|
|
Energy-saving family house in Šumice
Jurák, Štěpán ; Rubinová, Olga (referee) ; Počinková, Marcela (advisor)
The aim of the bachelor's thesis is to design a energy-saving detached house located on the outskirts in the village of Šumice, located of Uherské Hradiště district. The house consists of two floors, with a second-floor step-in terrace, a flat sedum roof on the top, and a one-car garage. The main entrance is facing the northwest. The social area of the house is on the first floor, including a dressing room, a utility room, a bathroom, a toilet, a study room, and a living room that is connected to the kitchen and dining room. The quiet zone is on the second floor, consisting of two children's rooms, a master bedroom with a walk-in closet, a bathroom, a toilet, and a small storage room. The house is based on concrete foundation strips. The vertical load-bearing structures are designed from ceramic blocks with thermal insulation. Horizontal load-bearing structures are reinforced concrete slabs. The building is heated by the air-water heat pump. The main heating system is a floor heating system combined with radiators and towel radiators. The utility room is designed with mechanical ventilation with a heat recovery unit. Exhaust and intake are located on the north facade. Fresh air is supplied in living rooms and exhaust air suction in the garage, bathrooms, and walk-in closet. The building is connected to the water mains and the combined sewer. In the heat pump is installed a hot water cylinder. Stormwater accumulated in the tank then used for toilet flushing and watering the garden.
|
|
|
Small apartment building
Kalčík, Aleš ; Bečkovský, David (referee) ; Vystrčil, Jan (advisor)
The subject of the bachelor's thesis is the preparation of construction documentation for a small apartment building. The building is located on an almost perfectly flat area near the Morava River in Napajedla. The structure of the building consists of four above-ground floors and one underground floor, which is completely hidden below the terrain. The underground floor contains a technical room and communal garages. The above-ground floors contain a total of 12 apartment units and accessory spaces for these apartments. The estimated number of residents of the building is 34. None of the apartment units are designed to be barrier-free. However, access to the building is barrier-free, and the parking spaces include designated spots for the handicapped. The substructure is founded on piles, followed by monolithic reinforced concrete structures. These reinforced concrete structures transition to traditional masonry construction in the first above-ground floor, using a combination of ceramic blocks and monolithic reinforced concrete ceiling structures. The roof of the building is intended to be a flat green roof with extensive vegetation.
|
|
|
Apartment building
Kolda, Martin ; Kacálek, Petr (referee) ; Sedláková, Markéta (advisor)
The task of the bachelor's thesis is to prepare a project in the documentation phase for the construction of an object with almost zero energy consumption. The object of the bachelor's thesis is an apartment building with a basement with four above-ground floors. The apartment building is located on a flat plot on the southern edge of the town of Přelouč. There is a hairdresser with facilities on the first floor, and a total of 11 apartments on the second to fourth floors. The foundation structures are formed by plain concrete belts. Horizontal load-bearing structures with reinforced concrete plates. The vertical load-bearing structures in the underground floor are made of lost formwork fittings, in the above-ground floors by ceramic blocks. The roof of the building consists of a flat, single-skinned roof. The building is insulated by the ETICS system.
|
|
|
Single-family house in Nový Jičín
Holiš, Jakub ; Sukop, Lukáš (referee) ; Ostrý, Milan (advisor)
Purpose of the bachelor´s thesis is to design single-family low energy house. House is located in Nový Jičín, a town located in Moravian-Silesian region. Building has two floors and detached garage. Both garage and house have a flat roof. Main entrance is located between garage and house itself. On one part of the first floor there is a big open living room with kitchen and dining area. Second part of the first floor has bathroom, separated toilet, hall, entry, and utility room. Second floor has two bedrooms and master bedroom. Another bathroom, study and walk in closets are also present here. Vertical load bearing structures are made of sand-lime bricks. Horizontal load bearing structures and staircase are made from reinforced concrete. Windows are wooden with aluminium exterior. Heating of the house and hot water will be secured by air-water heat pump in split mode. Hot water for heating will be stored in accumulation tank and distributed throughout the house thanks to the floor heating system. There is mechanical ventilation and heat recovery unit installed. House Is connected to public drinking water infrastructure and city sewerage system. Electricity is provided by the grid. Rainwater is stored in underground accumulation tank with connection to underground drainage system.
|
|
|
Family house with cinema room
Kurka, Štěpán ; Pobucká, Slávka (referee) ; Sobotka, Jindřich (advisor)
As part of the bachelor's thesis, project documentation was developed at the construction implementation level within the partially required scope. The documentation includes a project for a family house located in the northern part of the village of Kobeřice in Silesia. The new building is integrated into an already developed area of the village and is set into the terrain, taking advantage of the sloping land for the operational solution. The building is designed as a single dwelling unit for permanent residence by five people, with technical facilities and garage space. Access to the dwelling unit is provided from the west side to the first above-ground floor. From a material perspective, the building is designed using predominantly ceramic blocks for both load-bearing and non-load-bearing vertical structures. The building envelope is insulated with an ETICS system to reduce energy consumption. The construction is based on monolithic foundation strips with a base concrete slab. The ceiling structures in the building are made of monolithic reinforced concrete slabs. The building is roofed with two flat single-layer roofs at different height levels. The roof at the lower level is designed with a vegetative surface finish.
|
|
|
Technological stage of the upper rough construction of an apartment building in Brno
Klech, Ivo ; Strádalová, Aneta (referee) ; Kantová, Radka (advisor)
The main aim of my bachelor thesis is the construction technological solution of the rough upper construction of the residential building located in Brno in Sadová street. This thesis contains a technical report of the given technological stage, a situation of the building with broader relations of transport routes, a statement of dimensions for the technological stage, a technological regulation including a balance of resources with a variant solution of the partition masonry, a drawing of the construction site equipment together with the technical report, timetables with a variant solution, a design of the machine assembly, an inspection and testing plan for the masonry stage and ensuring work safety. The last chapter of this work is the itemized budget for the variant solutions and selected construction details.
|
|
|
Survey, Diagnostics and Design of Reconstruction
Novotný, David ; Heřmánková, Věra (referee) ; Anton, Ondřej (advisor)
The subject of this thesis is the diagnostic investigation of block A in the object at Rumiště 8, Brno. The work includes theoretical knowledge of technical surveys and diagnostic methods and their evaluation to identify the essential characteristics of masonry and timber structures. In the practical part is the diagnostic investigation processed. Part of the diagnostic investigation is the determination of material characteristics of the structure. At the end of the thesis is an assessment of the structure.
|
|
|
Residential building
Šeps, Daniel ; Bartlová, Jana (referee) ; Vajkay, František (advisor)
The subject of the bachelor thesis is the design of a new building of a detached apartment building in Nová Paka in the form of project documentation for construction. The buiding is designed brick with reinforced concrete ceilings. Perimeter walls on the 1st – 3rd floor is designed ceramic brick blocks th. 300 mm with contact thermal insulation system ETICS th. 200mm, which will be equipped with silicone plaster 1,5mm. Perimeter walls on the underground floor is designed permanent shuttering DITTON 30 th. 300mm, filled with concrete C20/25 XC1 and by steel B500B insulated with extruded polystyrene XPS th. 160mm. Internal load-bearing masonry wall is designed with acoustic ceramic brick blocks th. 250 mm. Partitions are designed from acoustic partition walls. On the ceilings is a hardwood flooring because of excellent acoustic characteristics. The roof is designed as a flat green roof with extensive vegetation and with thermal isolation of minera wool and with waterproofing layer made of bituminous modified SBS strips laid in two layers. Balcony railing is designed aluminous with safety glass paneling.
|
|
|
Survey and Diagnostics of Building Construction
Vítková, Barbora ; Heřmánková, Věra (referee) ; Anton, Ondřej (advisor)
The subject of this diploma thesis is the diagnostic survey of the masonry walls and the connecting bridge in the East Moat of Špilberk Castle. The thesis contains theoretical information about survey and diagnostics of building construction and then evaluation of diagnostic methods used for estimation of essential characteristics of masonry structures. In the practical part the diagnostic investigation of Špilberk Castle walls is processed. That includes determination of material characteristics of the studied structure. In the conclusion there is a suggestion of how to eliminate the structural defects found during the survey.
|
|
| |
guest ::
