National Repository of Grey Literature 17 records found  1 - 10next  jump to record: Search took 0.01 seconds. 
DUE Seifert's residence
Smolka, Ondřej ; Utíkalová, Ivana (referee) ; Dohnal, Jakub (advisor)
The subject of the bachelor thesis is the project documentation for the construction of a residential building located in the city district of Brno - Lesná at the intersection of Nejedlého and Seifertova streets. It is a building for housing with one underground floor and eight above-ground floors with the last floor stepped to create a terrace. The basement is used as a collective garage including technical rooms primarily for the ventilation of the garage. On the first floor there are technical facilities and a second bulk garage. In the remaining seven floors there are residential units of sizes 1 bedroom and 3 bedroom. The building has two reinforced concrete monolithic cores, where each of them has a staircase and two lifts. The structural system of the building is designed as a reinforced concrete monolithic skeleton with load-bearing columns and ceiling slabs without penetrations. The building is based on 900 mm diameter piles, a watertight reinforced concrete white bath and a foundation slab. Primarily acoustic brick blocks are used for the infill non-loadbearing masonry perimeter and interior walls. The roofs of the building are designed to be flat, the main roof over the top floor is with a PVC sheeting and the roof over the first floor of the stepped storey is with a ductile sheeting. The content and design of the proposed work also provides for a planned dilated adjacent residential building that shares a basement with the main building, has four floors above ground and is situated perpendicular to the residential building under consideration.
Apartment building
Parák, Štěpán ; Kacálek, Petr (referee) ; Sedláková, Markéta (advisor)
The subject of the bachelor’s thesis is project documentation of new appartment building in Pohořelice on street U kasáren. The proposed object is in the existing housing development of the city. It is a basement four-story apartment building with balconies and a flat roof. In the basement there is a cellar cubicle, 2 technical rooms, a bicycle shed, a carriage shed and a cleaning room. On the first above-ground floor, there is an apartment unit for people with limited mobility, as well as a barbershop, a dental office, and a switchboard room. There are 2 3+kk apartment units and one 1+kk apartment unit on the regular floor of the apartment building. The wall support system in the above-ground part is made of ceramic blocks, which is insulated with the ETICS system. The perimeter walls of the underground floor are made of lost formwork, and the internal load-bearing walls are made of ceramic blocks. The building will be based on monolithic concrete belts and a reinforced concrete slab. The ceiling structures are semi-assembled from ceramic concrete beams and ceramic inserts in combination with monolithic concrete additions and balcony slabs.
Apartment house in Pacov
Tománek, Ladislav ; Průša, David (referee) ; Brzoň, Roman (advisor)
The aim of the bachelor´s thesis is to elaborate the documentation for the construction of the apartment house and terraced garages. The location of the designed building is in Sídliště Míru street, in the town of Pacov. The apartment house has three above-ground floors and one underground floor. Fourteen housing units are designed in the above-ground floors, while the underground floor consists of a technical background of the house and a cellar units. On the plot area, there are also designed open-air parking spaces and a children's playground. The apartment house is based on on strip foundations. The structural system of a building is designed from walls with monolithic reinforced concrete ceilings. The load-bearing walls of the above-ground floors are designed from HELUZ ceramic blocks and the load-bearing walls of the underground floor are solved by permanent formwork. The building is isolated with an external contact insulation system, internationally referred to as ETICS. The roof is designed as warm flat roof. Terraced garages are designed as two separate buildings, each with seven garage spaces. Load-bearing and partition walls will be made of HELUZ ceramic blocks. The foundation will be based on foundation strips and roofing with warm flat roof.
Multifunkcional building in Frýdek-Místek
Suchý, Petr ; Dvořáková, Jana (referee) ; Čupr, Karel (advisor)
The subject of this thesis is the preparation of project documentation multifunctional building. It is a five-storey building with a basement. The roof structure is designed as a single-layer, flat roof. The building is divided into three working parts. Prví part is used for housing. It consists of 18 housing units, one of which is designed for wheelchair use. The second part of the building is intended for the public. This area retail sales. Includes store books, toys shop, newsagent and a hairdressing salon. The last part of it is public garage. It is intended for users of residential units.
Sport & relax centre
Sobotka, Martin ; Klubal, Tomáš (referee) ; Ostrý, Milan (advisor)
Object SPORT & RELAX CENTER is a new building made by reinforced concrete monolithical skeleton. Filling masonry is creating with porous concrete blocks YTONG. Thermal insulation is attended by blocks made from mineral wool. Facade is ventilated and made from fibre cemented blocks. Object has two floors and cellar. The foundations are reinforced concreting monolithical stretches and foots. The stairs are three-arm monolithical reinforced concrete. Object is roofed by flat one-housing roof, over restaurant part is intensive green roof and terrace with ceramic tile.Object is supposed to use for sports and relaxation needs for the public of Chotěbor’s city and vicinity. In first floor we can find two courts for squash, restaurant with the terrace, in second floor is fitness center and in 1S we can find wellness center (massages, relaxing baths, whirlpool, relaxing room, 3 kinds of sauna-finland, steam and steam solt sauna). On the east and the south part of the parcel will be providing parking lot for visitors and employees. On the west part of the parcel is enter for supply. On the north are situated 2 courts and a volleyball pitch. The rest of the parcel cover light grass.
Multifunctional building
Farkas, Zoltán ; Sláma, Ludvík (referee) ; Mohelníková, Jitka (advisor)
Theme of this master´s thesis is the project documentation of a multifunctional building. It is a four-storey basement building covered with flat roofs. The object consists of two parts. One part is residential, consisting of 17 flats, one of which is designed as a flat with disability facilities. The other part is designated for public and includes a cafe with a rear. To the residential part belongs an underground collective garage, one parking lot for each flat.
Restaurant with Microbrewery in Golčův Jeníkov
Wernerová, Lucie ; Soudek, Pavel (referee) ; Kalousek, Lubor (advisor)
The project involves the design and solution of restaurant with microbrewery and accommodations. This is a new building on the land plot no. 2739, which is located in Golčův Jeníkov and situated in the middle of plat. Entrance to object and disposition inside the building is has barrier-free solution. Restaurant with microbrewery is designed for a capacity of 120 people in restaurant and 30 places to sit in lounge bar. Total capacity of boarding house is 21 beds. One double room is designed has barrier-free solution. Structural system of restaurant with microbrewery is combined, which is formed in one part of precast concrete frame S 1.2 and in other part of wall structural system. They are designed reinforced concrete columns about dimensions 0,4x0,4 m with axial distance 6x8 m. Masonry part of the building and infill wall in above-ground floors is lined with ceramic blocks of the type therm. Infill wall in the basement is formed of permanent formwork. The building is insulated a contact thermal insulation with an insulation of thickness 130 mm. Internal loadbearing and non-load-bearing wall in basement and in first floor are lined with ceramic blocks type therm and in second floor they are designed plasterboard partitions. The building is covered with a warm flat roof. Loadbearing structure of roof and ceilings structure are formed prestressed concrete floor slabs SPIROLL. Floor assembly is burdened with river stones of thickness 120 mm.
Guest house and restaurant, Pasohlávky
Melounová, Martina ; Peterka, Tomáš (referee) ; Müller, Jan (advisor)
The theme of diploma thesis is project of guesthouse and restaurant. These are two new buildings on the flattened land plot no.5767, which is located in Pasohlávky. The guesthouse has two floors and a partial basement. Capacity of the guesthouse is 26 beds, one double room is designed as accessible room. In the basement of the guesthouse there is a wellness area and technical facilities of the building. The restaurant is designed as single-storey building with a capacity 50 seats and kitchen with a capacity 250 meals per shift. The main material of vertical load-bearing structure are sand-lime bricks with a certifies contact insulation system. The roof of the guesthouse is saddle roof, the roof of the restaurant is green roof.
Winery and guesthouse
Gelatková, Barbora ; Pospíšil, Tomáš (referee) ; Pěnčík, Jan (advisor)
Subject of this master thesis deals with project of viticulture building with guesthouse. Part of the guesthouse is also a restaurant and kitchen. The volume of wine production places this vinery into medium size category, affiliated guesthouse provides 20 places to accomodate guest and restaurant offers 50 places to seat. The building is situated in periphery of village Zaječí. The basement building has two storey. In cellar there is wine production equipment and technical background. First floor contains restaurant, kitchen and affiliated service, staff background and one accomodation unit designed for disabled people. Second floor offers 6 accomodation units and roomy terrace designated for guests. Part of every accomodation unit is separate bathroom. Perimeter bearing basement walls is made from lost formwork, perimeter walls of aboveground part is made from clay block. Cladding is insulated with contact system. Horizontal construction consist of reinforced concrete prestressed beams. Gabled roof is made from wooden truss girders covered by clay tiles.
Apartment building
Šafr, Matěj ; Vaněk, Vojtěch (referee) ; Utíkalová, Ivana (advisor)
This bachelor thesis focuses on the development of project documentation for the construction of an apartment building. It is a building with 10 storeys and a full basement. The above-ground floors are mainly residential units and partly studios. This multi-storey building is also equipped with an elevator and an underground parking space, which is accessible by a car lift. The ground floor also houses a bicycle shop. The residential building will be located on the cadastral territory of the municipal district of Černá pole [610771], the entire building is located on plot number 3794 in Brno. Vertical load-bearing structures are designed mainly as reinforced concrete, then ceramic masonry in the higher receding floors. Horizontal load-bearing structures are designed as monolithic reinforced concrete. The roofs of the building are designed as flat single-skin roofs with an extensive vegetation layer, terraces are constructed with ceramic tiles. The foundation is designed on piles with a diameter of 600 mm and a waterproof monolithic reinforced concrete slab.

National Repository of Grey Literature : 17 records found   1 - 10next  jump to record:
Interested in being notified about new results for this query?
Subscribe to the RSS feed.