|
|
The Block of Flats
Greksová, Timea ; Hnízdilová, Aneta Aya (referee) ; Manychová, Monika (advisor)
The subject of this bachelor´s thesis is the development of project documentation for the new construction of an apartment building. The land is on a gentle slope, undeveloped and grassy. The proposal respects the surrounding development and it fits into plan of the city of Banská Bystrica. The main entrance to the building is located on the north side of the building, but the ground-floor apartments on the south side have access to a terrace with a garden. The building has three above-ground and one partially underground floor. In the basement there are storage areas, a bicycle shed, a drying room and a technical and cleaning room. There are a total of 6 apartment units in the building, which are accessible from common areas with stairs and an elevator. The structural system of the building is designed as a wall system, based on foundation made of plain concrete. The ceilings consist of a folded ceramic ceiling made of beams and inserts. The roof is designed as flat with an asphalt belt covering.
|
|
|
Single-family house
Gilar, Matěj ; Nespěšný, Ondřej (referee) ; Bečkovský, David (advisor)
The bachelor thesis deals with the creation of project documentation for the construction of a family house. The house has two floors. The terrain of the land is slightly sloping. The main building material is Ytong aerated concrete blocks. The building is based on the foundation strips. The ceiling structures are made of reinforced concrete monolithic slabs. The roofing consists of a flat roof. The external walls are insulated with mineral thermal insulation boards.
|
|
|
The technological stage of the rough substructure of OÚ Ostrá
Kholodniak, Marko ; Doubek, Rostislav (referee) ; Biely, Boris (advisor)
The bachelor's thesis is focused on the implementation and reconstruction of the lower gross structure of the municipal office in Ostrá. The original building has one underground floor, one above ground floor and a non-residential floor. The building is based in a flat manner on the foundation strips, the vertical load-bearing structures are made of full-burnt bricks, the horizontal load-bearing structures above the 1.PP are formed by a monolithic beam ceiling and a reinforced concrete slab supplemented with a steel beam. The extension will have one above-ground floor and one underground floor. The extension will be based on a base plate supplemented with foundation belts around the perimeter of the base plate, which, however, will not have a load-bearing function. The vertical supporting structures will be completely covered with the POROTHERM system, the ceiling above the 1st PP extension will be ŽB monolithic. The work contains a technical report with a focus on the selected technological stage, the situation of the building with wider traffic relations of the transport routes, a list of measures, a technological regulation for the implementation of foundation structures, a drawing and report of the construction site equipment, a time schedule, a design of the machine assembly, an inspection and test plan for the implementation of the foundation construction, safety and health protection at work.
|
|
|
Residential building
Štepanovský, Stanislav ; Kacálek, Petr (referee) ; Mohelníková, Jitka (advisor)
The subject of the bachelor’s thesis is the preparation of project documentation for the new construction of an apartment building in Brno. The proposed apartment building will be three-story, without a basement, and with a floor area of 305 m. Operationally, the building is divided into ten housing units. On the first floor, there are three apartments with layouts of 1+KK, 2+KK, and 3+KK. One of the apartments with a 2+KK layout is designed as barrier-free. The first floor is further equipped with a utility room, cellar cubicles, a room designated for cleaning, and a pram room. The elevator shaft is made of reinforced concrete with a thickness of 200 mm and is separated from the building by basalt wool with a thickness of 25 mm. The shaft is coated with a dust-free paint and is equipped with a hydraulic elevator, which is not intended for fire evacuation. On the second floor, there are a total of four apartments. Two are designed as 2+KK, while the other two apartments have a 3+KK layout. On the third floor, there are three apartments. One of them is designed as above-standard with a usable area of 148 m. The load-bearing structural system will be solved as masonry made of ceramic blocks, which will be placed on foundation strips of plain concrete. The ceiling structures are designed as monolithic reinforced concrete slabs with a thickness of 250 mm. The balcony slabs are designed as an embedded reinforced concrete cantilever with a slope of 3%. The roof is designed as a walkable flat structure, which has an integrated vegetative layer. The building is thermally insulated with contact basalt wool with a thickness of 160 mm.
|
|
|
The Block of Flats
Trmal, Tomáš ; Hnízdilová, Aneta Aya (referee) ; Manychová, Monika (advisor)
The subject of bachelor's thesis is the new construction of an apartment building with near-zero energy consumption and the drafting of documentation for the construction implementation. The apartment building is located in the district of Brno – Nový Lískovec, on Kamínky street. The building is situated on a side street away from the main road. The proposed structure is designed as a standalone, partially basement, with three story building, set into sloping terrain. The basement contains the technical facilities of the apartment building along with storage rooms for individual apartments. On the first floor includes two apartments with their own balconies, as well as communal areas for bicycles and strollers. On the second floor each have two apartments with their own balconies. On the third floor each have two apartments with their own balconies. Next to the building is a parking lot for the apartment owners, behind the building is created a garden for social activities. The apartment building is designed to be barrier-free access thanks to an internal elevator. The structural system of the building is a transverse wall system. The ground floors above are built from ceramic blocks. The perimeter walls of the basement are constructed from concrete blocks with permanent formwork. The horizontal load-bearing structures are semi-prefabricated, composed of POT beams and Miako ceramic inserts. The building is built on strip foundations and is roofed with a single-layer flat roof.
|
|
|
Family House with Workshop
Klimeš, Adam ; Zichová, Barbora (referee) ; Košíčková, Ivana (advisor)
The subject of the bachelor's thesis is the project documentation of a family house with an establishment located in Brno, Soběšice. The shape of the house is designed in an L-shape. The house has two floors and a basement. The house is divided into two parts: a residential area and an office. There are two main entrances leading to the residential part and the establishment, and two side entrances. The structural system of the building is designed as a wall system. The house is founded on strip foundations. The roof structure is designed as a flat roof, and the roof above the living room is designed as a green roof.
|
|
|
Apartment building
Pokorný, Václav ; Utíkal, Aleš (referee) ; Utíkalová, Ivana (advisor)
The subject of this bachelor’s thesis is the design of apartment building and the development of project documentation at the level of documentation for construction building. The new apartment building is located on the outskirts of Jihlava in the Helenín district. The building is designed as five floors building with a partial basement. It contains 12 apartment units with dispositions of 2+kk, 3+kk, 5+kk, which complement cellar cubicles and common areas for the residents of the building. The entrance to the building is located on the north side of the building. Vertical load-bearing and non-load bearing walls are designed from ceramic blocks of the POROTHERM system. The walls of the lift shaft are designed as cast-in-place reinforced concrete. The ETICS insulation contact system will be used to insulate the building. The foundation strips are designed from plain concrete and are connected to the partial basement part of the building with gradations. The foundation slab under the lift landing is designed from reinforced concrete. The horizontal structures are designed as cast-in-place reinforced concrete two-way slab and cantilever slab (at loggias). The roof of the building is designed as a single flat green roof (extensive). Within part of bachelor’s thesis is too designed construction physics and the fire safety solution of the building. Materials and colours were selected in accordance with the surrounding buildings.
|
|
|
Single family home Chudčice
Andrlová, Anna ; Müllerová, Eva (referee) ; Müller, Jan (advisor)
The subject of the bachelor thesis is the design of the specified part of the project documentation for the construction of a family house on a slope in the village Chudčice. The family house is designed as a two-story for a family of four. The building is located on a plot with sloping terrain. The family house is based on plain concrete foundations. The vertical supporting structures are designed from ceramic blocks of the Porotherm system, and the perimeter masonry is insulated with the ETICS contact system. Horizontal structures are designed as monolithic reinforced concrete. The building is covered with a flat roof. The main entrance to the building is located on the north side on the 1.NP. The family house is divided into a quiet part, a living part and a technical part. The building includes a carport for two cars and an outdoor terrace.
|
|
|
Apartment building
Kolda, Martin ; Kacálek, Petr (referee) ; Sedláková, Markéta (advisor)
The task of the bachelor's thesis is to prepare a project in the documentation phase for the construction of an object with almost zero energy consumption. The object of the bachelor's thesis is an apartment building with a basement with four above-ground floors. The apartment building is located on a flat plot on the southern edge of the town of Přelouč. There is a hairdresser with facilities on the first floor, and a total of 11 apartments on the second to fourth floors. The foundation structures are formed by plain concrete belts. Horizontal load-bearing structures with reinforced concrete plates. The vertical load-bearing structures in the underground floor are made of lost formwork fittings, in the above-ground floors by ceramic blocks. The roof of the building consists of a flat, single-skinned roof. The building is insulated by the ETICS system.
|
|
|
Apartment building
Vídenský, Martin ; Vystrčil, Jan (referee) ; Šuhajda, Karel (advisor)
The subject of the bachelor's thesis was the preparation of project documentation at the construction stage for the new construction of an apartment building. The apartment building is located in Telč and is located on flat terrain. It is designed as a free-standing structure with three above-ground and one underground floors. There are a total of 12 apartment units of various sizes on the above-ground floors, 4 on each floor. The underground floor contains the building's technical facilities, a cellar cubicle, a storage room, a cleaning room, a bike room and a private gym intended only for residents of the building. The individual floors are connected by a three-arm staircase and an elevator. The building is based on foundations and the roof is covered with a flat vegetated roof. The perimeter structures of the underground floor are designed from concrete hollow blocks, and in the above-ground floors from ceramic fittings. The vertical structure of the elevator shaft is designed as a reinforced concrete wall, the other vertical internal walls are designed from ceramic fittings. The ceiling structure is designed as ceramic concrete from beams and inserts. The perimeter masonry is insulated with a contact insulation system.
|
guest ::
