|
|
Low floor apartment complex
Doležel, Ivo ; Párová,, Jitka (referee) ; Rusinová, Marie (advisor)
My thesis deals with a project documentation processing of a new building “ Low Floor Apartment Complex – Horoměřice”. All requirements strictly follow effective legal regulations. The complex is comprised of three objects arranged as the U-shape. The two-floor object A is a combination of masonry from reinforced concrete and a wooden structure. The object B is a single-storey wooden structure and the object C is a two-floor wooden structure. All these objects are covered by a two-coating counter roof. My thesis is a construction technical arrangement, which contains a fire safety report, a heat treatment, a layout plan, a proposal and a calculation of a strip foundation as well.
|
|
|
The lease object Campus Bohunice - construction technology project
Platzerová, Veronika ; Dvořák, Miloslav (referee) ; Biely, Boris (advisor)
The subject of this diploma thesis is the construction and technological solution of the construction of the campus building Bohunice - object C. This building is a new building located on several unfinished parcels. The diploma thesis contains technical reports, technological regulations of the selected works, control and test plans for these works, design of the machine group, the transport relations in the narrower and wider surroundings of the construction, the budget budget, the timetable, the design and realization of the tower cranes.
|
|
| |
|
|
Laboratory device with analog computational unit AD538
Hruboš, Zdeněk ; Slezák, Josef (referee) ; Petržela, Jiří (advisor)
An analog multiplier are circuits, that are realized multiplication of two analog signals. They can be made by suitable connection (according to function) discreet parts. Nowadays there are integrated circuits in advance function, whose internal structure is made by complex of circuits with operating ampfliers and other circuits. These circuits have a very high accuracy of arithmetic operation which is mostly better than 1%. The analog multiplier are used in situation, when we need realize multiplication, division, exponentation, square root extraction and logarithmic calculation of analog signals. In the next are used in circuits for multiplication of frequency, shifting of frequency, amplitude modulation, detection phase angel of two signals with the same frequency, etc. The AD538 is a monolithic real-time computational circuit that provides precision analog multiplication, division and exponentiation. The combination of low input and output offset voltages and excellent linearity results in accurate computation over an unusually wide input dynamic range.
|
|
| |
|
|
Construction-technological stage of the lower construction of an apartment building in Miloslavov
Rumpel, Jonatán ; Vlčková, Jitka Laura (referee) ; Diaz, Yvetta (advisor)
The subject of this bachelor thesis is to elaborate on a construction – technological project of the substructure of an apartment building in Miloslavov, which is located in the newly established part of the village Miloslavov – Alžbetin dvor. The content of the work is the elaboration of an accompanying and summary technical report, broader transport relations, statement of acreage, technological regulations, time schedule, the design of machine set, control and tests plans and safety and health at work.
|
|
|
Bus terminal building - static analysis
Fišman, David ; Jurík,, Michal (referee) ; Zich, Miloš (advisor)
The master's thesis deals with the construction and design solution of the bus terminal project in Liberec. The building consists of three floors with different functions. In terms of structural shape, the entire length of the building consists of a cross-section of a two-storey, asymmetrical cantilever suspended on both sides. The main load-bearing structure of the roof contributes along its entire circumference to the load-bearing capacity of the lower ceiling by a system of ties. The design was defined by a feasibility study of the project, which established the concept of the appearance of the structure. The main target of the thesis was to design the solution of the load-bearing structure and then perform static analysis, dimensioning and assessment by the method of limit states according to the corresponding ČSN EN. The solution of the construction consists mainly of reinforced concrete elements which are suitably combined with steel parts. Elements of reinforced concrete are designed as monolitic or prefabricated. For the most loaded two-sided cantilever was designed reinforced concrete variant and prestressed variant. The thesis was made in its extent in a BIM compatible design.
|
|
|
Block of flats at Vinohrady street
Dvořák, Vít ; Šiška, Radek (referee) ; Strnad, Jiří (advisor)
The master´s thesis is focused on a design of monolithic reinforced concrete construction of an apartment building. The content of this work is design of two ceiling slabs, staircase, supporting columns, walls, girders and concrete pile construction of foundation. Thesis includes working-out of static calculation, elaboration drawing of shape, reinforcement of solved elements and evolvement of assembly drawings. The rest of the project parts are not analysed.
|
|
|
Selected parts of Construction-Technological Project - LOGISTICS CENTER HEMAT
Valouch, Ondřej ; Venkrbec, Václav (referee) ; Čech, David (advisor)
The subject of my thesis are selected parts of construction technology project – construction of the logistics center Hemat in Ostrava. This thesis solves technological regulations for foundations and installation of the main steel structure. It also includes a technical report, technical report site equipment, suitable choice of construction machinery, timetables, itemized budget, inspection and test plan, occupational safety, dealing with traffic routes, situation of site equipment.
|
|
|
Technological stage of the rough construction of the residential building in Bratislava
Krajčovič, Matúš ; Novotný, Michal (referee) ; Doubek, Rostislav (advisor)
The subject of my bachelor thesis is the processing of the structural work of tower structure. The construction is based on piles and foundation plate. The thesis presents the construction solutions from the perspective of construction technology. Part of the work is an accompanying and summary technical report, site drawing and site equipment, broader traffic route relations, timetable, itemized budget, work list with quantities, machine assembly, technological regulation for the monolithic construction – waterproof concrete construction, safety and protection at work, field research of cranes.
|
guest ::
