horou
Kurková, Dita ; Venkrbec, Václav (referee) ; Nečasová, Barbora (advisor)
The subject of the diploma thesis is the solution of chosen parts of the construction technology project of the 1st phase of the construction „Komplex RD Slavkov, Pod Zlatou horou“. These are 4 semi-detached houses, overall 8 family houses. The work deals with technological regulations for the superstructure including roof, study of the realization of the construction technology project, design of the main construction machines and mechanisms and control and test plan. For the whole construction is elaborated time and financial plan in two variants, namely the gradual and current method of construction, and a detailed schedule for one semi-detached house. The technical report of the building site equipment is completed with the drawings, itemized budget of the building part of the house, noise study and specialization focused on the photovoltaic system, with an alternative solution to use solar collectors. The thesis also includes a case study of construction methods focused on the gradual and current method of construction.
|
guest ::
