|
|
Evaluation of the development potential of the production restriction plan for PV and Wind power plant
Petryšak, Vladimír ; Pistora, Martin (referee) ; Bátora, Branislav (advisor)
This thesis deals with evaluation of the development potential of the Production restriction plan for PV and Wind power plant. The aim of the thesis is to analyze the possibilities of integrating various types of renewable energy sources into this plan, which aims to regulate electricity production from these sources in extraordinary situations. The thesis describes current technical and legislative possibilities for curtailing renewable sources used in the Production restriction plan, addresses the obligations of electricity producers, and proposes recommendations for further development of the Production restiction plan for renewable energy sources (RES).
|
|
|
Tracked vehicle for attachment of the service
Moša, Jan ; Škopán, Miroslav (referee) ; Kašpárek, Jaroslav (advisor)
This bachelor's thesis deals with the design of a remote-controlled tracked vehicle. In the first part of the work, short research with a market comparison was prepared. Subsequently, a conceptual design of the vehicle was developed. Initially, performance and power calculations were made, according to which design components were chosen. Then a separate vehicle structure was made. At the end of the work, the selected parts were checked for strength. The result of the work is a complete conceptual design of the vehicle with drawings of selected components.
|
|
|
Strain, stress and strength analysis of the truss construction.
Hladký, Maroš ; Horníková, Jana (referee) ; Vrbka, Jan (advisor)
The thesis is focused on strain, strength, and strain analysis of planar truss construction. The purpose of this work is to determine the load on each rod, and to assess the safety against limit states. After determining the primary characteristics, the structure will be modified and load and safety re-calculated. Depending on the outcome, the design will be changed again. Next, will be destined gravity affect on the design and impact of production inaccuracy. Deformation of structure will be calculated.
|
|
|
Tracked vehicle for working on a slope
Těšický, Petr ; Urbánek, Michal (referee) ; Kašpárek, Jaroslav (advisor)
This bachelor thesis deals with the conceptual design of a remotely controlled tracked vehicle for work on a slope. In the first part, a short research analysis of remotely controlled tracked vehicles is performed. During the design of the concept itself, dimensional, force and power calculations are performed. The design of some components is based on these calculations. Strength calculations for certain components are performed in the last part of this work. The result is a conceptual design of a remotely controlled tracked vehicle.
|
|
|
Distributed Generation and its Influence on Power Quality
Bernáth, František ; Santarius, Pavel (referee) ; Braciník,, Peter (referee) ; Mastný, Petr (advisor)
This work deals with the deployment of distributed power sources into the electric power grid. The nature of these sources causes that the massive integration may experience problems with power quality in the local context, and also overall reliability of supply in the range of interconnected power systems may be endangered. Work is focused on local voltage quality problems with special emphasis on analysis and design of tools (e.g. reactive power compensation units of power plants or dynamic voltage control by transformers 110/22kV) for voltage control in power distribution systems. These tools should be used as a part of uniform concept of voltage control. The proposed concept is involved.
|
|
|
Regulation options of renewable energy sources
Pavlíček, Jiří ; Morávek, Jan (referee) ; Pěcha, Jiří (advisor)
This bachelor's thesis deals with the regulation of renewable energy sources. It focuses on ways of managing and possibilities of regulation renewable energy resources. Indicates the proportion of various types of renewable energy sources in electricity production and their representation in the electrical load profile. Thesis describes the various storage systems, which can be used to stabilize the renewable energy sources. Evaluate the applicability of these storage systems in the energy sector.
|
|
|
Tracked vehicle for working on a slope
Těšický, Petr ; Urbánek, Michal (referee) ; Kašpárek, Jaroslav (advisor)
This bachelor thesis deals with the conceptual design of a remotely controlled tracked vehicle for work on a slope. In the first part, a short research analysis of remotely controlled tracked vehicles is performed. During the design of the concept itself, dimensional, force and power calculations are performed. The design of some components is based on these calculations. Strength calculations for certain components are performed in the last part of this work. The result is a conceptual design of a remotely controlled tracked vehicle.
|
|
|
Regulation options of renewable energy sources
Pavlíček, Jiří ; Morávek, Jan (referee) ; Pěcha, Jiří (advisor)
This bachelor's thesis deals with the regulation of renewable energy sources. It focuses on ways of managing and possibilities of regulation renewable energy resources. Indicates the proportion of various types of renewable energy sources in electricity production and their representation in the electrical load profile. Thesis describes the various storage systems, which can be used to stabilize the renewable energy sources. Evaluate the applicability of these storage systems in the energy sector.
|
|
|
Distributed Generation and its Influence on Power Quality
Bernáth, František ; Santarius, Pavel (referee) ; Braciník,, Peter (referee) ; Mastný, Petr (advisor)
This work deals with the deployment of distributed power sources into the electric power grid. The nature of these sources causes that the massive integration may experience problems with power quality in the local context, and also overall reliability of supply in the range of interconnected power systems may be endangered. Work is focused on local voltage quality problems with special emphasis on analysis and design of tools (e.g. reactive power compensation units of power plants or dynamic voltage control by transformers 110/22kV) for voltage control in power distribution systems. These tools should be used as a part of uniform concept of voltage control. The proposed concept is involved.
|
|
|
Strain, stress and strength analysis of the truss construction.
Hladký, Maroš ; Horníková, Jana (referee) ; Vrbka, Jan (advisor)
The thesis is focused on strain, strength, and strain analysis of planar truss construction. The purpose of this work is to determine the load on each rod, and to assess the safety against limit states. After determining the primary characteristics, the structure will be modified and load and safety re-calculated. Depending on the outcome, the design will be changed again. Next, will be destined gravity affect on the design and impact of production inaccuracy. Deformation of structure will be calculated.
|
guest ::
