|
|
Contactless temperature measurement
Závodný, Ondřej ; Bejček, Ludvík (referee) ; Beneš, Petr (advisor)
In this bachelor thesis I outlined the problems of non-contact measurement and practical verification of the basic parameters thermo camera Fluke Ti20. It is especially on the experimental measurement of the source of the reference temperature and the product to demonstrate the impact of emissivity. The aim of this work is a practical verification thermo cameras parameters, the determination of uncertainties and to explore the effects of parasitic repeated measurements. The basic part is a brief recorded history, the general relations and principles of the non-contact measurement, as well as their own use and typical parameters. In the next chapter you more acquainted with itself thermo camera, properties and basic parameters. The practical part is about the measurement itself. The main objective then was to verify the accuracy of reported thermo camera and examining the impact of emissivity.
|
|
|
IR thermometer with automatic emissivity correction
Dobesch, Aleš ; Tannenberg, Milan (referee) ; Poliak, Juraj (advisor)
Diploma thesis deals with basic physical quantities and laws relating to non-contact temperature measurement and emissivity determination of solids. It describes the design and implementation of the IR (Infra-Red) thermometer often missed with automatic emissivity correction. The first chapter explains the concept of temperature and basic principles of temperature measuring . The second chapter focuses on the history and theory of non-contact temperature measurement. Gradually are explained the concepts related to non-contact temperature measurement and the problem of determining the emissivity of the body. Next third chapter describes the proposed hardware solution of IR thermometer. The fourth chapter describes a software written for the IR thermometer. The fifth and last chapter summarizes the findings and knowledge from the implementation of non-contact thermometer and measuring emissivity.
|
|
|
Utilization of thermal systems at power electrical engineering
Strnad, Karel ; Janda, Marcel (referee) ; Kuchyňková, Hana (advisor)
The main theme of the master's thesis is using of thermal camera to measure temperatures in electrical engineering. First are mentioned the physical principles of heat transfer. Then the thesis deals with methods of determining the correct emissivity of the measured object and in the next point with sensors designed for sensing infrared radiation, there is also part dedicated to evaluation software Report Sat Standard, which was used to evaluate the pictures taken with thermal camera SAT-HY 6800. Next part of this work is the measurement of the DC and EC motor with help of thermocamera, which took place in the electric company ATAS Nachod. Attachment to this master's thesis there is animation of EC motor created in Autodesk Inventor.
|
|
|
Measurement of thermal field in electric machines
Dostálek, Martin ; Vítek, Ondřej (referee) ; Janda, Marcel (advisor)
Diagnosis temperature is one of the most important disciplines. We meet it in everyday life, but it is very important for all sectors of industry. This is a measurement providing an immediate state of the measured object. Contact measurement of different temperature sensors and contactless measurement using thermal imagers. The important part is the measurement of temperature rise of induction motor. Part of the work deals with losses in the electric motor. These losses are converted into heat, which affects from various parts of the machine. Correct identification of the temperature field is important in helping to design the cooling system of the instrument. Virtually the data obtained are compared with theoretical data. We will capture part of the device and realize thermal simulations in a suitable simulation program. We propose modifying the cooling machine and the resulting data from the simulation compares.
|
|
|
ThermaCAM PM595 in practical use
Švábeník, Petr ; Křivák, Petr (referee) ; Hudcová, Lucie (advisor)
The thesis presents study of generation of thermal (infrared) radiation, its properties and ways of measuring. The possible used sensors of this thermal radiation are described. A thermacam is using these sensing units so there are written benefits of this measurement. Some suggestions for practical use and specific submissions to measure are written.
|
|
|
Utilization of infrared camera for temperature measurement of electrical machines
Líbal, Jan ; Aubrecht, Vladimír (referee) ; Kuchyňková, Hana (advisor)
The master‘s thesis deals with utilization of infrared camera for temperature measurement of electrical machines. The first part describes non-contact temperature measuring, the second part describes principle of sensors that evaluate quantity of incident infrared radiation. In the next part there is termovision camera SAT-HY 6800 presented and the instructional manual for SAT Report computer programme created. This computer programme is used for analyzing of termovision pictures from the SAT-HY 6800 termovison camera. The chapter 7 describes temperature measuring of one-phase asynchronous motor type J22TO484. The chapter 8 describes temperature measuring of semiconductor components of EC motor G6 series. Both of these motors are produced by ATAS elektromotory Náchod a.s. The last part of the thesis describes creation of animation of one-phase asynchronous motor type J22TO455. The animation was created in 3ds Max computer programme.
|
|
|
Thermal measurement
Zachar, Martin ; Lisý, Martin (referee) ; Kracík, Petr (advisor)
This thesis deals with theory of thermal measurement with both physical as well as technical side. Thesis describes basic methodics of thermal measurment and further compares few different thermographic cameras at the current market. Main part of the thesis is focusing on a script, that has been created in program Matlab, serving for analysis of a series of thermographic pictures capturing verticaly placed pipes, following by registration of founded temperatures to Excel and drawing of diagrams of the change of average temperature along pipe and histograms of temperatures of given pictures.
|
|
| |
|
|
Temperature Measurement in Technical Diagnostics
Szmek, Tomáš ; Janečka, Jan (referee) ; Vdoleček, František (advisor)
The purpose of this bachelor’s thesis is to familiarize a reader with possibilities of temperature measurement along with constructions and functions of particular measuring instruments and to present their positive and negative aspects. Both basic contact thermometers used in common life and complex systems (thermovision) employed in the most demanding industrial application are described here. The thesis depicts temperature as a diagnostic value according to which the causes of machinery failures are easily detected and subsequent accidents prevented.
|
|
|
Study of reflectance of materials for construction surface treatment
Rauchfussová, Karolína ; Šot, František (referee) ; Šťastník, Stanislav (advisor)
Presented work deals with the study of properties of the progressive heat-reflecting foil thermal insulating materials. The work describes the transport mechanism of thermal energy through the structure of heat-reflecting materials, physical properties are compared with conventional thermal insulating materials. It is also shown here the main applications of these materials are in the field of low-energy and passive houses, especially in terms of the optimal method of incorporating in the building. The practical part is devoted to measuring of reflectance was made and then the measuring device HOT BOX was assembled.
|
guest ::
