|
|
The restoration of Trabant 601 Historic Vehicle
Krček, Štěpán ; Janoušek, Michal (referee) ; Dundálek, Radim (advisor)
The aim of this thesis is to create a technical procedure for the renovation of the automobile Trabant 601 and to subsequently describe the use of this procedure in practice. The first part describes the history and development of the car manufacturer VEB Sachcenring Automobilwerke Zwickau. This is followed by the history of the automobile Trabant 601 with the description of manufactured variants. The contents of the subsequent chapters are the technical descriptions of the vehicle and of the procedure for its renovation. The whole process of renovation is substantiated by photographic documentation. The last part includes financial assessment of the whole project.
|
|
|
Renovation of historical tram
Rozsypal, Josef ; Černý, Jiří (referee) ; Škopán, Miroslav (advisor)
The aim of this bachelor thesis is to create a methodology of basic works for the renovation of the historic tram and subsequently apply this methodology to the renovation of the historic tram 4MT. The work begins with a general historical overview. Following is a section on pre-renovation and related tasks. The next chapter is about the renovation of vehicles in general. This issue is discussed in more detail in the next chapter, which also describes the process of renovation of individual parts. The last but one chapter deals with the finishing work that follows the renovation. The last part describes the approval process for the vehicle operation with passengers.
|
|
|
Pneumobile car-body design for robotic fabrication
Vevera, Tomáš ; Nevřela, Petr (referee) ; Škaroupka, David (advisor)
This thesis solves design of the pneumobile bodywork designated for robotic manufacturing using curved folding method. The thesis evaluates possibilities of this technology and issue of specific behaviour of CCF geometries. With intention to simplify and speedup the proces of designing, the suggestion of software tool for CCF geometry simulation is proposed. Obtained pieces of knowledge are being used in creating the prototype of designed solution using curved folding.
|
|
|
Škoda Octavia Super
Netopil, Jan ; Nedoma, Jiří (referee) ; Kaplan, Zdeněk (advisor)
My work contains a comprehensive aggregate of knowledge which is needed for a renovation of a car Skoda Octavia Super. It provides a description of the construction and an execution of a chassis, a transmission, an engine and accessories of the car for individual manufacturing sets, next is a description of a colour execution and a superficial modification. I put emphasis on the identification of all mechanisms and Skoda Octavias accessories (the eighth manufacturing set). The right execution approximates many photographs, a function of the transmission of a functional scheme. All mentioned pieces of knowledge are based on studying of a period literature, a catalogue of spare parts, a contemporary literature and verifying information in the Skoda Octavias museum and in veterans clubs. This work also pays attention to issues of the renovation of the car and its financial demands, options how to use additive technologies during the renovations of cars. In conclusion is evaluated a condition of renovated Octavia Super, year of production 1960, carried out a checking measuring of selected mechanisms and worked out a budget of the renovation. The work brings theoretical knowledge which is needed for returning of the car, Octavia Super, to the state as it was made.
|
|
|
Movement therapy in the residential substance abuse treatment
Adamíková, Žaneta ; Bitnar, Petr (advisor) ; Janečková, Alexandra (referee)
This thesis is a discussion of the possibilities of using movement therapy as a complementary method within the context of medium-term or long-term institutional treatment of addictions. It is divided into 3 parts. The objective of the first part is to describe the basic concepts and to disseminate the information regarding addiction consequences and its causes. It also includes epidemiological data, a deconstruction of the system of medical care, and the basic tools used in the substance abuse treatment. Complementary to this, special parts map the possibilities of the use of physical activity involving body-oriented methods. It's objective is to detail the effects of these methods on patients. The positive effects highlighted by my thesis are the reason why the movement interventions should be used as a part of the complex treatment. In the second part, common illnesses that lie among addicted people are further examined, mapping the treatment of these diseases through the use of physical therapy. The practical, third part involves the qualitative data and contains the case report of a patient who is dependent on several addictive substances and is currently undergoing the treatment in a psychiatric hospital. Her medical and drug history, individual therapy, including kinesiological analysis,...
|
|
| |
|
| |
|
|
Formula Frame Design with Bodywork Fastening Solution
Trněný, Pavel ; Dundálek, Radim (referee) ; Ramík, Pavel (advisor)
This masters thesis concernes with design of formula student frame. Part of masters thesis is to a overview of possible solutions. The main criterion in frame design is final torsional stiffness. Another part of frame design is too solution of suspension attachement to frame. In next part of masters thesis is solved bodywork design and it´s fastening to frame. Final part has few informations about frame manufacturing.
|
|
|
Adhezive bonding in the car industry
Bláha, Aleš ; Žák, Ladislav (referee) ; Kubíček, Jaroslav (advisor)
This thesis examines bonded joints of car bodies, which are the most mechanically challenged for selection of suitable, modern adhesives for the construction of the car body. The first part focuses on the description of the bonding technology, including theoretical knowledge related to the use for bonding assemblies for bodywork. The specified structure and its solution is carried out in the way that were selected by three types of adhesives SIKA and mutual comparison of their properties. After that an experimental test is conducted at 18 samples per overhanging shear tensile strength and finally followed by the evaluation and selection of the most appropriate and optimal variant for various bonding applications.
|
|
|
Comparison of steels and technologies in car bodywork production
Wojcik, Rudolf ; Šlais, Miroslav (referee) ; Dohnal, Ivo (advisor)
The project developed in the bachelor study describes the types of steel and technologies of car bodywork. The introductory chapter contains a brief description of the various parts of the body. The distribution, characteristics and uses of steel follow. The summary contains a set of technologies, including hydroforming method, hydro-mechanical forming technology, hot forming technology and tailor-welded blanks.
|
guest ::
