|
|
Design of small hobby CNC milling machine with fixed table
Hanzal, Jiří ; Marek, Tomáš (referee) ; Pavlík, Jan (advisor)
The topic of this work is the design of a small model CNC milling machine with a fixed table for machining wood, plastic, or light alloys (Al, Zn, etc.). It also includes a calculation report and drawing documentation of selected nodes. The beginning of this work consists of an introduction to the issue of milling machines, their distribution and subsequent market analysis. Subsequently, the input parameters are designed on the basis of market analysis and in the last part there is a calculation report, the design of the milling machine itself and a short economic evaluation.
|
|
|
Design of linear axis for heavy machine tool
Kubálek, Petr ; Marek, Jiří (referee) ; Hermanský, Dominik (advisor)
This diploma thesis deals with the design of the linear axis of a heavy machine tool. It describes the basic specifications of these machines, their manufacturers, the parts of which the axis consists and the design itself. The design includes several design variants, calculation of the movement mechanism, drive and linear guide. Follows the selection of the most suitable variant and the drawing documentation of the resulting linear axis.
|
|
|
The design of inverse pendulum
Kukla, Ondřej ; Zapletal, Tomáš (referee) ; Strecker, Zbyněk (advisor)
This thesis deals with design of inverted pendulum and experimental prove its functionality. Design was made in MATLAB Simulink software and experiment meant that pendulum can turn about 360°. In this thesis is described functional device which meets all asked requirements. There is also described process of design and construction of inverted pendulum which is the main benefit.
|
|
|
Energetic model of linear axis with ball screw and servodrive
Sládek, Vojtěch ; Tůma, Jiří (referee) ; Huzlík, Rostislav (advisor)
The aim of the thesis was to study the Energy Models of Linear Axes with Ball Screws and Servo Drives, to analyze the individual parts of the axis with respect to losses, the methodology of calculating the losses on the electrical part and the mechanical part of the drive and creating a complex algorithm that calculates the energy consumed for the specified motion. The thesis is divided into a theoretical and practical part, where the theoretical part is divided into the treatise on the electrical part of the axis and its losses and the part that deals with the mechanical part and its losses. The calculation is divided into the basic verification algorithm and the calculation on the given example. Each calculation is calculated for both linear acceleration and S-curve acceleration. For both types of acceleration, the result of energy and its course over time is also the waveforms of position, velocity, acceleration, angular acceleration, moments, powers, power, speed and currents over time.
|
|
|
Design of a headstock for a machine tool
Sehon, Tomáš ; Marek, Jiří (referee) ; Hermanský, Dominik (advisor)
This master’s thesis deals with design of a headstock for a machine tool. Theoretic part of this thesis provides basic description of a horizontal machine tool. Further it is dedicated to description of a headstock of machines with extensionable work spindle. In a design part firstly optimal variant is chosen by using multicriterial analysis. Necessary calculations were done and chosen variant was developed. Design is realised by 3D CAD model and drawing documentantion.
|
|
|
Design and analysis of the cross table
Zemčík, Matěj ; Pavlík, Jan (referee) ; Tůma, Jiří (advisor)
This thesis deals with the design of the cross table. That is, designing a linear guide, a ball screw and a motor. In addition, dynamic simulations are used in the MSC Adams for machining cycle and the positioning cycle of the semi-product at rapid traverse. As a simulation output are the „real“ load patterns of the bearings in the placing of the ball screws and the durability of these bearings.
|
|
|
Design of linear axis for heavy machine tool
Göbel, Lukáš ; Marek, Jiří (referee) ; Hermanský, Dominik (advisor)
The content of this thesis is the description the various component of the linear feed axis, which are used in heavy duty machine tools. This describes their features, advantages and disadvantages and on these basics, are selected different appropriate design variants. In the second part of this thesis has been drawn up constructional design of these variants. They were subsequently compared and then was chosen the most ideal one for the designed machine, which is heavy machine tool upper gantry type. The work also includes the 3D CAD model of the final version and drawing documentation.
|
|
|
Modular linear axis
Chlapečka, Tomáš ; Bilík, Martin (referee) ; Pavlík, Jan (advisor)
This thesis contains a structural design of linear axis with a stroke up to 800mm and a maximum load of 800N. The thesis also deals with a modular assembly system of the linear axis based on the structural design. Linear axes can be fitted with rolled, whirled and grinded ball screws with thread pitch 5, 10, 16mm and rolled trapezoidal screws on pitch 4 and 8mm. The stroke of the linear axes can be selected in the range from 200 up to 800 mm, with a maximum load of 800N in all linear dimensions. The feed of linear axis is provided by shaped rolling guide way and four trucks. The modular system offers two servo motors with direct and indirect measuring four stepper engines with indirect measuring. The thesis also includes strength and functional calculations of principal components, graphs of the possible load on linear axis in different positions , durability of the ball screws, maximum speed and feed rate of the chosen screws, data sheet, 3D model, drawings and assembly drawings of the nodes.
|
|
|
Electronics for Sewing Machine
Karásek, Josef ; Fedra, Zbyněk (referee) ; Vychodil, Josef (advisor)
The main components of the system for embroidery sewing machine is (Veritas 8014/35-2) and pointing devices. The machine automatically entered embroidered patterns, it is necessary to construct a pointing device and its control. To drive the pointing device used two stepper motors, the control circuit to cater to the ATmega128. Communication between PC and ATmega128 provides converter FT232.
|
|
|
Design of three axis manipulator
Srněnský, Jan ; Tůma, Jiří (referee) ; Holub, Michal (advisor)
The purpose of this thesis is to calculate drives of three axis manipulator. The aim is to create 3D model of machine, to analyze model and to use data for calculation. The aim is also to create blueprints of machine and calculation sheet. The thesis consists of four parts. Theoretical part, where principals of dental x-ray are described, kinematics explanation, description of part used to assembly machine and calculation part.
|
guest ::
