| |
|
Case study on utilizing of heat from the nuclear power plant Dukovany in the district heating system
Kozel, David ; Drbošal, Jan (referee) ; Pospíšil, Jiří (advisor)
In this thesis, I was solved assessment of nuclear power plant Dukovany, conection to the hot water network to city Brno. For determine the size needful enforcement was necessary to establish the heat balance of needs of the city of Brno and the size of the heat supply options. After that it was possible to determine the dimensions of pipes and optimize his routes of due to the current state of land along the route of thermal power supply. Power supply parameters were chosen with regard to the possibilities of technology used for transmission of the media and the status quo for distribution of the city Brno. After pushing the power supply ahead of the city Brno into the pumping station Bosonohy, and second part of the solution was the connection to the backbone wiring SCZT heat to individual customers. The last point was elaborated design management system of heat from nuclear power plant and urban local based resources on current management of heat supply system using consumption diagrams SCZT.
|
|
Use of Interest Rate Models for Interest Rate Risk Management in the Czech Financial Market Environment
Cíchová Králová, Dana ; Arlt, Josef (advisor) ; Cipra, Tomáš (referee) ; Witzany, Jiří (referee)
The main goal of this thesis is to suggest an appropriate approach to interest rate risk modeling in the Czech financial market environment in various situations. Three distinct periods are analyzed. These periods, which are the period before the global financial crisis, period during the financial crisis and in the aftermath of the global financial crisis and calming subsequent debt crisis in the eurozone, are characterized by different evaluation of liquidity and credit risk, different relationship between financial variables and market participants and different degree of market regulations. Within this goal, an application of the BGM model in the Czech financial market environment is crucial. Use of the BGM model for the purpose of predicting a dynamics of a yield curve is not very common. This is firstly due to the fact that primary use of this model is a valuation of interest rate derivatives while ensuring the absence of arbitrage and secondly its application is relatively difficult. Nevertheless, I apply the BGM model to obtain predictions of the probability distributions of interest rates in the Czech and eurozone market environment, because its complexity, direct modeling of a yield curve based on market rates and especially a possibility of parameter estimation based on current swaptions volatilities quotations may lead to a significant improvement of predictions. This improvement was also confirmed in this thesis. Use of swaptions volatilities market quotations is especially useful in the period of unprecedented mone- tary easing and increased number of central banks and other regulators interventions into financial markets that occur after the financial crisis, because it reflects current market expectations which also include future interventions. As a consequence of underdevelopment of the Czech financial market there are no market quotations of Czech koruna denominated swaptions volatilities. I suggest their approximations based on quotations of euro denominated swaptions volatilities and also using volatilities of koruna and euro forward rates. Use of this approach ensures that predictions of the Czech yield curve dynamics contain current market expectations. To my knowledge, any other author has not presented similar application of the BGM model in the Czech financial market environment. In this thesis I further predict a Czech and Euro area money market yield curve dynamics using the CIR and the GP models as representatives of various types of interest rates models to compare these predictions with BGM predictions. I suggest a comprehensive system of three criteria, based on comparison of predicti- ons with reality, to describe a predictive power of selected models and an appropria- teness of their use in the Czech market environment during different situations in the market. This analysis shows that predictions of the Czech money market yield curve dynamics based on the BGM model demonstrate high predictive power and the best 8 quality in comparison with other models. GP model also produces relatively good qua- lity predictions. Conversely, predictions based on the CIR model as a representative of short rate model family completely failed when describing reality. In a situation when the economy allows negative rates and there is simultaneously a significant likelihood of their implementation, I recommend to obtain predictions of Czech money market yield curve dynamics using GP model which allows existence of negative interest rates. This analysis also contains a statistical test for validating the predictive power of each model and information on other tests. Berkowitz test rejects a hypothesis of accurate predictions for each model. However, this fact is common in real data testing even when using relatively good model. This fact is especially caused by difficult fulfilment of test conditions in real world. To my knowledge, such an analysis of the predictive power of selected interest rate models moreover in the Czech financial market environment has not been published yet. The last goal of this thesis is to suggest an appropriate approach to obtaining pre- dictions of Czech government bonds risk premium dynamics. I define this risk premium as a difference between government bond yields and fixed rate of CZK IRS with the same length. I apply the GP model to describe the dynamics of this indicator of the Czech Republic credit risk. In order to obtain a time series of the risk premium which are necessary for estimation of GP model parameters I firstly estimate yield curves of Czech government bonds using Svensson model for each trading day since 2005. Resulting si- mulations of risk premium show that the GP model predicts the real development of risk premiums of all maturities relatively well. Hence, the proposed approach is suitable for modeling of Czech Republic credit risk based on the use of information extracted from financial markets. I have not registered proposed approach to risk premium modeling moreover in the Czech financial market environment in other publications.
|
|
The Liberalisation of the Electricity Market in Poland
Bahula, Dušan ; Zajíček, Miroslav (advisor) ; Halás, Vladimír (referee)
This diploma thesis deals with the development of the Polish power sector since the introduction of the first energetic law with the orientation on the electricity. It describes the development of the production sector, the distribution sector and the transmission sector. It is devoted also to the privatisation of the subjects that act on this market. This thesis deals with the development of the cross border auctions with the neighbouring countries, concretely the Czech Republic, Slovakia and Germany. It tracks the development of the offered amounts of the capacities from the shortterm and longterm perspective. It describes the issue connected with the longterm contracts of the Polish transmission operator and its whole function on the market. It tracks down the electricity price development from the year 2000, it mentions the recent electricity prices of the Polish market and deals with the possible future price development.
|
|
Frequency stabilized semiconductor laser source for high-resolution interferometry
Řeřucha, Šimon ; Hucl, Václav ; Holá, Miroslava ; Čížek, Martin ; Pham, Minh Tuan ; Pravdová, Lenka ; Lazar, Josef ; Číp, Ondřej
We have assembled an experimental iodine stabilized Distributed Bragg Reflector (DBR) diode based laser system lasing at a wavelength that is in a close proximity to the wavelength of a stabilized He-Ne lasers traditionally used for metrological applications (λ=632.9 nm in vacuum). The aim was to verify whether such a system could be used as an alternative to the He-Ne laser while yielding wider optical frequency tuning range, higher output power and high frequency modulation capability. We have measured the basic characteristics of the laser source and then we have compared the performance of the laser system with that of a traditional frequency stabilized He-Ne laser with a series of experimental arrangements similar to those usually found in laser interferometry and displacement metrology applications. The results indicate that DBR diode laser system provides a good laser source for applications in dimensional (nano)metrology since it provides more output power and advanced tunability options than stabilized He-Ne lasers while maintaining fundamental requirements such as the frequency stability, coherence length and also a defined traceability.\n\n
|
|
Usage hydropower potential on river Tichá Orlice
Rybka, Michal ; Procházka, Zdeněk (referee) ; Matoušek, Antonín (advisor)
This bachelor thesis solves proposal of small hydro power station. The first part deals with energy resources, especially water energy and energy use in the Czech Republic. River Ticha Orlice is characterized in other part, comparing of five weirs is necessary part. Next chapter is proposal of small hydro power station particular its electrical parts, including the connection to the distribution system. Finally, investment evaluation of proposed small hydro power station is mentioned.
|
|
Noise, Transport and Structural Properties of High Energy Radiation Detectors Based on CdTe
Šik, Ondřej ; Lazar, Josef (referee) ; Navrátil, Vladislav (referee) ; Grmela, Lubomír (advisor)
Poptávka ze strany vesmírného výzkumu, zdravotnictví a bezpečnostního průmyslu způsobila v posledních letech zvýšený zájem o vývoj materiálů pro detekci a zobrazování vysokoenergetického záření. CdTe a jeho slitina CdZnTe. jsou polovodiče umožnují detekci záření o energiích v rozsahu 10 keV až 500 keV. Šířka zakázaného pásma u CdTe / CdZnTe je 1.46 -1.6 eV, což umožňuje produkci krystalů o vysoké rezistivitě (10^10-10^11 cm), která je dostačující pro použití CdTe / CdZnTe při pokojové teplotě. V mé práci byly zkoumány detektory CdTe/CdZnTe v různých stádiích jejich poruchovosti. Byly použity velmi kvalitní spektroskopické detektory, materiál s nižší rezistivitou a výraznou polarizací, detektory s asymetrií elektrických parametrů kontaktů a teplotně degenerované vzorky. Z výsledků analýzy nízkofrekvenčního šumu je patrný obecný závěr, že zvýšená koncentrace defektů způsobí změnu povahy původně monotónního spektra typu 1/f na spektrum s výrazným vlivem generačně-rekombinačních procesů. Další výrazná vlastnost degenerovaných detektorů a detektorů nižší kvality je nárůst spektrální hustoty šumu typu 1/f se vzrůstajícím napájecím napětí se směrnicí výrazně vyšší než 2. Strukturální a chemické analýzy poukázaly, že teplotní generace detektorů způsobuje difuzi kovu použitého při kontaktování a stopových prvků hlouběji do objemu krystalu. Část mé práce je věnována modifikaci povrchu svazkem argonových iontů a jejímu vlivu na chemické složení a morfologii povrchu.
|
|
Utilization of biomas in power plants in Czech Republic
Červinka, Petr ; Mastný, Petr (referee) ; Macháček, Jan (advisor)
The main idea of this project is get to know a distribution of biomass .We will serve out biomass acording to its types and using of it, we are going to compare biomass between the Czech republic and Europian Union. In this project we will inform you about a technology of burning with the fosill cooler.We will write about energic and economic classification too. Actual europian trend faces to more frequently using of a renewable recources energy, where the biomass is the most important part.
|
|
Program pro výpočet provozních parametrů velkých transformátorů
Karban, P. ; Doležel, Ivo
About fifteen years ago Prof. Doležel started developing a relatively large program package for solution of a wide spectrum of tasks associated with operation of large power transformers. The program ordered by one of the principal Czech manufacturers - ŠKODA Plzeň - was written in FORTRAN 77 for environment MS-DOS supplemented with memory extender DBOS and contained the following modules: Solution of 2D magnetic field distribution in the window. It could be calculated either analytically (provided that the window contains no ferromagnetic subdomains such as shunts) or numerically, using the finite element method.
|
|
Remediation of former In-Situ uranium mining region.
Kříž, Jakub ; Kalous, Jaroslav (referee) ; Jícha, Jaroslav (advisor)
Remediation process of region, formally exploited for chemical leaching of uranium, is based on pumping water contaminated mostly by residuals of sulfuric acid from the relevant geological horizons. The contaminated water is then treated in a chemical plant. In the treatment process evaporators play the key role. Presently operating evaporators – three units – are of falling film type. Heating service is provided by compressed vapor that is generated by evaporators. For driving the compressors and associated circulating pumps of each unit electric power of 3,4 MW is required. In the evaporators treated solution is distributed into individual tubes by nozzles of cyclone type that are mounted at the top end of tubes. In the evaporators feed solution contains calcium sulfide of low concentration. Once the calcium sulfide concentration in the evaporating process reaches the state of saturation, even locally, fouling is initiated. Thus the solids start to grow on the inner surface of the tube wall and the nozzle’s openings become restricted. The evaporator performance – evaporating rate – gradually declines and when it reaches the bottom limit the evaporator has to be shut down. This is followed by carrying out the cleaning procedure. At the time when the evaporators started operating (1996) the period between shut downs lasted around a half a year. However, gradually, this period has become substantially shorter – presently it may even last one week only. The thesis proposes two ways of approaching the present hardly acceptable state. First, replacement of distributing nozzles by a set of properly perforated sieve trays secures the uniform distribution of solution into each individual tube. Second, evaporators’ duty will be taken over by newly build multi-flash concentrator that will substitute the presently operating evaporators. Configuration of this new equipment is derived from widely used multi-flash distillation of sea water. Heat required by the concentrator’s end heaters is drawn from a gas turbine exhaust gas. Steam provided by Heat Recovery Steam Generator is supplied to the condensing heat exchangers installed on the evaporator’s feed stream. Generator coupled to the gas turbine, fueled by natural gas, provides the electric power of 30 MW for export.
|
guest ::
