|
|
The Role and the Responsibility of the Architect in the Current and Future Sustainable Design of Buildings
Marek, Aleš
This paper deals with the role and responsibility of the architect in the sustainable design of buildings in their lifelong cycle: in construction, operation, modernisation, and removal. The aim is to analyse and define requirements for the architect’s activities in the design stages. The paper discusses the demands and methods of integrated design, digitisation and robotics in the construction industry, and the use of BIM. The starting point is design practice and international requirements for the complex evaluation of buildings.
|
|
|
Valuation Using Building Information Model
Průcha, Aleš ; Venkrbec, Václav (referee) ; Kliment, Daniel (advisor)
The aim of this diploma thesis is to appraise the construction using the BIM model with cost approach. The work deals with the introduction of BIM, a description of history, implementation and the need for BIM in construction. Furthermore, the work contains a description of valuation methods with a special focus on the cost approach. A 3D model of a family house was created for the purposes of the diploma thesis. The subject property was valued by several cost approach methods - appraisal using technical and economic indicators, item budget, cost approach in BIM. The thesis contains a description of the procedure for valuation using BIM and assessment of prices of all appraise methods.
|
|
|
3D modeling of a part of the building of SPŠ stavební Brno
Penk, David ; Jursík, Petr (referee) ; Kuruc, Michal (advisor)
The thesis deals with the creation of a 3D model from data collected by laser scanning. The first part deals with the theoretical foundations of buildings information modeling and method of laser scanning. The rest of the work describes the detailed process from data collection to the creation of the model. Most of the space is devoted to work in the Revit software environment.
|
|
|
Redesign of Construction Documentation into BIM Model
Pejchal, Mojmír ; Habrovec, Jiří (referee) ; Bureš, Jiří (advisor)
The motive of the diploma thesis is the redesign of the original project documentation of an block of flats into an information model for administration and maintenance. The first part deals with modeling the building according to the drawing part of the documentation in the Autodesk Revit. The second is about the outputs of the information model and its use in building management. It also includes an evaluation of the effectiveness of redesign in relation to the detail of the model and its link to the original drawing documentation.
|
|
|
BIM and building cost estimation
Pavka, Filip ; Výskala, Miloslav (referee) ; Biolek, Vojtěch (advisor)
The main topic of the bachelor thesis is analyses of possible approaches to the cost estimation of construction and buildings parts in software that supports building information modelling, particularly software Revit. In the introductory, it describes a general definition of BIM and the whole problematics in general. Therefore, in the particular parts, the thesis is focused on the advantages and disadvantages of BIM together with the level of implementation in the Czech Republic as well as in foreign countries. Furthermore, it relates to construction stakeholders and their relationship with BIM. Through next chapters, there are introduced current methods of cost estimation and quantity takeoff. The practical section deals with the methods of modelling construction parts and their accuracy. Plus that, there is a description of how to get values for window sill and jamb to the quantity takeoff, even though it is not an implemented function in software. As the main result of this work is to find more effective ways and simplify the process of budgeting.
|
|
|
Evaluation of defects and disturbances of an existing structures
Uher, Adam ; Láník, Jaromír (referee) ; Schmid, Pavel (advisor)
The bachelor thesis describes the most used methods of diagnostics of building structures, then it focuses on the use in diagnostics of as yet unused modern technologies, potentially replacing several activities in the work of diagnostics and other professions. The advantages of these technologies, specifically 3D scanning, are presented on a case study of the revitalization of an apartment building in Brno, Koliště 33. In the practical part of thesis is described the process of diagnosis of defects and failures of the object, including applied methods and findings. The output of the work is a proposal of measures and a set of recommendations.
|
|
|
Boarding House Amerika
Pokorný, Patrik ; Pilný, Ondřej (referee) ; Kalousek, Lubor (advisor)
This diploma thesis elaborates project documentation for the construction of building. The building is situated in outskirts of the town Velké Meziříčí. The boarding house for fooding and lodging with separated private zone and restaurant. Both parts connect entrance hall with reception and communication spaces. The lodging section is divided into three stories. Ground floor restaurant and salon with terrace on the second floor have south-facing oriented glazed curtain wall. That is the main part of building with stunning views on the ambient nature.
|
|
|
Kindergarten and primary school in Škrdlovice
Peňáz, Zdeněk ; Vystrčil, Jan (referee) ; Šuhajda, Karel (advisor)
The aim of this master project is to design a nzeb kindergarten and primary school in Škrdlovice. The building has three parts: kindergarten and primary school with 2 above–ground floors and basements are connected with a single canteen. The canteen has a flat extensive green roof, while the kindergarten and primary school have saddle roof. The kindergarten has two identical floors with playrooms, locker rooms, bed and toy storage, teacher’s office, and bathrooms. First floor of the primary school contains locker room, teacher’s’ offices, it classroom, afterschool centre, and toilets. Three classrooms, headmaster’s office, and toilets are in the second floor. The building is designed using Xella building system. The external load–bearing walls, slabs, and internal non–bearing walls are made of aerated concrete blocks. The internal load–bearing are made of lime–sand blocks. The building is insulated with non–fibrous mineral panels. The project includes design of lightning, HVAC, DHW, and photovoltaics systems. The project also includes a study of three structural details including 3D models in BIM software and their thermal assessment. The project was designed using BIM software Revit.
|
|
|
Analysis of BIM model implementation and cost estimation in construction company
Forman, Vladislav ; Tuscher, Martin (referee) ; Biolek, Vojtěch (advisor)
The diploma thesis is focused on the analysis of the implementation and valuation of the BIM model in a construction company. In the practical part, a specific construction company and its project is selected for the implementation and valuation using valuation plugins, which define the elements according to the design classification. For the purposes of this work, the constructions of the main building production are selected - piles, prefabricated load-bearing skeleton, wall perimeter cladding and roof folded cladding. Based on the model developed in this way, the BIM model is compiled and by exporting data from valuation plugins, an item budget is processed. The main result of this work is to perform an implementation analysis and show the advantages and disadvantages of the BIM approach to projects.
|
|
| |
guest ::
