|
|
Measurement design in modern packet, transport, and access technologies
Galovič, Dominik ; Michálek, Jakub (referee) ; Škorpil, Vladislav (advisor)
The diploma thesis focuses on the capabilities of the VeEx VePAL Tx300s analyzer and network analysis. In the theoretical part, the thesis focuses on the most common tests used for analyzing network parameters of networks and its devices. Their principles, advantages, and disadvantages are described. The choice of the tests is deliberately selected to match the capabilities of the analyzer itself. Its basic functions are described in this diploma thesis. After understanding the functioning of individual tests and the analyzer itself, two laboratory tasks were created to familiarize potential students, for whom these tasks were designed, with the basic operation of the analyzer and to acquaint them with basic as well as advanced testing of network parameters, whether of active network elements or the laboratory network itself. An addition is the use of the VeEx VePAL tx300 analyzer, which was purchased previously, and the change of an already made laboratory task.
|
|
|
Digitally controlled filter
Rez, Jan ; Szabó, Zoltán (referee) ; Friedl, Martin (advisor)
This bachelor's thesis deals with design of a functional prototype universal digitally controlled analog frequency filter 2th order. Part of the design is the selection of appropriate filter topology diagram and selection of an integrated circuit. Universal filter will contain lowpass, highpass, bandpass and notch filter. The filter is tuned in cutoff frequency from 100 Hz to 15 kHz. The bachelor's thesis focuses on the circuit analysis of selected concrete structure of universal filter and possibilities of digital control filters. The practical part of this thesis includes PCB design, control software for filter and graphical representation of measured results.
|
|
|
Packet Analyser for UWB based on 15.4a standard
Leixner, Martin ; Šimek, Milan (referee) ; Mráz, Ľubomír (advisor)
The aim of this work is study the standard for wireless sensor networks IEEE 802.15.4a. Design and implementation of a packet analyzer for ultra wideband technology com- pliant with IEEE 802.15.4a standard. Integrate packet analyzer to inspection software Wireshark and implement dissector for view packets. Finally, analyze and evaluate the parameters of the proposed packet analyzer.
|
|
|
Analysis and Implementation of Virus Pattern Rules
Janeček, Jiří ; Schäfer, Jiří (referee) ; Janoušek, Vladimír (advisor)
This bachelor's thesis deals with analysis and implementation of rules for program, which routes virus samples for their later processing. The expert system is integrated in this program. It was created by using tool called CLIPS. This thesis also describes environment, where program is situated, and importance of component like this in system for virus sample processing. Analyzer has been implemented in C/C++ language.
|
|
|
Control and Diagnostic System for I2C Bus
Juhás, Miloš ; Šebesta, Jiří (referee) ; Urbanec, Tomáš (advisor)
The objective of this diploma thesis is design and realization of I2C bus analyzer. I2C bus protocol is briefly described, together with means of connecting devices to the bus. Next the basic requirements for I2C bus analyzer are defined. Then the design of hardware I2C-to-USB converter including block description is proposed. The chapter dedicated to converter firmware describes method of communication with PC, decoding of intercepted commands and principles of master, slave and passive mode of bus monitoring. The last part is focused on operation software and its structure. Described are individual interfaces, most notable classes and default plugin modules.
|
|
|
Breath Alcohol Tester
Pagáč, Patrik ; Kolář, Radim (referee) ; Chmelař, Milan (advisor)
The theme of bachlor’s project is design of simply breath alkohol tester. A breath alcohol test determines how much alcohol is in your blood by measuring the amount of alcohol in the air you breathe out (exhale).My task is interpret the possibility of measuring the alcohol content in the body. Describe the different methods and compare their accuracy and useability for practical measurements and also used in law enforcement.
|
|
|
Design of 10-channel audio equalizer with optimization of frequency characteristic and spectral audio analyzer
Štěrba, Václav ; Dvořák, Radek (referee) ; Šotner, Roman (advisor)
This work deals with the design of a 10-zones equalizer with optimized frequency characteristics with a spectrum audio analyzer. In this work the problem of processing audio signals using equalization for filtering the interference frequencies, correction of frequency cover signal boost or suppression of the required zones of the audible spectrum are also analyzed. The influence of subjective perception of sound intensity of the audio signals reproduction and its use in working with equalizer is discussed too. The work describes the principles and usage of the audio-analyzer as a tool for the optimization of the audio equalization setting when ensuring the appropriate listening conditions of music reproduction, spoken word, sounds, etc. It also focuses on the signal source for testing audio-chains, their generation and measurement using the audio analyzer. The equalizer equipment, audio-analyzer generator of reference signals equipment and power supply are designed as a single unit.
|
|
|
Packet analyser for a Wireless Sensor Networks based on the standard IEEE 802.15.4
Bednařík, Martin ; Šimek, Milan (referee) ; Mráz, Ľubomír (advisor)
The objective of this thesis is to get familiar with wireless sensor networks technologies and with standard IEEE 802.15.4. and communication principle in wireless sensor networks built on this standard. Main goal of this project is to design a packet analyzer, which is capable to catch data on chosen channel and this data is able to analyze. Part of this project is production of necessary microcontroller software equipment. Another output of this project is do a research of available packet analyzers on market and compare them with analyzer build by this thesis.
|
|
|
Analysis of LAN Network followed by Simulation in Opnet Modeler Environment
Skopal, Jakub ; Růčka, Lukáš (referee) ; Hošek, Jiří (advisor)
This thesis deals with the exploration of possibilities of LAN analysis with the use of the hardware analyzer Finisar TGHs from the Finisar Corporation Company. As a monitored network was choosed the local computer network in the laboratory PA-249 at the Department of Telecommunications, which is located at the Faculty of Electrical Engineering and Communication, Brno University of Technology. All results acquired from the complex long-term monitoring of the choosed LAN network are described in this thesis. Further, the thesis is focused on the simulation and analysis of the model of this network that was created in the simulation environment Opnet Modeler. The data obtained from the real LAN monitoring were used as a basis of an operating simulation of the transmission abilities and features of the real LAN network. The last part of the thesis describes the verification of the transmission capabilities and characteristics of the real LAN. Verification was performed in Opnet Modeler, where the network has been analyzed in detail.
|
|
|
Packet Analyser for Wireless Sensor Networks with Ethernet Interface
Leixner, Martin ; Šimek, Milan (referee) ; Mráz, Ľubomír (advisor)
The aim of this work is study the standard IEEE 802.15.4. Implement a packet analyzer for the frequency band 2.4GHz and sub-gigahertz band. The analyzer will provide accu- rate time stamp to the received packets. It will operate remotely and controlled by a web page. Implemented analyzer will work with the inspection software Wireshark. Finally, evaluate the parameters of the proposed packet analyzer.
|
guest ::
