|
| |
|
|
Augmented Reality for Desk Board Game
Richter, Jiří ; Sochor, Jakub (referee) ; Beran, Vítězslav (advisor)
Cílem této práce je vytvořit systém, který bude vylepšovat zážitek z hraní deskových a především karetních her, promítáním relevantních multimediálních informací do herního prostoru. V první části jsou popsány přínosy deskových a karetních her. Dále jsou představeny principy rozšířené reality a jejich použití při návrhu takového systému. Navržený systém je rozdělen na tři moduly. Prvním z nich je modul, který analyzuje stav hry na stole v reálném světe --- poskytuje informace o aktivitě hráčů a jaké typy herních objektů se vyskytují na stole. Druhým je modul, který se stará o řízení celého systému, poskytuje uživatelské rozhraní pro kalibraci systému a implementuje stavový prostor hry, pro kterou je systém určen. Třetím je modul, který poskytuje výstup systému --- vytváří multimediální obsah, který je po-té promítnut na stůl, a je relevantní k aktuálnímu stavu hry. Na závěr je navržený systém implementován pro karetní hru Bang, otestována jeho schopnost udržovat krok se stavem hry v reálném světě a provedeno testování na uživatelích.
|
|
|
Hydraulic analysis of the supply pipeline to the Kravsko reservoir in Znojmo city
Jaroš, Zdeněk ; Lušovský, Michal (referee) ; Ručka, Jan (advisor)
This thesis provides hydraulic analysis of an existing water supply pipeline from Kasárna reservoir to Kravsko reservoir near Znojmo. The thesis structure is divided into two parts – the first is theoretical, the second part is a practical research. The theoretical part outlines currently used procedures, principles and available software programs. Thesis concentrates on a software called EPANET 2.0 which is also used for hydraulic analysis. In the research part, the thesis offers a description of the chosen site, a field survey followed by the process of assessment and a construction of a hydraulic model by the EPANET 2.0 software. The final part evaluates performed hydraulic analysis and proposes concepts for water supply pipeline renovation.
|
|
|
Assembly line innovation project for thermostatic heads at Honeywell
Fical, Karel ; Neužil, Karel (referee) ; Kubík, Roman (advisor)
The object of this work is to propose innovative solutions on the assembly line in company Honeywell. Optimization of this line will be achieved by changing the concept of calibration. The current stabilization in air-conditioned chamber will be replaced by operational calibration incorporated in the assembly line, which will depend on ambient temperature. This work will be mainly contained a description of the current status, the proposed changes and economic evaluation.
|
|
|
Hydraulic roughness of water supply pipes
Náplavová, Eva ; Hofmannová, Lenka (referee) ; Ručka, Jan (advisor)
This bachelor’s thesis deals with hydraulic roughness of water pipelines, its consideration while making a hydraulic model and subsequent calibration of hydraulic simulation model. In the theoretical part literary review about current approach to hydraulic modeling of water mains and its possible future direction is carried out, as well as an overview of used roughness coefficients, computational formulas and possible approaches to calibration of the hydraulic model. In the practical part of the thesis, a matematical model of the supply main of the water mains network of Hvozdná is compiled and is followed by its calibration. The method of weighted least squares is used as an objective function. Optimization methods are used to minimize the value of the objective function and thus to determine the hydraulic roughness of supply main.
|
|
|
Circuit Parameters Measurement by S parameters - Laboratory Experiment
Karniš, David ; Láčík, Jaroslav (referee) ; Urbanec, Tomáš (advisor)
Bachelor thesis describes a method of measuring impedance suitable for determining the properties of RF and microwave circuits. The main objective is to get acquainted with S parameters, method of measuring them with vector analysis and with equivalent circuits of passive elements. Further is discussed the issue of calibration and its parts. The following section describes the product design process, concluded by verification of measuring method and design.
|
|
|
Automatic calibration of inercial sensors
Hamada, Vladimír ; Vágner, Martin (referee) ; Macho, Tomáš (advisor)
The main aim of this thesis is to design and build automatic calibration system for inertial measurement sensors. The calibration system is intended to support the development of devices with inertial measurement sensors. The great emphasis is placed on the configurability of system and for this reason all calculations are realized by Matlab system, which is well known by engineers. There is also presented design of inertial measurement unit, which is used as a~model sensor unit for calibration system development.
|
|
|
Calibration of Talysurf CCI coherence scanning interferometer
Varava, Anastasia ; Jankových, Róbert (referee) ; Harčarík, Matej (advisor)
This master’s thesis deals with calibration of a coherence scanning interferometer Talysurf CCI Lite. Basic terms related to surface texture evaluation were described along with selected profile and areal surface texture parameters. The working principle and design of the calibrated instrument were explained. Manufacturer’s calibration procedure was analyzed in relation to the definition of calibration in the International vocabulary of metrology. Further calibration steps leading to calculation of measurement uncertainty were presented. Last but not least, measurement uncertainties of areal surface texture parameters Sq and Sz were evaluated. The procedures and results described in this thesis may contribute to wider use of non-contact surface texture measuring instruments.
|
|
|
Automated oscilloscope calibration
Krejz, Jan ; Bartoň, Jan (referee) ; Šedivá, Soňa (advisor)
The Bachelor thesis deals with the preparation and subsequent automated calibration of the Rhode&Schwarz RTB2002 oscilloscope using the Meatest 9010 calibrator. The first part brings a theoretical introduction to the environment of Caliber and the issue of calibration of oscilloscopes. The second part contains the preparation and design of the calibration procedure including its practical implementation and comparison of the results of the automated and manual calibration of the chosen oscilloscope.
|
|
|
Basic measurement on the Vector network analyzer
Lapčík, Josef ; Urbanec, Tomáš (referee) ; Dřínovský, Jiří (advisor)
This bachelor project concerns with a vector network analyzer for measurement of reflection coefficient, carry coefficient and scattering coefficients. Main parts of vector network analyzer and principle of analyzer with relation to possible areas of error correction are described. Possibilities of using modern vector network analyzer are shown in relation to their conception. Second part of the project deals with design of filters and directional coupler designed for measuring on analyzer. Designs of lowpass filter, bandpass filter and branch-line directional coupler are describe in details. Results of filters analysis from program Ansoft Designer and results of measurement on vector network analyzer are appended. The last part of project focus on creation of application for automatic measurement on network analyzer in program interface Agilent VEE.
|
guest ::
