|
|
Multifunctional building
Svoboda, Tomáš ; Pospíšil, Tomáš (referee) ; Pěnčík, Jan (advisor)
This is a detached multifunctional building in the construction of commercial and residential buildings. The building is located in České Budějovice. Multifunctional building has five floors, one underground floor and a partial basement. The building is covered single-surface vegetation and double skin roof rack. On the first floor is a multifunctional building with reception vestibule, hall of which are accessible to all businesses and also the staircase space. The first floor is also a cafe, spatially separated from the multifunctional building. The café includes restrooms and stairs to get to the hinterland own cafe, where there is room for staff, toilet and are relevant warehouses drinks and other amenities. On the second floor there is a fitness center with all facilities and sanitary facilities. The gym also includes a reception and a health food store. In the third to fifth floor are residential units. A total of 5 apartments, where 2 and 3 flats are always identical. The building is based on foundation strips of plain concrete and masonry made of POROTHERM building system with a contact system of the company ISOVER. The project has been prepared complete documentation of new multifunctional building at the level of documentation for construction. Design of the building emphasizes the static and layout, fire safety, energy savings and safety in use. Drawing documentation was realized in ArchiCAD.
|
|
|
Gesture Recognition
Svoboda, Tomáš ; Mlích, Jozef (referee) ; Hradiš, Michal (advisor)
This Bachelor's thesis is engaged in recognition hand gestures. The advantages and disavantages of various color models for skin color detection are discussed here. Skin is detected by look-up table. Look-up table is created from histogram of skin color and optional from Gaussian distribution, whose parameters are estimated from histogram. Hidden Markov models are used for gesture classification. The HTK toolkit have been used for working with the models. Own decoder of Hidden Markov models based on Viterbi algorithm was created for real-time gesture recognition. Several experiments were accomplished with data sets for 4 gestures. The results of the experiments are very good.
|
|
|
Detection, Localization and Recognition of Traffic Signs
Svoboda, Tomáš ; Juránek, Roman (referee) ; Herout, Adam (advisor)
This master's thesis deals with the localization, detection and recognition of traffic signs. The possibilities of selection of areas with possible traffic signs occurrence are analysed. The properties of different kinds of features used for traffic signs recognition are described next. It focuses on the features based on histogram of oriented gradients. Some possible classifiers are discussed, in the first place the cascade of support vector machines, which are used in resulting system. A description of the system implementation and data sets for 5 types of traffic signs is part of this thesis. Many experiments were accomplished with created system. The results of the experiments are very good. New datasets were acquired from approximately 9 hours of processed video sequences. There are about 13 500 images in these datasets.
|
|
|
Design of Diesel Aircraft Engine One-cylinder Engine with Contra Rotating Pistons
Svoboda, Tomáš ; Drápal, Lubomír (referee) ; Novotný, Pavel (advisor)
Diploma thesis deals with design of crankshaft for two stroke opposed piston diesel engine. In the theoretical research part a history, comparison with competitive engines in nowadays light aircrafts and the advantages of opposed piston engines are mentioned. In the practical part the balancing is chosen and CAD model of crankshaft is designed. Geometry of this model is than checked for fatigue damage fallout. In the final part was chosen the propeller and appropriate reduction gearbox.
|
|
|
Bridge over the Kyselá voda brook valley
Svoboda, Tomáš ; Řehulka, Martin (referee) ; Panáček, Josef (advisor)
The subject of the diploma thesis is the design of the ghrinder bridge over the Kyselá voda brook valley. The main topic is static calculation of supporting construction of six span structure. Two studies were executed and the second option, pre-stressed girder bridge was chosen. The lenght of the spans is 27 + 6 x 35 + 27 m. Static model and effect of loading are solved in software Scia Engineer. Reviews are calculated by hand according to current standards.
|
|
|
Titania suspensions for material printing
Svoboda, Tomáš ; Drbohlavová, Jana (referee) ; Dzik, Petr (advisor)
This bachelor‘s thesis deals with the preparation of stable suspensions of titanium dioxide applicable for material printing. A wide range of dispersive environments stabilizing the nanoparticles of titanium dioxide was investigated. Commercially available aqueous dispersion and dry titania powder was used as the source of TiO2.The properties of prepared suspensions were evaluated and the most suitable suspension was used for material printing. This thesis focused on suspension‘s stability, sizes of particles dispersed in them, and in their rheological behavior. Furthermore, we analyzed the studied the properties of printed layers by SEM, optical microscopy, DLS and analytical centrifuge. We also evaluated the photocatalytic activity by monitoring the oxidation rate of coumarin to 7-hydroxycoumarin.
|
|
|
Design of mobile chipper
Svoboda, Tomáš ; Šuranský, Michal (referee) ; Brandejs, Jan (advisor)
The Bachelor thesis deals with the structural design of a mobile chipper that uses mass-produced compact tractors VARI as its energy sources. This Bachelor thesis is divided into four main chapters: a description of the basic technology used for processing natural materials that is characteristic of this type of equipment, the current state of structural details of compact tractors VARI and their equipment, a detailed study of technical aspects of the compact tractor providing the power, various drafts of possible solutions with a presentation of a functional home-made prototype, and a detailed description of the final version of the design. The thesis also includes an approximate calculation of the maximal possible diameter of the processed material and a technical drawing.
|
|
| |
|
|
Single cylinder engines enduro category
Svoboda, Tomáš ; Beran, Martin (referee) ; Vančura, Jan (advisor)
Bachelor thesis deals with the description of typical enduro motorcycle engine and describes its main parts. Next volume concern about chosen types of enduro motorcycles and its en-gines. Achievement of every single engine is shown in dynamometric diagrams. Maintenance schedule which is affected by given achievements is shown in tables. The engines of enduro motorcycles have been partly compared with motocross motorcycle engines
|
|
|
Family business house
Svoboda, Tomáš ; Papranec, Michal (referee) ; Fuciman, Ondřej (advisor)
The project has been prepared complete documentation of new building to family business house the level of documentation for building construction. The building is without basement with two floors. House is designed for a family of four to five. Premises will be used as a law office. The building is designed completely from the system POROTHERM. The roof is designed with gable roof. The proposal emphasizes the object static and layout, fire safety, energy saving and safety in use. Design documentation was implemented in the program ArchiCAD. The building is designed for year-round living.
|
guest ::
RSS feed.