Národní úložiště šedé literatury Nalezeno 11 záznamů.  1 - 10další  přejít na záznam: Hledání trvalo 0.01 vteřin. 
Alternative Methods for the Analysis of Structural Changes in Muscle Tissue
Kaspar, Pavel ; Hrabovský, Miroslav (oponent) ; Adam, Vojtěch (oponent) ; Grmela, Lubomír (vedoucí práce)
In this dissertation the topic of structural change analysis of muscle tissue and the methodical approach to this measurement is explored. Even though a considerable number of detection methods for the evaluation of specific changes in muscles exist, especially in the meat intended for consumption, the vast majority focuses only on a single process within the tissue and requires complicated approach and expensive instruments. The topic of this work is therefore not finding more precise and specific means of analysis, than the already existing ones, but rather to select an alternative approach to the given problematic. Part of the explored approach is also the endeavor to find a way to bypass the technological requirements while staying as close to the informational value of the high end methods as possible. To this end an informational base of theoretical knowledge and the experience in experimental approaches in the field of physics, optics and biological tissues and processes is required. The three main approaches described in this work are based on the acquired information throughout the research of the topic and understanding of the basic workings of muscle tissue. The methods created for this thesis make use of photons in the transmission and reflection measurement setup. By observing the changes in absorption, dispersion and polarization of the light after the interaction with muscle tissue sample the other optical parameters are evaluated, including the refractive index and optical anisotropy. The identification of changes in optical parameters together with the Monte Carlo simulation allows for distinction between fresh, aged, dried, frozen and thawed, and refrozen and thawed samples.
Noise, Transport and Structural Properties of High Energy Radiation Detectors Based on CdTe
Šik, Ondřej ; Lazar, Josef (oponent) ; Navrátil, Vladislav (oponent) ; Grmela, Lubomír (vedoucí práce)
Because of demands from space research, healthcare and nuclear safety industry, gamma and X-ray imaging and detection is rapidly growing topic of research. CdTe and its alloy CdZnTe are materials that are suitable to detect high energy photons in range from 10 keV to 500 keV. Their 1.46 -1.6 eV band gap gives the possibility of high resistivity (10^10-10^11 cm) crystals production that is high enough for room temperature X-ray detection and imaging. CdTe/CdZnTe detectors under various states of their defectiveness. Investigation of detector grade crystals, crystals with lower resistivity and enhanced polarization, detectors with asymmetry of electrical characteristics and thermally degenerated crystals were subject of my work in terms of analysis of their current stability, additional noise, electric field distribution and structural properties. The results of the noise analysis showed that enhanced concentration of defects resulted into change from monotonous spectrum of 1/f noise to spectrum that showed significant effects of generation-recombination mechanisms. Next important feature of deteriorated quality of investigated samples was higher increase of the noise power spectral density than 2 with increasing applied voltage. Structural and chemical analyses showed diffusion of metal material and trace elements deeper to the crystal bulk. Part of this work is also focused on surface modification by argon ion beam and its effect on chemical and morphological properties of the surface.
Studium vlastností CdTe senzorů
Vašíček, Martin ; Holcman, Vladimír (oponent) ; Grmela, Lubomír (vedoucí práce)
Tato bakalářská práce se zabývá studiem vlastností CdTe detektorů. Popisuje analýzu transportních a šumových charakteristik vzorků CdTe při různých teplotách. Vyhodnocení získaných výsledků dokazuje, že se rozhraní CdTe chová jako dvojice antisériově zapojených diod. Průběhy VA charakteristik se vyznačují lineárním nebo lehce exponenciálním růstem. Při vzrůstající teplotě roste i vodivost vzorků. Měření prokázala rozdíl vodivosti testovaných vzorků při stejné teplotě. Dále je zřejmé, že v rozsahu velmi nízkých kmitočtů dominuje složka šumu 1/f. Od kmitočtu 10 Hz převažuje zastoupení šumu tepelného.
Noise and Transport Analysis of the Niobium Oxide Layers
Sita, Zdeněk ; Hájek, Karel (oponent) ; Koktavý, Bohumil (oponent) ; Grmela, Lubomír (vedoucí práce)
Niobium oxide capacitor is a new type of passive components, which was developed to overcome basic disadvantages of Tantalum capacitors – limited ore source and burning failure mode. Similarly to Tantalum one, the niobium oxide capacitor can be described as a reverse MIS structure. V-A characteristics in normal and reverse mode at 77 and 300K, capacitance dependence of depleted layer on voltage and frequency, temperature and time dependence of leakage current and noise spectral density in frequency and time domains for different voltages were used to study charge carrier transport mechanisms in Nb2O5 dielectric and to define physical parameters, controlling the leakage current. Experimental data verified validity of proposed MIS structure band diagram and provided its key parameters. It was proven that the charge carrier transport in NbO capacitors is given by ohmic, Poole-Frenkel and tunnelling component in normal mode, and Schottky emission in reverse mode. Poole-Frenkel mechanism in normal mode and Schottky emission in reverse mode are dominant in the standard application voltage range. At high voltages, the tunnelling mechanism in normal mode determines breakdown voltage of the capacitor. In reverse mode, the barrier height between dielectric and anode determines resistance against thermal breakdown of the capacitor. It was found that NbO and Ta capacitors have identical conductivity mechanisms. Specifics of NbO anode material are reflected only in different values of the band diagram parameters, not in the principles of charge carrier transport mechanisms. This explains basic difference between both capacitors, which is in the quality of the dielectric layer at the anode - dielectric interface. Lower potential barriers and higher number of defects in the dielectric, caused by additional stable oxide, result in higher leakage current of NbO capacitor. This effect has however no effect on reliability of the component. Theoretical models and determined testing methods were used to select proper anode materials, to evaluate suitable dopants for NbO raw material improvement and to optimize the anodic oxidation technology. Charge carrier transport parameters were correlated with the reliability and on the basis of experimental data optimization of the capacitors manufacturing process was proposed. Better understanding of transport mechanisms in the NbO capacitors gave complete overview of the new Niobium oxide based component with highlighting strong and weak points of this new technology, and provided tools for better understanding of driving forces which improve efficiency and reliability of NbO capacitors.
Methods of Preparation and Characterization of Experimental Field-Emission Cathodes
Knápek, Alexandr ; Luňáček, Jiří (oponent) ; Lazar, Josef (oponent) ; Grmela, Lubomír (vedoucí práce)
This PhD thesis describes, and covers the preparation of field-emission cathodes that represent a high-quality, inexpensive source of electrons for devices that work with a focused electron beam. In this work, an improved method of electrochemical fabrication is used for the preparation of a composite field-emission cathode. The composite structure improves current stability in comparison to tungsten-based pure field-emission cathodes. Improvements to the technology used were implemented on the basis of findings obtained using spectrum noise diagnostics, which are based on measuring and evaluating the emission current in the time and in frequency domains. Additionally, noise spectroscopy provides important information about charge transport, electron mobility, and lifespan, which is essential for future research. Results obtained using the experimental method have been further supplemented with theoretical data provided by a computer simulation in order to establish characterization procedures for improved field-emission cathodes.
Transport elektrického náboje v tantalovém kondenzátoru
Pelčák, Jaromír ; Koktavý, Bohumil (oponent) ; Hájek, Karel (oponent) ; Grmela, Lubomír (vedoucí práce)
Cílem této práce bylo studium vlastností tantalových kondenzátorů s pevným elektrolytem. Kondenzátor typu Ta – Ta2O5 – MnO2 svým složením představuje MIS strukturu, kde tantalová anoda má kovovou vodivost a burel – MnO2 je polovodič. Izolační vrstva je tvořena pentoxidem tantalu Ta2O5 s relativní permitivitou r = 27. Tloušťka izolační vrstvy je v rozmezí 30 až 150nm. Náboj kondenzátoru není akumulován jen na elektrodách, ale také na lokalizovaných stavech (kyslíkových vakancích) v izolační vrstvě. Kondenzátor zapojený v normálním režimu představuje strukturu typu MIS zapojenou v závěrném směru, kdy přiložené napětí zvyšuje potenciálovou bariéru mezi polovodičem – burelem a izolantem – Ta2O5. V normálním modu – při přiložení kladného napětí na Ta, je transport nosičů náboje izolační vrstvou určený Poole-Frenkelovým mechanismem a tunelováním. Při nízké intenzitě elektrického pole je dominantní Poole-Frenkelův mechanismus transportu náboje, při vyšší intenzitě elektrického pole je proud určen tunelováním. Při nízké intenzitě elektrického pole se projeví i ohmická složka proudu určená odporem příměsového pásu vytvořeného v izolantu donorovými stavy kyslíkových vakancí. Na základě modelování naměřených VA charakteristik lze odhadnout efektivní tloušťku dielektrika Ta2O5 a určit podíl Poole-Frenkelova a tunelového proudu na transportu náboje. V mé práci je popsáno rozložení náboje na tantalovém kondenzátoru v oblasti nízkých frekvencí a provedena analýza charakteristik kondenzátoru ve frekvenční oblasti. Prvotním podmětem pro tuto práci je snaha vytvoření náhradního modelu tantalového kondenzátoru z hlediska jeho fyzikálního a elektrického chování. Na základě náhradního elektrického modelu lze pak dále zkoumat a stanovit rozložení a transport elektrického náboje v kondenzátoru. Změřením elektrických parametrů lze taktéž dospět k určení potenciálových bariér a rozložení potenciálu ve struktuře kondenzátoru. Tato metodika spočívá v analýze elektrických charakteristik kondenzátoru, pomocí nichž se vytvoří fyzikální model kondenzátoru popisující jeho funkci, vlastnosti a chování.
Šumová spektroskopie detektorů záření na bázi CdTe
Zajaček, Jiří ; Štourač, Ladislav (oponent) ; Hájek, Karel (oponent) ; Grmela, Lubomír (vedoucí práce)
Předmětem této práce je šumová spektroskopie detektorů (-záření a paprsků X) vyrobených na bázi CdTe. Vychází se ze sledování hladiny nízkofrekvenčního nadbytečného šumu při transportu náboje jak v časové tak ve frekvenční oblasti prostřednictvím spektrální hustoty výkonu (PSD) s logaritmickým rozlišením frekvenční osy. V práci je nově popsaný návrh měřící metody PSD, který je odvozený od diskrétní vlnkové transformace a dává srovnatelné výsledky s dříve užívanou analogovou technikou. Na námi vytvořený model monokrystalu CdTe je možno pohlížet jako na antiseriové spojení dvou Shottkyho diod s rezistorem mezi nimi. Ten pak představuje odpor v objemu vzorku polovodiče, který se mění v důsledku změny koncentrace nosičů při konstantních podmínkách jako je teplota nebo přiložené napětí či osvětlení. Při změně teploty se vzorek CdTe zpočátku chová jako kov. V důsledku změny pohyblivosti nosičů (děr nebo elektronů) pak začnou převládat vlastnosti polovodiče díky jejich tepelné generaci. Spektrální hustota výkonu nízkofrekvenčního šumu závisí na počtu volných nosičů ve vzorku. U všech zkoumaných vzorků byla hladina šumu 1/f mnohonásobně vyšší než se dá určit pomocí Hoogeho teorie. To je způsobeno nízkou koncentrací nosičů ve vyprázdněné vrstvě záporně polarizovaného kontaktu.
Radiation Detectors Noise Spectroscopy
Andreev, Alexey ; Grmela, Lubomír (vedoucí práce)
Cadmium Telluride is a material of great importance in the fields of both fundamental research and technical applications, because of its structural, optical, electronic and photoelectronic properties. Today the main application of Cadmium Telluride is in high resolution detection of -rays and X–rays. The main advantage of radiation detectors manufactured on CdTe base is that they need no cooling and can operate at the room temperature and there is a more effective interaction of photons in CdTe than in either Si or Ge. The transport and noise characteristics of CdTe samples were studied. The measurements show that the bulk resistance of CdTe single crystals decreases very slowly when the external electric field is applied. n-type samples and p-type samples show different response on the temperature changes. These effects were analyzed. The noise measurements show that dominant noise at low frequencies is type of 1/f noise. At higher frequencies generation-recombination and thermal noise were apparent. All the studied samples have very high value of low frequency noise, much higher than it should have been according to Hooge’s formula. The sources of excess noise were investigated.
Charakterizace autoemisních zdrojů pro elektronovou mikroskopii
Vašíček, Martin ; Tománek, Pavel (oponent) ; Grmela, Lubomír (vedoucí práce)
Tato práce se zabývá teoretickými základy emise elektronů do vakua, jednotlivými typy emisí se zaměřením na studenou a Schottkyho emisi a principu tunelového jevu. V další části se práce věnuje technické realizaci elektronových zdrojů s detailním prostudováním metodiky laboratorní výroby katod elektrochemickým leptáním a konstrukcí elektronových mikroskopů, využívajících autoemisních zdrojů. Součástí práce je návrh metody pro měření, zpracování a vyhodnocování elektrických charakteristik emisních zdrojů.

Národní úložiště šedé literatury : Nalezeno 11 záznamů.   1 - 10další  přejít na záznam:
Viz též: podobná jména autorů
1 Grmela, Libor
Chcete být upozorněni, pokud se objeví nové záznamy odpovídající tomuto dotazu?
Přihlásit se k odběru RSS.