|
|
Water Management Solution of Mlýnka reservoir
Řeháková, Adéla ; Janál,, Petr (referee) ; Starý, Miloš (advisor)
Diploma thesis deals with flood protection at small basin flow Mlýnka. Object of thesis is first design of flood protection – dry reservoir. Part of thesis is theoretical, which describes general design, constructional solution and basic information about operation and maintenance. Next part of thesis describes specific design of dry reservoir. In the end, there are evaluations and comparison with bachelor thesis. Programs, which were used for elaboration, are AutoCAD, ArcGIS, HYDROG, HEC, MS Office.
|
|
| |
|
|
Passive optical networks WDM-PON
Havliš, Ondřej ; Šifta, Radim (referee) ; Münster, Petr (advisor)
The work deals with optical access networks, passive optical networks, especially WDM-PON. Features a modern solution to connect users to the optical access network using optical FTTx connections. Describes the different types of FTTx connections, their parameters and construction technology. Practical work is a practical application of theory for the development of various design and simulation of WDM-PON networks. Each proposal includes the construction of technical solutions optical access networks, the technology used and the balance of the reduced pricing WDM-PON network. The penultimate part of the work consists of design models simulated WDM-PON networks by the simulation program OptSim. The conclusion deals with the evaluation of individual design and simulation of WDM-PON networks.
|
|
|
Steel load-carrying structure of production hall with bridge crane
Štulrajterová, Terézia ; Melcher, Jindřich (referee) ; Karmazínová, Marcela (advisor)
This bachelor thesis deals with the design and assessment of a steel load-bearing structure of a two-aisle production hall. That hall has a rectangular ground plan of a width 32 m (20 + 12 m) and lenght 54,54 m (9 modules distanced 6 m from each other). The main aisle is 10 m high and inside is located a overhead crane with carrying capacity 5 t. The second aisle is used as a storage area for materials that have already been produced. The skeleton of production hall is made of a ten transversal bindings. Lattice trusses are hinged mounted on constraint pillars of solid poles. The hall is situated in the north of the Czech Republic in the city of Děčín.
|
|
|
Supermarket in Olomouc
Brodecká, Denisa ; Bukovská, Pavla (referee) ; Pilgr, Milan (advisor)
The assigment for bachelor thesis was design and check of load-bearing steel structure in Olomouc in Moravia. The ground dimension are 24 x 40 m, height is 10 metres. The building construction is designed as a single hall with double-pitch roof and a slope 9°. Main frame is based on plate frame with anxial range 5 m. Transverse bracing ensure the rigidity of the structure from the plane of the frame. Wall cladding is storage on column and roof cladding is on purlins. The materiál used is steel S235. Bachelor thesis includes the assesment of the main load bearing structure elements, design of the selected details and their drawing solutions.
|
|
|
Implementation of the information system
Anýž, Lukáš ; Machala, Ludvík (referee) ; Novák, Lukáš (advisor)
This master’s thesis deals with the design and implementation of an information system for the company ProSpánek SE. The aim of my work is to assess the requirements for IS and to apply it well in operation. The diploma thesis focuses on the theoretical basis that is necessary for understanding the issue. Then a complete analysis, design and assignment of a suitable new information system to the company. It contains a proposal that contributes to the improvement, faster and lucid operation of the system.
|
|
|
Design of an Information System Part
Topičová, Magdaléna ; Dydowicz, Petr (referee) ; Neuwirth, Bernard (advisor)
The aim of the bachelor’s thesis is to describe the development of a proposal for a constitutive part of an information system in the form of intranet intended for a support of processes in a particular company. In the first section of this paper, basic terms and theory (theories) will be introduced. Subsequently, the status quo in the company will be described. Finally, a proposal for the constitutive part of the information system will be submitted in order to improve its processes.
|
|
|
Scene Analysis Based on the 2D Images
Hejtmánek, Martin ; Drahanský, Martin (referee) ; Orság, Filip (advisor)
This thesis deals with an object surface analysis in a simple scene represented by two-dimensional raster image. It summarizes the most common methods used within this branch of information technology and explains both their advantages and drawbacks. It introduces the design of an surface profile analysis algorithm based on the lighting analysis using knowledge and experiences from previous work. It contains a detailed description of the implemented algorithm and discusses the experimental results. It also brings up options for the possible enhancement of the projected algorithm.
|
|
|
Design and virtual simulation of single-purpose machine
Klement, Petr ; Husák, Michal (referee) ; Kaczmarczyk, Václav (advisor)
The work deals with the design, simulation and construction of a single-purpose machine. The design is to deal with the robotic operation of the coffee machine. The aim of this work is to get acquainted with the design software Siemens NX and its extension packages and with the program Process Simulate, where the designed single-purpose machine dealing with robotic operation of the coffee machine will be designed, simulated and then made machine. In this work I managed to model all the necessary parts that I use in machines such as coffee maker, mug, mug holder, mug turntable, gripper, mug stand, control box and handles for locking individual parts in the cell. Everything was arranged in a cell and then the phases of storing the cups in a shelf, making coffee in a cup from a coffee machine and moving to a dispensing window were simulated.
|
|
|
Traffic flow microsimulation in line management.
Mlčková, Ivana ; Apeltauer, Tomáš (referee) ; Apeltauer, Jiří (advisor)
The main task of this thesis is to verify the line management of traffic. A microsimulation model of traffic was made in program for traffic simulation called Aimsun. The data from radar measuring have been processed and then put into the model. Some of parameters in model were adapted to meet the reality on the road. Finally, there have been suggested more suggestions in this model and the efficiency of the solutions was evaluated.
|
guest ::
