|
|
Building budgeting as part of building information modeling (BIM)
Průša, David ; Hanák, Michal (referee) ; Tichá, Alena (advisor)
The main aim of this task deals with analysis of the possibility of valuing building budgets in the building information model (BIM). The work is divided into two parts. The first, research part, presents the necessary definitions and concepts, such as definitions of BIM, LOD, CDE, which are needed for working with (BIM) software. The second, practical part, analyses possible ways to determine building budgets using the building information model on one building, which was modeled in the student version of Graphisoft ArchiCAD 24.
|
|
|
3D modeling of a part of the building of SPŠ stavební Brno
Penk, David ; Jursík, Petr (referee) ; Kuruc, Michal (advisor)
The thesis deals with the creation of a 3D model from data collected by laser scanning. The first part deals with the theoretical foundations of buildings information modeling and method of laser scanning. The rest of the work describes the detailed process from data collection to the creation of the model. Most of the space is devoted to work in the Revit software environment.
|
|
|
Revitalization of a multi-purpose building in the village
Federla, Jakub ; Nováková, Eva (referee) ; Kolář, Radim (advisor)
The aim of master‘s thesis is to renovate old agricultural building and design it as nzeb building. The thesis contains three parts: 1st – design of the building, 2nd – design of building services, and 3rd – assessment of the impact of different operations in building on energy consumption. The results are then evaluated for economic and environmental savings. The renovated building in village Rozkoš will be used for many purposes. It will be divided into 3 parts – a multifunctional hall, a pub, and a club room. Multifunctional hall will be used for various activities for village itself or public. In the pub will be only cold kitchen with small dishes and beverages. Club room can be used for elderly people, workout or young people. The building is low rise and structural system is combined. The vertical load-bearing walls and columns are built of bricks. Horizontal load-bearing structures are cross vaults made also of bricks. Saddle roof is made of timber roof truss. The building site contains also an outdoor car park and a garden. The project was carried out in the Revit.
|
|
|
The use of BIM in water management work
Chládová, Zuzana ; Remeš, Josef (referee) ; Duchan, David (advisor)
This diploma thesis addresses Building Information Management (BIM) and its application in water management. The basis of the work is broad research on BIM. Subsequently, the application of BIM is demonstrated in the construction of a small hydroelectric power plant in the Litovel water management node. To conclude, the added value of using BIM and its possible disadvantages for water management are formulated.
|
|
| |
|
|
Design of a heating system for an office building
Vítek, Lukáš ; Horká, Lucie (referee) ; Vyhlídalová, Karolína (advisor)
The aim of this bachelor thesis is to design a proposal of space heating and water heating system for an administrative building in Ostrava. The building has four above-ground floors and an underground floor. In the underground floor are located technical building background, stocks and a parking. In the above-ground floors are administrative offices. The heating is solved as a water heating, with a distribution of the heat into the space using panel radiators and convectors. Water heating is solved by an accumulation heater. As a heating energy source serves a cascade gas boilers. We can find in the whole building a forced ventilation. The theoretical part of this thesis deals with the BIM technology.
|
|
|
Senior's Boarding House
Huleja, Adam ; Struhala, Karel (referee) ; Košíčková, Ivana (advisor)
This thesis is deals with design of a Senior’s Boarding House in Lomnicka u Tisnova. Building four-storey building with one service basement floor with This thesis deals with a design of a retirement home in Lomnicka u Tisnova. This is a four storey building with one service basement floor and with a flat roof. The structural system is of a transverse wall type. Material of structural elements is a combination of reinforced concrete and masonry. The building is founded on piles. In addition, the design includes a restaurant for warming and serving food prepared in different place, laundry and a small pool. All construction drawings and schedules has been developed as building information model (BIM).
|
|
|
Kindergarten and primary school in Škrdlovice
Peňáz, Zdeněk ; Vystrčil, Jan (referee) ; Šuhajda, Karel (advisor)
The aim of this master project is to design a nzeb kindergarten and primary school in Škrdlovice. The building has three parts: kindergarten and primary school with 2 above–ground floors and basements are connected with a single canteen. The canteen has a flat extensive green roof, while the kindergarten and primary school have saddle roof. The kindergarten has two identical floors with playrooms, locker rooms, bed and toy storage, teacher’s office, and bathrooms. First floor of the primary school contains locker room, teacher’s’ offices, it classroom, afterschool centre, and toilets. Three classrooms, headmaster’s office, and toilets are in the second floor. The building is designed using Xella building system. The external load–bearing walls, slabs, and internal non–bearing walls are made of aerated concrete blocks. The internal load–bearing are made of lime–sand blocks. The building is insulated with non–fibrous mineral panels. The project includes design of lightning, HVAC, DHW, and photovoltaics systems. The project also includes a study of three structural details including 3D models in BIM software and their thermal assessment. The project was designed using BIM software Revit.
|
|
|
Laser scanning for building information modeling (BIM)
Kocourek, Adam ; Kuruc, Michal (referee) ; Volařík, Tomáš (advisor)
This master's thesis deals with the creation of an information model of a part of a historical building of the rectory in the village of Cetkovice based on a point cloud. The thesis includes creation of geometrically and visually accurate window and door families according to the real-life template, taking into account the benefits of this approach for conservation purposes. In addition to the resulting model of a part of the building, the main outputs of the thesis include visualizations created in the Twinmotion software. This thesis also evaluates practical and economic feasibility of the potential outputs of the model.
|
|
|
Using BIM for Real Estate Valuation
Sliška, Andrej ; Komosná, Milada (referee) ; Jandásková, Tereza (advisor)
The main objectives of this diploma thesis are to introduce the building information model as an effective tool, helping at work with the buildings throughout their lifecycle and to consider its use for real estate valuation, from the point of view of individual valuation methods, used in Czech Republic. The real estate valuation methods and the functional principles of building information model, as well as its features, are described in the first part of the thesis. In addition, the first part of the thesis also deals with the model implementation conditions in selected countries of the world. The second part of the document contains consideration for model usage in the valuation practice. A practical demonstration of working with the model is also included in this thesis.
|
guest ::
