|
|
Steel structure of an industrial building
Kopecký, Ladislav ; Pilgr, Milan (referee) ; Sýkora, Karel (advisor)
Industrial hall with storage outbuilding. The length of the hall is 72 meters and width of 30 meters. The main hall has a span 24 meters and the outbuilding has a span 6m. The distance between primary steel frame is 6 meters. The height of the main hall is 10.7 meters and a height of outbuilding is 13.0 metres. The roof is flat with roof slope of 3.5% the main hall and 8.75% outbuilding. The structural system of the hall's bar structure. Primary steel frame is designed as a steel frame rafter with eaves haunch. In the roof structure are designed purlins. The stability of the structure is secured by roof braces and longitudinal braces. The hall is pin-supported on the foundation pad. The hall is clad wall and roof panels PUR. Main hall is equipped with a bridge crane with capacity of 8 tons.
|
|
|
Construction-technological project of production and storage hall
Marek, Jiří ; Hejl, Martin (referee) ; Diaz, Yvetta (advisor)
This diploma thesis deals with construction-technological project of production and storage hall in Hradec Králové. The thesis deals with complex of the implementation of the construction and focuses in more detail on the implementation of both foundation structures and assembly of the steel frame. The project includes a technical report on the construction technology project, a study of the implementation of the main technological stages of the main building, design and assessment of construction routes, construction equipment project, financial and construction schedule, machine design, schedule and budget of the main building, control and test plan for foundation structures, and occupational safety and health.
|
|
|
Construction technological project of a multipurpose sports hall Kojetin
Gregovský, Adam ; Klimszová, Alžběta (referee) ; Diaz, Yvetta (advisor)
The solution of this Diploma thesis is a construction technological project of multipurpose sports hall Kojetín. It contains a comprehensive section for the implementation of this structure. Work in this technological project is included the following elements: inspection and test plan, technological standard, technical reports, the financial plan, the timetable, principles of organization development, budget, maintenance and service life, energy label of the building envelope.
|
|
|
Thermoelectric device for measuring temperature
Melničuk, Petr ; Kandus, Bohumil (referee) ; Podaný, Kamil (advisor)
This thesis presents the application of thermocouples for measuring temperature. Thermocouples are a kind of contact thermometers, thus requiring direct contact with measured substance. Their advantages include great flexibility due to wide choice of material combinations, which makes it possible to achieve various operating temperature ranges, anywhere from -200 to 1800 . Improper choice of thermocouple may result in added systematic error or even render it unusable. Based on literary research, individual configurations, methods of measuring liquids, gases, and solids and their practical applications were presented. Lastly, an experiment was conducted, where three different type 'K' thermocouples were compared and deviations between their measurements were assessed.
|
|
|
Realization preparation University Centre in Zlín
Rokosová, Iva ; Kučera, Zdeněk (referee) ; Kantová, Radka (advisor)
Diploma thesis is focused on the preparation of the implementation of the University Centre in Zlín. The work includes building technology study and subsequent construction technology project. In this thesis, the aim was to determine the time, financial and material demands of the project, choose the optimum process of construction, ensure BOZP, make the proposal buildingsite for the individual stages, the calculation of costs of site preparation and select adequate mechanical the assembly. It was drafted fire assessments of buildings.
|
|
|
Space structure of industry building object
Pelikán, Adam ; Švaříčková,, Ivana (referee) ; Šimůnek, Petr (advisor)
The subject of this project is the structure of the storage hall which is made of reinforced concrete. It is designed as precast frame (span of 18m), founded on pocket footings. The roof deck (non-rigid) consists of ribbed slabs. The cladding is made of sandwich panels (reinforced concrete and isolation) layed on foundation beam. The design is focused on the single typical frame. Roof girder, column and pocket footing are designed. Designed life of the structure is 50 years.
|
|
|
Multipurpose Hospital Building in Český Krumlov - Building Technology Project
Mikulášek, Jiří ; Nečasová, Barbora (referee) ; Liška, Pavel (advisor)
The diploma thesis is focused on the elaboration of a construction technology project for the construction of a new hospital pavilion in Český Krumlov. The thesis processes the preparation of construction and proposal of the organization of individual activities on the construction site in time sequence. The thesis contains technological regulations for the foundation of construction and realization of the monolithic frame on the 1st floor, which also includes drawings of the formwork of the ceiling slab and a scheme of formwork of columns and walls. Further contents are technological report, technological study of realization, transport relations, time and financial plans, complete construction site equipment for the whole construction phase, design of construction mechanisms and assessment of their suitability for use, resource balance, technological analysis, itemized budget, and occupational health protection for selected processes and noise studies dealing with the impact of building construction on the surrounding development.
|
|
|
Distribution warehouses in Prague - construction technology project
Lupač, David ; Selník, Petr (referee) ; Vlčková, Jitka Laura (advisor)
The subject of this thesis is the construction and technological project for distribution warehouses in Prague. Textual part contains a technical report on construction technology project, wider relations of traffic routes with marked critical points, the study of the main technological stages of the building, principles of organization of construction, design of the main building machines and mechanisms, technological regulations, inspection and test plans, health and safety on the site. In the section with attachments there is a map of the locality, drawings of site facilities, including road signs, charts of the movement of machines, the schedule of the main building structure, the budget of the main building structure, a plan for securing material resources, time and financial plan, an economic evaluation of site facilities, details and other technical documentation stages.
|
|
|
Multifunctional house in Karlovy Vary
Růžička, Jiří ; Vlček, Ing Karel (referee) ; Vlček, Milan (advisor)
The project solves a multifunctional Duma building in a vacant lot, contemplated the construction site is located in Carlsbad, in the street Vyhlíce. This is a protected site spa. Part of the project's layout and structural design of the house. It is a six-storey house with an attic and a basement floor. It is designed as a free-standing in the gap as the final house. The layout is divided into two complete units with their own input. There are spaces for business and residential units for permanent housing. Part of the living area are also room house equipment. Inputs to both parts are wheelchair accessible. The house is not wheelchair The house is designed as a brick building of brick masonry Porotherm the module dimensions of 250 (125) mm with reinforced concrete ceilings. Roofed by a hipped roof. The house is located on a private plot of 519 m2 built-up area of 221 m2. The land is gently sloping. The main orientation of the building to the cardinal's east and west. The south wall is adjacent to the neighboring house.
|
|
|
Preparation and realization of the construction of a production hall with administration
Hesková, Veronika ; Jakubíček, Jiří (referee) ; Diaz, Yvetta (advisor)
This diploma thesis solves the construction and technological preparation of the production hall with administration building for company Mont-Tech localized in Brno. The following documents are processed for the project. These are: technical report, coordination situation with wider transport route relationships, time and financial plan for construction, study of the implementation of the main technological stages, design of site facilities, proposal of the main building machines and mechanisms, technological regulations and related control and testing plans. In addition were prepared – the itemized budget of the main buildings, the plan of safety and health protection and construction details.
|
guest ::
