|
|
Apartment building
Kuňák, Radim ; Kozubíková, Ivana (referee) ; Matějka, Libor (advisor)
The aim of this bachelor thesis is to prepare the design documentation of a new residential building that will meet the requirements and conditions for a building with almost zero energy consumption. This apartment building has been designed in such a way that its operation does not interfere with or restrict the operation of adjacent apartment buildings on adjacent land in the vicinity. The new apartment building is situated in the town of Zlin, in the cadastral and urban part of Priluky u Zlina. Among the advantages belonging to this plot is its flatness, which will facilitate the process of construction of the apartment building or other adjacent buildings. On the land used by us, a parking lot will be designed with 24 parking spaces, one of which is intended for people with mobility disabilities and the other for families with children, these parking spaces are located closest to the entrance to the BD on the west side. The residential building is designed as a four-storey, partially basemented building. In the apartment building are sized storage spaces, technical facilities of relevant technologies, common areas serving as a place of recreation for the residents of the BD and separate residential units. The total number of residential units is 15. They are divided into 3 layout categories - 1+kk, 2+kk, 3+kk. Residential units on the 1st floor have recreational space terraces. Residential units in 2.NP and 3.NP have balconies or loggias designed for recreation. The largest apartment in the 4th floor has a spacious terrace on the vegetated roof designed for this purpose. If necessary, the layout of apartments and common areas can be changed to meet the requirements of barrier-free use of the building by people with disabilities. The bachelor thesis has been prepared in accordance with the current legislation of the Czech Republic as of the date of submission of this bachelor thesis.
|
|
|
Apartment building
Klučková, Jana ; Kozubíková, Ivana (referee) ; Matějka, Libor (advisor)
The subject of this bachelor's thesis is the development of project documentation for an apartment building with almost zero energy consumption. The object of the apartment building is a building consisting of four above-ground floors and one above-ground floor. In the basement of the building, its technical equipment is located, which is located together with common storage areas and storage areas for individual housing units. There are 10 apartment units on the upper floor, and there are also office spaces on the 3rd floor. The building has a designed wall construction system, it has a full basement, which is based on foundation strips, and its roofing is solved by a flat vegetated roof.
|
|
|
Kindergarten "U Mlékárny"
Pielesz, Dariusz ; Vystrčil, Jan (referee) ; Šuhajda, Karel (advisor)
The subject of the master’s thesis is to design a kindergarten, namely the preparation of design documentation for the building permission, then the design of the building services and the thermal assessment of selected structural details. The kindergarten is located on a flat brownfield of a former dairy near the centre of Český Těšín. The building's surrounding area consists of apartment houses, a sports hall and a gardening colony. The kindergarten is designed for a total of 36 children in two classes. There are also dedicated spaces for physical activities, workshops, and an activity classroom. The building has 2 air handling units providing mechanical ventilation. Some of the rooms are cooled by air-conditioned. The heat source is heating water from the hot water district heating system, which is transferred by a pressure-independent heat exchanger unit. Sun breaker are installed on the south façade, other windows have external blinds. The building uses rainwater for flushing. The eastern part is two-storey with a flat roof with photovoltaic power plant, the western part is one-storey with a flat extensive green roof. The structural system is designed as a masonry wall system made of aerated concrete blocks, the floor structure is made of pre-stressed concrete panels. The staircase is made of aerated concrete. There is also a lift. The building is designed as wheelchair accessible. The thesis included 2D and 3D designs of three structural details. Subsequently, they were thermally assessed for thermal bridge (linear thermal transmittance and temperature coefficient) using Deksoft software.
|
|
|
Local council
Orolín, Štefan ; Utíkal, Aleš (referee) ; Utíkalová, Ivana (advisor)
The topic of the diploma’s thesis is the creation of part of the project documentation for the construction of a nearly zero energy municipal office. The area under consideration is located in the central part of the village of Kvasiny. This is a built-up, stabilized area, which is intended for civic amenities. From an urban point of view, it is an open structure formed by a freely accessible public space between individual objects. The building is designed on a simple rectangular floor plan, has two above-ground floors and is partially underground. In terms of volume, it is three interpenetrating blocks. The facade is characterized by wooden slats, which separate the mass of part of the cultural centre from the mass of the municipal office. The building is designed as a brick building with a flat roof. The structural system of the building is a combination of transverse and longitudinal wall systems. The ceiling and roof structures are designed from reinforced concrete prefabricated prestressed panels of the Spiroll type.
|
|
|
Energy efficient building with a dental office
Vostal, Matěj ; Rubinová, Olga (referee) ; Blasinski, Petr (advisor)
The aim of my master’s project is to design a nearly zero-energy dental clinic. The whole thesis is divided into three parts. The first part aims to architectural and structural design of the building. The building is single storey. The exterior load-bearing walls are designed from ceramic blocks with thermal insulation, the roof is designed from cast-in-placed concrete roof slab and an extensive green roof. The foundations of the building are made of concrete strips. The dental clinic consists of six dental offices for dentists, two other offices, a waiting room for patients, a staff facility room, a utility rooms and public toilets. The second part aims to design the technical equipment of the building such as interior lighting with sunlight shading, rainwater usage for watering greenery and toilet flushing, photovoltaic panels, a heating pump for heating and cooling and air-condition system with heat recovery. The third part focuses on air-condition filters. I measure pressure losses and extraction efficiency.
|
|
|
Sports centers
Šefferová, Diana ; Skřek, Daniel (referee) ; Beneš, Petr (advisor)
The aim of the diploa thesis is to prepare documentation for the construction of the assigned building of the Sports Center, which is located on plot no. 845/10 in the city of Brno, in the cadastral area of Bro-Ponava. The building is partially basemented, it has three floors above ground and in terms of building physics is designed as a building with almost zero energy consumption. In the basement, there is a garage for visitors and staff of the sports center. On the upper floors there are designed exercise rooms, technical and hygienic facilities for visitors and employees, an office, a meeting room and on the third floor there is a small wellness center. The vertical structures of the building are designed from a monolithic reinforced concrete skeleton with a filling of ceramic fittings and the basement is made of monolithic waterproof walls. Horizontal structures are made of cast-in-place reinforced slabs. The foundations are designed as a cast-in-place foundation slab serves waterproofing basement. The roof of the building is designed as a flat walkable roof in combination with warm flat green roof. The building is insulated with contact thermal insulation system.
|
|
|
Civic amenities building
Číž, Martin ; Svoboda, David (referee) ; Berková, Petra (advisor)
The main goal of this thesis is elaboration of a project documentation for the building permission of nearly zero-energy office building. The thesis is divided into three parts A. Architectural-Structural, B. Building services and C. Simulations. The building is located in the Brno city centre in the street Kounicova. The building has a rectangular floor plan with bevelled edges on the north side. The building has three above-ground floors and an underground garage in the basement. There is a café, a reception, technical and storage facilities on the first floor. The second and third floor contain offices, meeting rooms and staff facilities. All floors are wheelchair accessible. The building has a cast-in-place reinforced concrete frame and walkable flat roof. The infill walls are made of sand-lime blocks and partitions walls are made of gypsum fibreboard. The heat source is a transfer station from a hot water local area network, cold source is an air cooled chiller. There are two air conditioning unit with heat exchanger installed in the building. Rainwater is used for irrigation. There are monocrystalline PV panels on the roof. The third part of this thesis is the spatial acoustics of the open-space office on the third floor.
|
|
|
Multipurpose Educational Centre
Drahokoupilová, Barbora ; Vystrčil, Jan (referee) ; Košíčková, Ivana (advisor)
The objective of my diploma thesis is to design multipurpose educational centre. The project consists of three parts. The aim of the first one is to create the architectural and structural design. The building is mainly centred around four common rooms accompanied by a simple kitchen and basic amenities. It is a two-storey building with a green roof. Its floor area is 327 m2. The vertical load-bearing structures are masonry, specifically made of aerated concrete blocks. The horizontal load-bearing structures are designed as cast-in-place reinforced concrete slabs. Envelope walls are insulated with mineral wool because of its elliptical floor plan. The foundation is cast-in-situ concrete slab. The second part focuses on a building services design. Domestic hot water and heating is provided by a gas boiler and electricity is partly supplied by a photovoltaic system. The building has mechanical ventilation with heat recovery. There is an underground tank for collecting rainwater that is used for watering the garden. The third part relates to facility management. It focuses on facility operations and core and non-core activities.
|
|
|
Energy retrofitting of a family home to the nearly zero energy building
Uhlíř, David ; Fišer, Jan (referee) ; Charvát, Pavel (advisor)
The diploma thesis is devoted to reducing the energy intensity of a two-storey family house from the 1960s, to a building with almost zero energy consumption. First, the family house is analyzed in terms of the condition before reconstruction. The result of this analysis is a certificate of energy performance of the building in its original condition. Within the individual chapters, I subsequently propose specific energy saving measures. At the end of each chapter, these measures are economically evaluated using the New Green Savings Grant Program. The first measure is dedicated to improving the thermal technical properties of the building envelope. This is ensured by the complex insulation of the family house and the replacement of the original windows and doors. The second measure is devoted to the design of a suitable method of forced ventilation with heat recovery. As part of the third measure, I assess and select a suitable heat source that will replace the original heat source of the family house. As a final measure, I propose the use of a renewable energy source in the form of a photovoltaic system, which is based on energy simulation in the program DEKSOFT FVE. At the end of my work, I am developing a building energy performance certificate, which assesses the fulfillment of the condition of a building with almost zero energy consumption.
|
|
|
Apartment house Proluka in Olomouc
Přidal, Petr ; Šteffek, Libor (referee) ; Ostrý, Milan (advisor)
The task of the bachelor thesis was to process the documentation for the new apartment building with almost zero energy consumption. The apartment building is located in Olomouc, in a terraced development, in the gap site. The building is oriented to the northeast and southwest. The apartment building is designed as a basement with four floors. In the basement, there are three separate garages, storage rooms, and rooms for the technical operation of the building. A total of eight residential units are designed on the upper floors. Each apartment has a balcony or terrace. Barrier-free vertical transport is provided by an elevator located in the mirror of the staircase. The building is based on a reinforced concrete foundation slab. The vertical structures are made of sand-lime masonry. Horizontal load-bearing structures are reinforced concrete monolithic. The roof of the building is the gable. The apartment house is insulated with mineral wool insulation.
|
guest ::
