|
|
Determination of Q/h characteristics of spillways of the sluice chamber of the Brno-Modřice WWTP in conditions of influenced flow
Škrancová, Markéta ; Ježek, Jiří (referee) ; Žoužela, Michal (advisor)
The work deal with the measurement, processing and analysis of Q/h characteristics of the sluice chamber in the wastewater treatment plant on a physical hydraulic model in the conditions of influencing the overflow phenomenon by the groundwater level. Based on the achieved results, a measuring system has been projected in the area of the sluice chamber to measure the flow and flow rate of lightened water into the Svratka river. The measurements on the model were performed in the premises of the Laboratory of water Management Research of the Institute of Water Structures of the Faculty of Civil Engineering of Brno University of Technology by the author of this work. The results of the diploma thesis is a flow chart describing the calculation procedure used to determine the immediate flow, on the basis of which a new software of the evaluation unit of the measuring system was realized.
|
|
|
Thermoluminescence measurement system
Matějka, Tomáš ; Král, Jan (referee) ; Kubíček, Michal (advisor)
This thesis deals with revision and design of electronic for measuring system PSI TL 500 which is designed for measurement of thermoluminescence phenomena in photosystem II. Thesis describes principles and properties of the measuring system in its current form and changes for the new version are discussed. Digital control part based on Xilinx Zynq platform is designed. Revision of analog measuring part of system is made and partial changes are implemented.
|
|
|
Determination of the Q/h characteristic of storm water overflow chamber
Škrancová, Markéta ; Ježek, Jiří (referee) ; Žoužela, Michal (advisor)
The main task of this bachelor thesis is to determination the Q / h characteristics of the sluice chamber in the wastewater treatment plant on a physical hydraulic model, processing of all measured values and their analysis. All measurements were performed by the author of this work in the premises of the Laboratory of Water Management Research of the Institute of Water Structures of the Faculty of Civil Engineering of the Brno University of Technology. The result of the bachelor thesis is an equation used to determine the immediate flow which will be entered into to evaluation unit of the newly built measuring system. It will be located in the sluice chamber of the wastewater treatment plant and will be used to measure the flow and flowed amount of overflow water into the Svratka River.
|
|
| |
|
|
Position control of cross-table dedicated manufacturing machine
Plocek, Jaroslav ; Vetiška, Jan (referee) ; Houška, Pavel (advisor)
The bachelor thesis treats the drive solution of the two axis cross-table of a single-purpose manufacturing machine. The first chapter analyzes the concept of drives and compares different variants using either a direct linear drive or a ball screw with a rotary servo drive. The thesis further deals with sizing the motor and the power unit assembly and the description of the whole measuring system. The structure of cascading position controller, its description and the calculation of current and speed control loops is covered in the next part. The last section discusses practical settings of all control parameters.
|
|
|
Design of linear axis for heavy machine tool
Göbel, Lukáš ; Marek, Jiří (referee) ; Hermanský, Dominik (advisor)
The content of this thesis is the description the various component of the linear feed axis, which are used in heavy duty machine tools. This describes their features, advantages and disadvantages and on these basics, are selected different appropriate design variants. In the second part of this thesis has been drawn up constructional design of these variants. They were subsequently compared and then was chosen the most ideal one for the designed machine, which is heavy machine tool upper gantry type. The work also includes the 3D CAD model of the final version and drawing documentation.
|
|
|
THE USE OF ELETRONIC MEASURING SYSTEMS FOR MONITORING STRUCTURES
Kovács, Pavel ; Zich, Miloš (referee) ; Doc.Ing. Karel Kubečka, Ph.D (referee) ; Daněk, Petr (advisor)
This thesis deals with the use of the electronic measuring systems for monitoring structures. The first part of this work is focused on mapping the available measuring systems for monitoring deformations and strains, from the point of their measurement accuracy, the real advantages and disadvantages, including examples of monitoring of constructions. In the second part were selected measuring systems for monitoring strains and deflection interest structure. Subsequently, the measuring system with online recording into the tested roof structure was installed and the loading test was performed. Obtained data were compared with other two independent measurements. In the last part of the thesis, the measured values of each independent measurements were compared together, and with the values calculated from the mathematical model. The achieved results show that the installed monitoring system is capable to reliably measure deformation of the structure in real time and thus to warn the building administrator against the potential danger in advance.
|
|
| |
|
|
Modelling of differential current amplifier
Polák, Josef ; Šotner, Roman (referee) ; Jeřábek, Jan (advisor)
The aim of my diploma thesis was programming of systems for measuring AC, DC and impedance measurements. Each measuring system measures selected characteristics of current amplifier with controllable amplification DACA_N. Control programs I have created in Agilent VEE Pro 9.2. The measured data are stored to executable files in MS Excel for further processing. With created measurement programs I made measurements of eight current amplifiers. The results of individual measurements I compiled into graphs and compared with each other circuit characteristics of amplifiers. Then there is described controlling and connection of current amplifier and its construction. At the end the diploma thesis describes amplifiers with the worst and the best measured circuit characteristics. The measured values show that the amplifier DACA_N with slight differences works by theoretical assumptions and measurement systems suggested by me work with no problem.
|
|
|
The multi-channel measuring system for measurement of the relative intensity of light
Damajka, Štěpán ; Havránek, Zdeněk (referee) ; Šedivá, Soňa (advisor)
The aim of the bachelor´s thesis is design and realization of multi-channel measuring system for relative light intensity measurement. The first part of the thesis is devoted to introduction into basic light and its sensor. The next point is to design of measuring system. This system was proposed in respect of input requirements include the ability to set as high as possible level of output voltage, system linearity, DC and AC measurement and signal overload detection. The result of the thesis is fully functional measuring system, which is able to measure 8 channels simultaneously.
|
guest ::
