|
|
Apartment building
Drahokoupilová, Nela ; Šoulová, Eva (referee) ; Vlček, Milan (advisor)
The content of the bachelor thesis involves is the design of project documentation for the new apartment building BD1 in the town of Kroměříž. The building has one underground and three above ground floors with a residential attic and a gabled roof. The underground floor includes garages, cellar storage units and technical facilities. The above ground floors contain four living cells. The apartment of the first floor is barrier-free. The house is founded on foundation strips. The construction systm of the building is a wall made of ceramic blocks POROTHERM. The horizontal load-bearing structures consist of POT beams and MIAKO insters.
|
|
|
Detached house near Litomyšl
Simon, Matěj ; Kolář, Radim (referee) ; Jelínek, Petr (advisor)
The aim of this Bachelor’s thesis is to design a two-storey, single-family, near-zero-energy house, located in Čistá u Litomyšle. The thesis has two parts. The first part presents architectural and structural design, comprised of technical drawings, fire safety design and building physics. The second part presents a detailed design of sanitary installations a concept design of all the other building services and energy performance certificate. The house is located on a flat plot. It has a gabled roof with a dormer, a pitched green roof over a car shelter and a garden storage connected on the northern side. The ground floor comprises of an entrance, a guest room, a bathroom, a utility room, a living room with a kitchen and a pantry. The private zone is located on the first floor. It is made of a master bedroom with a walk-in closet, an office, two bedrooms, a bathroom, and a laundry room. The vertical structures are made of sand lime bricks, external walls are insulated with Twinner panels- EPS covered by a layer of MW. The roof in insulated with PIR. The horizontal structures are made of cast-in-place reinforced concrete. The house has a foundation slab insulated with foam-glass gravel. The main heat source of the house is an air-water heat pump, supplemented by a stove in the main living area and electric heating elements for hot water. The house is mechanically ventilated by a unit with heat recovery. There are photovoltaic panels installed on the roof. Rainwater is collected from the roof and stored for use in flushing and irrigation. Wastewater is treated by a household wastewater treatment plant, and it is infiltrated on site.
|
|
|
Single-family house
Kapounová, Kristýna ; Kolář, Radim (referee) ; Struhala, Karel (advisor)
The aim of the bachelor´s thesis is to design a nearly zero-energy single-family house. It is located in newly developed area in Ústí nad Orlicí. The thesis is divided into two parts. The first is part of the thesis includes architectural and structural designs and assessment of building physics (acoustic, lightning, thermal parameters) and fire safety, the second part focuses on the design of selected building services and energy performance of the building. The building has two stories and attached garage with workroom which has one storey. The building has gable roof and garage has green flat roof. The main entrance is situated to the north. On the first floor is situated living space of the house with living room connected to dining room and kitchen. Other rooms on the first floor are office, bathroom, toilet, utility room. On the second floor is a private zone where is master bedroom, two children bedrooms, wardrobe, bathroom, and toilet. The building is based on foundation strips made from plain concrete and concrete blocks with steel reinforcements. The walls are design from ceramic blocks and floor slabs are design from prefabricated beams and ceramic infills. The building envelope is insulated with mineral wool. Air conditioning in the house is ensured by a mechanical ventilation with recuperation. Waste water is directed into sewer system. Rain water is stored in an accumulation tank and from there into infiltration blocks, then water is also used for garden irrigation. Hot water is supplied by 200l hot water cylinder. Electricity is secured by photovoltaic panels with storage batteries and second source is public network. Heating is serviced by air-to-water heat pump and secondary source is fireplace with exchanger. Heat distribution is provided by floor heating system.
|
|
|
Detached house with fitness
Venzara, Pavel ; Kacálek, Petr (referee) ; Petříček, Tomáš (advisor)
The subject of this bachelor's thesis is the preparation of project documentation for the construction of a detached house with fitness. The building plot is on the outskirts of Slatiňany. The building has two above-ground floors and a partial basement. It consists of two operating parts. In the main building with a saddle roof, spaces are designed for family living. The fitness spaces are on the ground floor, covered with green roof. The place of business and the house have separate entrances. The operations are connected to each other on the ground floor through the office. The foundation structure consists of reinforced concrete foundation strips. The vertical structures are mainly made of clay blocks. The ceilings are designed as monolithic from exposed reinforced concrete.
|
|
|
Energy Efficient Building of a Family House
Palátová, Zuzana ; Wierzbická, Helena (referee) ; Vendlová, Lucie (advisor)
This balechor’s thesis deals with a project of newly designed nearly-zero energy building in Hrachovec. It has two parts – first part presents documentation for building permission which contains drawings, fire safety design, building physics, energy performance certificate and the second part deals with design of building services which contains concept design of all systems. The building has two storeys, rectangular shape, strip foundations, ceramic mansory walls and gabled roof extending over a carport on one side. The ground storey can be entered from carport. There is a kitchen connected with a living room, a bathroom, a toilet, a utility room and a storage room. In the first storey, there are two bedrooms, master bedroom, workroom and a bathroom. Concept design of bulding services contains mechanical ventilation with heat recovery, cooling, water supply, heating, sewage system, rainwater management, electrical installation and design of photovoltaic panels. Mechanical ventilation with heat recovery is located in a utility room. Space heating is provided via air-water heat pump with floor heating. The outdoor heat pump unit is located on southeast side of the building. The indoor heat pump unit is located in a utility room. Space heating in the bathrooms is complemented with towel radiators. In the living room, there is a stove. Electricity is produced by photovoltaic panels and the building is connected to a service line. The building is connected to the sanitary sewer. Stormwater sewer is connected to a stromwater tank and blocks for soaking. The stormater will be used for watering the garden.
|
|
|
Detached house in Opatovice
Řezáčová, Veronika ; Jelínek, Petr (referee) ; Dohnal, Jakub (advisor)
The aim of this bachelor’s thesis is to develop a documentation for building permit of a new-build single-family house. First part of this thesis focuses on architectural and structural design of detached house with separate garage. This part also contains building physics assessment and fire safety assessment. The house has a rectangular shape, two-storeys and it is roofed with a gable roof. On the ground floor, there is a wind lobby, a utility room, a hall with a staircase, a study, a small storage, a living room connected with a kitchen, a bathroom and a toilet. On the first floor, there is one master bedroom with a walk-in wardrobe, a bathroom and three children’s bedrooms. The structural system is designed as masonry composed of sand-lime blocks, external walls are insulated with EPS. Foundations and floor structure are designed as the cast-in-place reinforced concrete slabs and the roof structure is made of prefabricated elements. Second part contains the concepts of building services design and a documentation for building permit for the heating system. The main source of heat is an air-water heat pump. Domestic hot water is also heated by solar panels and the house is heated by floor heating. Ventilation is ensured by a mechanical ventilation unit with heat recovery. Rainwater will be collected in a storage tank and used for watering the garden. An energy performance certificate of the building is also included.
|
|
|
Apartment House in Břeclav
Kacrová, Marie ; Pilný, Ondřej (referee) ; Kalousek, Lubor (advisor)
The subject of the bachelor thesis is the elaboration of project documentation for a apartment building in Břeclav. The building is constructed using the POROTHERM system, it has a basement, and a pitched roof. It is a building with three above-ground floors, housing residential units. The underground floor contains the technical facilities of the building. Furthermore, a standalone garage with 4 parking spaces is designed, also constructed using the POROTHERM system and having a flat roof. The roofing of the building consists of a double-layer pitched roof with the supporting structure made of trusses. The building is insulated using thermal insulation blocks in the above-ground part and extruded polystyrene in the underground part. The footprint of the aparment building is 164.60 m2 and the garage is 92.40 m2.
|
|
|
Single-family house
Diblík, David ; Nespěšný, Ondřej (referee) ; Bečkovský, David (advisor)
The subject of this bachelor's thesis is the design of a new family house built from large-scale, multi-layered CLT panels, and the preparation of project documentation for the construction phase. The building is situated on a gently sloping site in the village of Račice near Dlouhé (Žďár nad Sázavou district). The concept and design respect the surrounding development and all mandatory municipal documents, particularly the zoning plan. The building consists of a single apartment, which, through its layout and material characteristics, corresponds with current technologies and elements in construction. On the ground floor, there is an entrance hall with a separate WC, a utility room, a living room with a kitchenette, and a bedroom with a separate dressing room leading to a private bathroom. The second floor is designed with two rooms each with its own dressing room, a study, and a shared bathroom. The family house is founded on strip foundations made of plain concrete, with vertical load-bearing and non-load-bearing elements made from massive wooden CLT panels. The exterior features include contact insulation using wood fiber insulation with façade plaster or ventilated wooden cladding. Horizontal load-bearing structures, such as the ceiling and flat roof with a waterproof membrane weighted down with washed river gravel, are constructed as ribbed ceilings with a limestone screed. The second floor is roofed with a gabled roof covered with aluminum standing seam panels, designed to accommodate photovoltaic panels and utilize alternative energy sources. The building is designed to have nearly zero energy consumption.
|
|
|
Apartment building
Vdoviak, Martin ; Borošová, Renata (referee) ; Brukner, Bohuslav (advisor)
The subject of this bachelor's thesis was the elaboration of project documentation for the construction of an energy-efficient residential building. The new construction of a detached residential building will be located in the northern part of Nové Město nad Metují on plot no. 258/14 in the cadastral area of Nové Město nad Metují. It is a five-story building with a basement, which includes three atypical floors. The basement contains garage space, technical facilities for the building, and storage areas for the residential building. The above-ground space predominantly consists of residential units, with a store also located on the first above-ground floor, but with its own entrance from the outside. The building is designed for 33 people in 13 different types of residential units. Access to individual units is through a common area of corridors, staircases, and via an elevator. The proposed structural system is wall-based with a stiffening core. The building has two types of roofs: a pitched roof made of wooden trusses above the main part and a single-layer flat roof above the remaining sections, partially accessible and bordered by a parapet. Load-bearing external walls in aboveground floors are made of load-bearing ceramic blocks. Non-load-bearing internal partitions are made of non-load-bearing ceramic blocks. The structure is founded on a foundation slab. The basement's perimeter walls consist of reinforced concrete monolithic walls. The internal load-bearing system consists of reinforced concrete columns. The building is insulated with EPS thermal insulation boards, meeting the requirements for External Thermal Insulation Composite Systems (ETICS). The insulated facade will be a combination of white color and cladding imitating dark stone, while the plinth will be finished with dark gray marble plaster. Sheet metal elements are designed from lacquered galvanized sheet metal in dark gray color. The frames of external openings are dark gray
|
|
|
Víchov cider house and cannery
Gulárová, Aneta ; Muroň, Ivo (referee) ; Ležatka, Lukáš (advisor)
This bachelor thesis deals with a new building primarily used for production and storage and secondarily for administrative space. The building is designed in the area of Tachov in the Víchov part of the town of Černošín in the Pilsen region. Access to the land is from the south side of the main road 230 in the direction from Stříbro to Černošín and the second access is from the west side of the dirt road through the village Víchov (the road is currently unused). Both roads are connected by a newly designed road within the plot. The majority of the newly proposed road is used for the supply and removal of goods. The whole concept is designed with respect to the local conditions and referring to the character of the area and also to the investor's requirements. Due to the scale of the village, the height of the building is adapted. The structure of the building is made up of a wall bearing system, where in the part of the administration and warehouses carries a gable roof, which consists of wooden glued trusses. The roof sheathing is made of corrugated metal sheet, which also forms part of the facade. The external façade is made up of timber cladding and cladding made of folded sheet metal. A separate logo was also designed for the building as part of the study, which is located on the front façade of the office building. The proposed building SO.01 will be used as an administrative building for the employees of the cooperage and cannery, who are also part of the production but also administration and management. The building also includes dining facilities for all employees, locker rooms and offices, as well as a showroom for visitors and meeting space for any business meetings of the owner. The building also serves as a representative object of the entire proposal. In the proposed building SO.02 will be located exclusively production or waste warehouse, or warehouse of unprocessed fruit. Dry storage and product storage is not part of the project.
|
guest ::
