|
|
Vibrations at machining of metals
Fiala, Zdeněk ; Polzer, Aleš (referee) ; Píška, Miroslav (advisor)
The diploma work deals with a mathematical description of vibration and its generation when machining. Moreover, some techniques of modal parameters measurement in the theoretical part are included. The practical part is designed and based on the measured natural frequencies of the machine with specific tool and materials. In conclusion, a lobe diagram stability for semiautomatic lathe SPN 12 CNC and selected machining operation is specified by means of apparatus.
|
|
|
Design of modern speaker body with usage of new technology
Kůst, Martin ; Prokop, Aleš (referee) ; Řehák, Kamil (advisor)
This diploma thesis deals with the analysis and design optimization of a speaker cabinet (enclosure) produced by the additive technology of 3D sand printing. The introductory part is devoted to the theory, both in the field of noise, vibration and the method of their calculations, as well as the theory of speakers and their systems. Numerical and experimental modal analysis is performed, which were compared to determine the mechanical properties of the new material, including material damping. This is followed by experimental and numerical harmonic analysis, with output in the form of a numerical model describing the behaviour of the structure during its excitation. The data are compared with a modal analysis of the internal acoustic space and the critical shapes and their frequencies are determined. At the end of the work, construction modifications are proposed to increase the rigidity of enclosures, the influence of which is evaluated on the created numerical models.
|
|
|
Dynamic analysis of structure loaded seismic loads
Janošková, Lenka ; Nevařil, Aleš (referee) ; Vlk, Zbyněk (advisor)
In this diploma thesis the seismic load on two different models is solved – the first model is a beam hall and the second model is a multistory building. The calculation of seismic load was performed according to standard ČSN EN 1998-1 (Eurocode 8) using the response spectrum analysis and the method of equivalent static forces (substi-tute load). For the combination of seismic responses in different directions are used SRSS and CQC rules. Models and calculations were solved in a student’s version of program RFEM 4.10 (Ing. Software Dlubal, s.r.o.). The comparison of mentioned methods in each models, also the comparison of combinative rules in calculation and the final evaluation of seismic responses on both of models are the subject of this thesis.
|
|
|
Control unit for automatic laboratory manipulation system
Vávra, Tomáš ; Růžek, Václav (referee) ; Dřínovský, Jiří (advisor)
This document deals with devices which are used for the automatic Gram staining. The document starts by a research with the aim to discover existing devices and to compare them to the concept of the device developed by company Biovendor. There is theoretically and then practically dealed with the methods of the rotor imbalance detection and measurement of water-level. The Practical part of this document describes the development of the control unit with the microcontroller ARM Cortex-M3 which will be used for the prototype development of Biovendor’s device. The Last part describes measurement of imbalance of three different rotors with the aid of the control unit.
|
|
|
Vibration Propagation Analysis of Coupled Structure Acoustic Space
Kostelník, Jan ; Pellant, Karel (referee) ; Novotný, Pavel (advisor)
The aim of this Master’s thesis Vibration Propagation Analysis of Coupled Structure Acoustic Space is to analyze vibration propagation in combustion engine, from combustion space through solid structure to fluid surroundings. Then analyze the noise increase as pressure changing in fluid space around the solid structure. There was made a analyze of single piston engine in different frequency and piston location. A simulation of distribution of a pressure waves was made in an ANSYS application.
|
|
|
Study of bearing noise regarding accuracy of machining
Studýnka, Pavel ; Sabo, Karol (referee) ; Klapka, Milan (advisor)
This bachalor thesis deals with connection between the quality of surface of raceways of a bearing and vibrations in operation. This thesis describes basic geometrical parameters of a bearing that have main influence on its resulting quality and vibrations. It presents methods to evaluate the quality of the raceways surfaces and their connection between them. As a part of the thesis is an experiment, which should prove, what is the connection between the measuring of quality of the surface of raceways and measuring the vibrations of bearings during the process, by the way used in the company KOYO Olomouc. The quality of raceways is evaluated on a measuring device MUK-F 300 and vibrations on IL 100R/2000.
|
|
|
Vibration damper development and innovation of a laboratory stand
Filipi, Jaroslav ; Mazůrek, Ivan (referee) ; Nevrlý, Josef (advisor)
Bachelor work deals with description and functionality of vibration dampers. Since the vibration dampers is a wealth of species, work is focusing on the dampers used in cars known as shock absorbers suspension. I have described conventional shock absorbers suspension and modern shock absorbers suspension. Furthermore, I described active chassis. High-quality equipment is very important for the future development of dampers. I propose possible ways of innovation existing laboratory stand.
|
|
|
Effect of vibration on image quality of the electron microscope
Šafář, Pavel ; Horák, Karel (referee) ; Havránek, Zdeněk (advisor)
My thesis focuses on one the parasitic factors influencing an electron microscope during recording - i.e. the vibrations. Their impact on the quality of the shots is crucial and it is thus desirable to discover the origin of the vibrations and the way they are transmitted on the device and also to strive to eliminate this phenomen as much as possible. Measurements to estimate the source of vibration on the device as well as in its surrounding are a part of my work.
|
|
|
Stiffness of Industrial Robot Arm
Vogel, Jan ; Jurčišin,, Miroslav (referee) ; Knoflíček, Radek (advisor)
Stiffness analysis of an arm of an industrial robot with linear kinematics during a drilling operation. For solving this problem are used optical scanners. Finding the optimal cutting force for drilling by criterions: minimal deformation of robots arms and, at the same time, the emerging vibration from the cutting process is also minimal.
|
|
|
Hybrid Energy Harvesting Device
Rasocha, David ; Rubeš, Ondřej (referee) ; Hadaš, Zdeněk (advisor)
This bachelor theasis is focuses on the design of a hybrid piezoelectric vibratory genera-tor. The main idea is to place a permanent magnet on the end of the piezoelectric beam and to place the coil appropriately in order to make a electromagnetic generator. The coil will generate a electrical voltage on load, when the magnetic field is passing throught coil. The piezoelectric beam will also generate voltage, depending on its deformation. For modeling, Femm, Matlab and Simulink will be used.
|
guest ::
