|
|
Multifunctional house in Brno
Liznová, Veronika ; Šubrt, Jan (referee) ; Dulenčín, Juraj (advisor) ; Matějka, Libor (advisor)
In my bachelor’s study I deal with a new building for Multifunctional House in Brno on the Milada Horakova’s street in Brno Zábrdovice. The design comes out from filling the gap on the Milada Horáková street, urbanist regulatives, and the needs of people living in this part of the city. The object’s form is designed to tie together with both the modern and the secession houses sitting alongside it. My effort went towards using the structural gap to its full potential. The facade of the object is formed by windows and sliding steel blinds which also protect it from the street noise. The object also contains public functions which were non-existing in the area until now: a café and office space. Parterre in the 1st LVL allows the passage to the building’s yard and then continues to the IBC building. The rest of the overground floors are used as housing space. The housing itself is made by flats which space category has been chosen based on the interest of city residents.
|
|
|
Multifunctional Building Brno
Čechová, Lucie ; Drobníček, Ladislav (referee) ; Menšíková, Naděžda (advisor) ; Šuhajda, Karel (advisor)
The object of this bachelor thesis is new building solution of a multifunctional house founded on the corner of the streets Táborská and Letní in the district Židenice of city Brno. The design is based on using a vacant lot, urban regulations, the needs for creation of student housing and the needs of residents of the particular district. The form of the object is designed in a way which abides the mass structure of the territory and also the spatial plan of city of Brno. The main aim was to use the vacant lot in the best way possible. The suggested object is divided in two functional units which this particular locality lacked and are based on structural possibilities. The public unit situated on the outer part of the object has the form of fully glazed facade, whereas the part intended for housing can be identified for the use of company Intecon galvanized copper plated trapezodial steel sheet residential containers. The area of the first floor parterre is lowered by one meter below the ground level because of a sports center with a bouldering wall. Other overground storeys consisting of residential containers operate as a place for sudent housing. Individual apartments are formed by the combination of two student rooms. The kitchen and dining room are located in the common areas on each floor of the building. The idea of materially spatial resolution is based on rotation of the cuboid residential containers by ninety degrees which allows them to fit together in a way that creates an atrium in the middle. The atrium and the sports areas are therefore lit by the accomodation areas.
|
|
|
Multifunktional Building Brno
Hurych, Martin ; Ing.Přemysl Pechanec (referee) ; Menšíková, Naděžda (advisor) ; Krupicová, Jana (advisor)
The study of polyfunctional building in Brno city solves a new spaces with residential function and a space for galery activity. The site is finding in vacant lot on a busy street Milady Horákové (urban district – Zábrdovice) in neighborhood residential houses. The construction is incorporated between existing residentianl houses on a flat terrain. The object is divided on two longitudinal tracts. In narrower is placed stairs with lift and sanitary for individual apartments. The wider tract is intended for housing and gallery activity. At ground level is designed as passage serving as pedestrian communication connecting Milady Horákové´s street and courtyard where is existing parking areas and underground garage.
|
|
|
Mixed-use Building in Brno
Nečesaný, Jiří ; Pilný, Ondřej (referee) ; Kalousek, Lubor (advisor)
Seminar work solves project documentation of new-build multifunctional house on the street Generála Píky, Brno-Černá Pole. The building is designed as a four-storey partially basement. On the first floor there will be two commercial units, technical background of the house and storage space for apartments. The second floor will be used for administrative purposes. The third and fourth floors will be used for residential purposes. There are 6 cellars in the basement. The building is designed as barrier-free. Parking of vehicles is designed in the courtyard. On the 4th floor there is an exit to the roof of the building.
|
|
|
Multifunctional Building Brno - Líšeň
Voropai, Oleksandr ; Fišer, Jiří (referee) ; Odvárka, Antonín (advisor) ; Pěnčík, Jan (advisor)
The aim of the thesis was to create the individual degrees of project documentation – documentation for building permit and building design documentation on the basis of the study, processed in the subject AG035. The subject of my bachelor’s thesis is a multifunctional building in the vacant site of Josefy Faimonové Street in the city of Brno-Líšeň. This multifunctional building has three floors. An administration and cafe are located on the ground floor. The first underground floor is divided up into three functional parts; administration, gym and cafe. In the second underground floor there is the garages and technical facilities of the building. The supporting structure is based on reinforced concrete prefabricated skeleton with pre-stressed ceiling panels. The substructure consists of strip footings, castin-place reinforced concrete foots. The roof is designed as flat green roof. Blinding system is made of aluminum frame system with rotating parts pulled with tyvek textile
|
|
|
Multifunctional apartment house
Vtípilová, Jana ; Šubrt, Jan (referee) ; Dulenčín, Juraj (advisor) ; Šuhajda, Karel (advisor)
The bachelor's thesis is the design of a new multifunctional apartment building in Brno in the town district of Pisárka. Designed apartment building is located on Hlinky Street. The building was designed to fit in to the surrounding area. The object respect the building line and its ground plan was planned according to the adjacent objects. There is cafeteria in the ground floor. The first floor is dedicated to office space. In the second floor and third floor there are spacious apartments. Carpark is accessible by car elevator, which transports cars to the basement of the house where individual parking spaces are located. Vehicular access is accesible from the main street.
|
|
|
Multifunctional building Hlinky-Brno
Mádr, Marián ; Elešová, Klára (referee) ; Dulenčín, Juraj (advisor) ; Šuhajda, Karel (advisor)
The subject of the Bachelor´s thesis is the proposal of a new construction polyfunctional house in Brno, located on a plot of land in the city of Brno Střed, Pisárky in the Hlinka street. This is an undeveloped clearance surrounded by neighbour buildings from Eastern and Western sides. The land is currently used as a private car park. The aim of my work is the creation of architectural an urban design, which complements the surrounding buildings. The project solves object that has a single underground floor and five more floors. On the firs floor are located the spaces intended for hire (shops), in the second and third floor areas for administration and fourth and fifth are for housing. Thanks to the utilization of sloping terrain it was also possible to create an object in the underground parking is specified for the users of the object.. To comply with appropriate look of the object and its appropriate integration to the street was important "face game"object. For the purpose of compliance with the consistency and compliance with high altitude were designed French Windows. Grid doors and Windows created a specific order and rhytm. To increase the aesthetic and the smooth expression helps beveled prefabricated panels which is an evidence of diverse traffic operation inside of the proposed building.
|
|
|
Multifunctional building Brno - Líšeň
Mikhaylov, Georgy ; Fišer, Jiří (referee) ; Odvárka, Antonín (advisor) ; Pěnčík, Jan (advisor)
The aim of the thesis was to create the individual degrees of project documentation – documentation for building permit and building design documentation on the basis of the study, processed in the subject AG35. The subject of my bachelor’s thesis is a multifunctional building in the vacant site of Josefy Faimonové Street in the city of Brno-Líšeň. This multifunctional building has three floors. An administration is located on the ground floor. The first underground floor is divided up into three functional parts; administration, educational spaces and cafe. In the second underground floor there is the garages and technical facilities of the building. The supporting structure is based on reinforced concrete prefabricated skeleton with pre-stressed ceiling panels. The substructure consists of strip footings, cast-in-place reinforced concrete foots. The roof is designed as flat green roof. An important element of the object are perforated stainless steel sliding panels which fulfills the function of blinds.
|
|
|
Multifunctional building near little chapel - Židenice
Kovář, Martin ; Elešová, Klára (referee) ; Dulenčín, Juraj (advisor) ; Petříček, Tomáš (advisor)
The subject of my bechelor’s thesis is design of Multifunctional building in Brno – Židenice. Parcel is located in the corner of Táborská and Nezamyslova street, whitch dominates a small chapel. Size of object respects heigh of the adjacent buildings. Architecture composition based on contrast of cubic mass residential portion and dynamic mass with cafe. It also supports different color. By linking produces a harmonious whole dark strict, static and bright form in motion. Thanks to open residential wings in to the corner is posible to shine dispositiont of flats while insert mass of cafe maintain the boundary between public and private. Parking it is located in the underground floor. Parking is available by Autolift Each parking space it is done by parklifts for sixtteen cars. In the Ground floor is Cafe with hinterlands and Entraces of residential portion, there is entrance to the courtyard too. More floors above ground contains flats in size 2+kk and 3+kk.
|
|
|
Multifunctional Building Brno
Kotoulková, Leona ; Drobníček, Ladislav (referee) ; Menšíková, Naděžda (advisor) ; Sobotka, Jindřich (advisor)
This work contains technical drawings, architectural design and architectural detail of the Multifunctional house in Brno, Líšeň district. Basis for this design was taken from my student work of 6. semester. The design is mainly inspired by construction system - module frame container system by Intecom company. The intent is to make the best use of the profile of the terrain, which descends steeply. The building also responds to surrounding prefab developement and to the Novolíšeňská road, which stands for one of the busiest in Brno. The acces to the plot is situated on the opposite side from the road. This driveway is separated from the ascending main road by the supporting wall. A few parking places are situated there. There is also a bus stop in near vicinity, thanks to which is possible to reduce automobile transportation. The building is divided into three blocks. Main two with flats and third, ground-floor, between them serves as a pastry shop. These two main blocks are identical and each of them is axially symmetrical. Each block has four floors, three above and one under ground. A block contains four maisonette flats, four garages, two offices of individual use and shared middle connecting part. The middle connecting part is inspired by a greenhouse. The pavement here is reduced and mostly replaced by grassed floor, which can be used for growing plants. This whole part is sheltered by semipermeable fiberglass. The front-side of the building is covered by light facade Polycon, which also covers the whole front slanted part of the roof. The rest of the building is covered by galvanized trapezoid sheet of tin.
|
guest ::
