|
|
Residential building
Štepanovský, Stanislav ; Kacálek, Petr (referee) ; Mohelníková, Jitka (advisor)
The subject of the bachelor’s thesis is the preparation of project documentation for the new construction of an apartment building in Brno. The proposed apartment building will be three-story, without a basement, and with a floor area of 305 m. Operationally, the building is divided into ten housing units. On the first floor, there are three apartments with layouts of 1+KK, 2+KK, and 3+KK. One of the apartments with a 2+KK layout is designed as barrier-free. The first floor is further equipped with a utility room, cellar cubicles, a room designated for cleaning, and a pram room. The elevator shaft is made of reinforced concrete with a thickness of 200 mm and is separated from the building by basalt wool with a thickness of 25 mm. The shaft is coated with a dust-free paint and is equipped with a hydraulic elevator, which is not intended for fire evacuation. On the second floor, there are a total of four apartments. Two are designed as 2+KK, while the other two apartments have a 3+KK layout. On the third floor, there are three apartments. One of them is designed as above-standard with a usable area of 148 m. The load-bearing structural system will be solved as masonry made of ceramic blocks, which will be placed on foundation strips of plain concrete. The ceiling structures are designed as monolithic reinforced concrete slabs with a thickness of 250 mm. The balcony slabs are designed as an embedded reinforced concrete cantilever with a slope of 3%. The roof is designed as a walkable flat structure, which has an integrated vegetative layer. The building is thermally insulated with contact basalt wool with a thickness of 160 mm.
|
|
|
Detached house
Dyntarová, Aneta ; Dohnal, Jakub (referee) ; Jelínek, Petr (advisor)
The subject of this bachelor thesis is the preparation of project documentation at the level of construction implementation. The aim was to design a family house with almost zero energy consumption. The new building was designed on a flat building plot on the outskirts of Mlázovice. The family house has two floors with a partial basement and is designed for family of four people. The residential part of the house is roofed with a gable roof with a covering made of ceramic tiles. The garage situated on the north side of the building has a vegetated flat roof. The main load-bearing system is made of ceramic blocks. The perimeter basement masonry is made of lost formwork blocks. Thermal insulation of the building is solved by contact insulation system.
|
|
|
New detached house in Sadová
Okleštěk, Matěj ; Krupicová, Jana (referee) ; Bantová, Sylva (advisor)
This bachelor's thesis addresses the design of a new family house with a business facility, with the project documentation developed at the construction implementation level. The family house is located on a plot in the Sadová area of Brno and is conceived as a detached, partially basement structure with two above-ground floors. It includes a separate garage for the owner and five parking spaces for customers of the business facility. The house is intended for a family of five. Each part of the building has its own separate entrance from the northeast side of the plot and is separated by fencing. The shape of the plot is irregular with a slight slope from north to south. The ground floor (1st floor) of the family house primarily contains communication areas, while the second floor (2nd floor) serves as a quiet zone with living rooms predominantly situated to the south, ensuring adequate sunlight for the building. The basement (1S) will be used for storage purposes. The business facility will be used for the owner’s business, including a barber shop and a photographic studio. The vertical load-bearing walls are made of ceramic blocks filled with mineral wool (e.g., Porotherm T Profi), eliminating the need for external insulation of the entire building. The horizontal structures are monolithic reinforced concrete, and the entire building is founded on strip foundations, which will be stepped for the basement part. Both the family house and the business facility are covered with a flat, non-walkable roof. The facade of the two-story family house is finished with white silicone plaster with slate cladding elements between the windows, while the facade of the business facility is entirely clad in anthracite-colored slate.
|
|
|
Apartment building
Pokorný, Václav ; Utíkal, Aleš (referee) ; Utíkalová, Ivana (advisor)
The subject of this bachelor’s thesis is the design of apartment building and the development of project documentation at the level of documentation for construction building. The new apartment building is located on the outskirts of Jihlava in the Helenín district. The building is designed as five floors building with a partial basement. It contains 12 apartment units with dispositions of 2+kk, 3+kk, 5+kk, which complement cellar cubicles and common areas for the residents of the building. The entrance to the building is located on the north side of the building. Vertical load-bearing and non-load bearing walls are designed from ceramic blocks of the POROTHERM system. The walls of the lift shaft are designed as cast-in-place reinforced concrete. The ETICS insulation contact system will be used to insulate the building. The foundation strips are designed from plain concrete and are connected to the partial basement part of the building with gradations. The foundation slab under the lift landing is designed from reinforced concrete. The horizontal structures are designed as cast-in-place reinforced concrete two-way slab and cantilever slab (at loggias). The roof of the building is designed as a single flat green roof (extensive). Within part of bachelor’s thesis is too designed construction physics and the fire safety solution of the building. Materials and colours were selected in accordance with the surrounding buildings.
|
|
|
Technological stage of the rough superstructure of an apartment building
Čečotka, Daniele ; Řihák, Pavel (referee) ; Kantová, Radka (advisor)
The subject of my bachelor's thesis was the development of selected parts of the technological project for building the Community Center in Třanovice. I specifically focused on the stage of the rough upper construction. The building's structure consists of load-bearing perimeter walls made of ceramic blocks and a semi-prefabricated ceiling structure. This thesis includes the design of transport routes, technological procedures, inspection and testing plans, the timeline for the selected part, an itemized budget for the selected part, and the proposal for machinery for this stage. The work also includes the site layout concept, including a technical report, a detailed bill of quantities for the masonry, and a list of materials for the described technological procedures. In the final part of the thesis, an alternative design for the ceiling structure is presented, along with a proposal for revising the project documentation according to modular coordination and selected construction details.
|
|
|
Apartment build in Valašském Meziříčí
Honešová, Veronika ; Pěnčík, Jan (referee) ; Dohnal, Jakub (advisor)
The bachelor's thesis focuses on the design of a new apartment building with a basement, for which project documentation for construction implementation is being prepared. The proposed apartment building is located in Valašské Meziříčí and is designed as a standalone structure with a basement, three above-ground floors, and an underground garage. The apartment building is designed for families of three to four members and consists of four residential units. The entrance to the building is situated on the northern side. On the ground floor, there is an entrance common hallway with a staircase. From the hallway, two apartments of 3+kk can be accessed. On the first floor, there is a 3+kk apartment and a 4+kk maisonette apartment. On the second floor, there is a part of the maisonette apartment. In the basement, there are garages. Each residential unit has a terrace or balcony and one parking space. The building is insulated with the ETICS contact system and is designed from POROTHERM ceramic masonry elements, with horizontal structures being reinforced concrete monoliths, and the entire building is founded on strip foundations. The apartment building is designed with a flat roof. The facade will be finished with a white thin-layer silicone plaster or facade panels with a wood imitation.
|
|
|
Apartment building
Lužná, Hana ; Lavický, Miloš (referee) ; Matějka, Libor (advisor)
The subject of the bachelor thesis is the preparation of project documentation for the new construction of an apartment building in Prostějov. The building has four above-ground and one underground floors. The terrain around the building is slightly sloping. There are a total of nine apartments in the above-ground units ranging in size from 1+kk to 5+kk. On the first above-ground floor, a wheelhouse, a carriage room, a cleaning room, a technical room and an air conditioning machine room are designed. There are also designed cellar cubicles for individual apartments. On the first underground floor, a collective garage with parking for eight cars. Wall construction system. Support structures made of Porotherm blocks. The ceilings are made of reinforced concrete monolithic ceiling slabs. The roof is designed as a flat vegetation roof. The building is based on foundation strips made of simple concrete. Columns designed reinforced concrete footings.
|
|
|
Residential building
Muhamed, Noshdar ; Vorlíčková, Petra (referee) ; Kalousek, Miloš (advisor)
The subject of the bachelor thesis is a new building of an apartment building and elaboration of documentation for construction. The apartment building is located in the spa town in Teplice. The proposed building is designed as a separate, basement, with three above -ground floors, seated on a slightly sloping terrain. In the basement there is the technical background of the apartment building together with cellar cores for individual apartments. On the first floor there are two apartments and one apartment with its own front garden. On the second floor there are two apartments with their own balconies. On the third floor there are two flats as on the second floor. In front of the building there is a large parking lot, the apartment building is designed barrier -free thanks to the internal elevator. The construction system of the building is wall, two -way, above ground floors are brick of ceramic blocks. The peripheral masonry of the basement is bricked from the lost formwork. The horizontal load -bearing structures are prefamonolithic, composed of sweat beams and ceramic inserts Miako. The building is based on the foundation passports and covered with a single -shed flat roof.
|
|
|
Detached house Křenovičák
Pagáčová, Nikola ; Kolář, Radim (referee) ; Jelínek, Petr (advisor)
The aim of the bachelor´s project is to design a single-family detached house ,,Křenovičák”. The thesis has two parts: the project documentation for a building permit, and documentation of heating systems, etc. The house is located in Křenovice u Slavkova. It´s make an L-shape. The ground floor has partly a roof slab with a green roof, the first floor has a roof slab with aggregate. Floor slab over first floor is partly supported by three columns. On the first floor, you can find a lobby, a corridor, a bathroom, an utility room, a study room, and living space connected with a kitchen and dining space next to terrace. On the second floor is a master bedroom, two separate rooms for children, a bathroom, a separate toilet, and another study room. Walls are from ceramic blocks and slabs are from precast concrete panels. There´s ground-water heat pump with ground well connected with floor heating system and 200 litres hot water cylinder. House using water mains and main sewer. Main concept design is focused on mechanical ventilation system with heat recovery. Ventilation rate is 400 m3/h, because of cooker hood. There´s equal pressure ventilation. Fans are connected to supply by flexible ducts. House is connected to electricity grid. On the higher roof are photovoltaic panels to generate electricity. Excess energy is stored in batteries. Supply ducts and pipes are in ceiling voids. The documentation is included Energy Performance Certificate.
|
|
|
Apartment building Blansko-Písečná
Flek, Vojtěch ; Lipka, Miroslav (referee) ; Eliáš, Luboš (advisor)
The subject of the bachelor's thesis is the development of project documentation for the new construction of an apartment building in Blansko. The building has four above-ground floors. The main entrances to the building are located on the first floor above ground. There are sixteen apartment units in the building, which are connected by a common corridor. On the ground floor there are garages, cellar boxes, storage, carriage house, technical and cleaning room. The other floors are intended for living only. The structural system of the object is designed as a wall system. The foundation will be solved with foundation passes made of plain concrete. The ceilings are monolithic reinforced concrete slabs. The roof is designed flat with a coating of polyolefin film. The bachelor's thesis contains project documentation for the implementation of the construction.
|
guest ::
