|
|
Digital commissioning of robotized workplace for cold spraying of rotating parts
Šimůnek, Petr ; Bražina, Jakub (referee) ; Vetiška, Jan (advisor)
This work deals with the virtual and later real commissioning of the workplace for cold spraying of rotating parts, which is located in the laboratories of the Institute of Materials Science and Engineering, Faculty of Mechanical Engineering, Brno University of Technology. The workplace put into operation in this way serves the employees of the mentioned institute for experimental activities in the field of cold spraying. The theoretical part of the thesis describes all the essentials associated with virtual commissioning and the theory of cold spray. The practical part then deals with the creation of a robotic program, including the user interface, which is used to control the workplace. Part of this diploma thesis is also the realization of the connection between the external motor driver and the robot controller via the PROFINET communication bus.
|
|
|
Digital commissioning of a robotic production system for machine tool tending
Roun, Jiří ; Bražina, Jakub (referee) ; Vetiška, Jan (advisor)
This master‘s thesis is about the digital commissioning of a robotic production system for a machine tool tending. The initial research describes the current state of the art in the field of industrial robotics. Their types and possibilities are followed by the types and SW capabilities for digital commissioning. The system analysis of the robotic work cell. The practical part of this thesis describes the creation of the digital model and SW design. At the end of the thesis is performed virtual testing of the robotic system.
|
|
|
Digital commissioning of a robotic production system for resistance welding
Šuba, Marek ; Bražina, Jakub (referee) ; Vetiška, Jan (advisor)
The subject of this diploma thesis is the simulation and digital commissioning of a robotic production system for welding elements such as studs on sheet metal parts. The basis of the work is search of information related to industrial robots, PLC control, tools used for welding, fixtures, manipulators, sensors, safety and protection elements commonly used in such production systems. The second part of the work deals with the given problem and it is a virtual commissioning of the given concept of a robotic production system. This means creating its simulation model in the Process Simulate environment, selecting robots, creating robotic trajectories, collision analysis, creating sensors, signals and optimization. Last part includes the connection of the simulation model with the software S-7PLCSIM Advanced and TIA Portal, the creation of control PLC logic in the form of a program, visualization and verification of their functionality using the above-mentioned connection with the simulation model.
|
|
| |
|
|
Design of belt grinder
Denk, Daniel ; Tůma, Jiří (referee) ; Pavlík, Jan (advisor)
Aim of this bachelor thesis is to produce a construction proposal of a belt grinder, which is, with respect to universality, adjustable in different axes. Grinding technology, belt grinder principle and description of the functionally important parts are presented in the first part. Second part is dedicated to the market research of existing belt grinders, evaluation of their construction design of an optimal belt grinder. Third part includes the necessary calculations, construction design analysis and economic evaluation of the optimal grinder and the project also contains its proposed 3D model created with Autodek Inventor Professional 2020 model nad drawing documentation.
|
|
|
Design of a robotic workplace for machining a cylindrical shaped part
Fajt, Petr ; Holub, Michal (referee) ; Knoflíček, Radek (advisor)
This diploma thesis is about the design of a robotic workplace for machining complex components. The theoretical part briefly discusses the issue of industrial robots, end effectors and CNC machines. The practical part is about design of individual devices. First is designed end effector for the robot, then manipulator, output checking station and palletizing equipment. Then the entire workplace is assembled. Next there are performed control calculations and at the end a risk analysis is done for the designed workplace.
|
|
|
Robot for Machine tool tending
Strach, Petr ; Huzlík, Rostislav (referee) ; Vetiška, Jan (advisor)
The aim of this bachelor's thesis is to design a robotic cell solution for machine tool operators. The introduction describes the current situation and examples of solutions directly from practice. The following are the different types of workplace layouts, where one solution was chosen, which was further analyzed in more detail. Furthermore, the work includes the selection of the robot, gripper, workplace safety. The aim of this work is also a 3D model of a cell and its simulation model in RobotStudio from ABB. The function of programming and verification of collision-free operation is verified in the simulation.
|
|
|
Workplace design for rearrangement of parts from pallets to frames
Němec, David ; Tůma, Jiří (referee) ; Knoflíček, Radek (advisor)
The bachelor thesis deals with a workplace design for rearrangement of high-pressure pump heads from pallets to frames at Bosch Diesel s.r.o. in Jihlava. Firstly, the introduction of the company with its products is mentioned and a closer look at the handled head of the high-pressure pump is given afterwards. This is followed by a research of a current market in the field of automation, robotics and industrial safety systems. Furthermore, there is a compiled analysis of the current workplace and the description of type spectrum of individual components. The followings are designs of possible implementation solutions and their description. A multicriteria method is used to select the most suitable variant. For the winning variant, a detailed design concept of the workplace is developed, and this is finally evaluated from a technical and economic point of view.
|
|
|
Calibration of Robotic Workspace
Uhlíř, Jan ; Veľas, Martin (referee) ; Kapinus, Michal (advisor)
This work is concerned by the issue of calibrating a robotic workplace, including the localization of a calibration object for the purpose of calibrating a 2D or 3D camera, a robotic arm and a scene of robotic workplace. At first, the problems related to the calibration of the aforementioned elements were studied. Further, an analysis of suitable methods for performing these calibrations was performed. The result of this work is application of ROS robotic system providing methods for three different types of calibration programs, whose functionality is experimentally verified at the end of this work.
|
|
|
Design of robotic workstation for automatic assembly of extruders for 3D printers
Pulicar, Roman ; Szabari, Mikuláš (referee) ; Kočiš, Petr (advisor)
Thesis is dealing with the creation of robotic worplace and its periphery. The paper is discrabing the robotic function and kinematics. The practical part of the paper shows several types of suggested robotic workplaces followed by solution processing of one selected type, where technical documentation and the calculation of production is made. The end of the paper shows economical and technological evaluation of the selected type of workplace including the price returns.
|
guest ::
