|
|
Study of plasmachemical reduction of corrosive layers on brass
Řádková, Lucie ; Selucká, Alena (referee) ; Krčma, František (advisor)
The main topic of this bachelor thesis is plasmachemical treatment of archeological artifacts, especially plasma chemical treatment of brass corrosion layers. Low-pressure, low-temperature hydrogen plasma is used for this process. Nowadays, the technology is used mainly for iron or silver based materials but even for them the optimal conditions for the corrosion removal are not fully known yet. The knowledge about other metallic materials is fully missing. Two sets of brass samples were prepared in different corrosion atmospheres. The first atmosphere was prepared using saturated vapors of HCl. The samples were in this atmosphere during one month, and corrosion layers were orange-brown. The second set was prepared using ammonium solution, the samples were in this atmosphere for one day, corrosion layers were blue. The generation of capacitively coupled plasma in continuous mode by different supplied power was done. The experiments were carried out at 100 Pa with hydrogen gas flow of 50 sccm. Discharge power was varied in the interval 50 – 200 W and the treatment duration was 70 – 140 min. The optical emission spectroscopy of OH radical was used to find out all changes those have been resulting from plasmachemical reactions. The OH radical integral intensities were observed, they were used to monitoring plasma chemical reduction process. Spectral intensity of spectroscope was in the range 290 – 330 nm. After the plasmachemical treatment, it was very difficult to remove corrosion layers of HCl, but removing of NH3 corrosion layers was easy. It was caused by type of corrosion process (corrosion layers were influenced by time of corrosion process). This bachelor thesis is the start to find out conduct corrosion layers of brass in plasma treatment. In future, plasma treatment could be used to treatment of real archaeological artifacts.
|
|
|
Study of plasmachemical reduction of corrosive layers on bronze
Zemánek, Nikola ; Selucká, Alena (referee) ; Krčma, František (advisor)
The application of low-pressure low-temperature hydrogen plasma on artificial corrosion layers on bronze has been studied. For this purpose, three sets of bronze corroded samples were prepared. The first step of the model sample preparation was grinding of the bronze surface by using emery with 60, then 280 and finally by 600 grains density, in order to achieve the defined surface roughness. The next step of the work were optical and scanning electron microscopy observations with energy dispersive X-ray micro analysis (SEM-EDX) of the prepared bronze sample for purpose of surface structure characterization and element composition determination. Bronze samples with defined surface structure were corroded in different corrosion atmospheres. Three different model corrosion layers were formed by acidic atmospheres of hydrochloric acid, nitric acid and sulphuric acid. The element composition and structure of corrosion layer was determined by SEM-EDX again. The different amounts of oxygen, nitrogen, chlorine, sulfur, copper, tin and lead in the corrosion layer according to different types of corrosion atmospheres were determined. The next and also main part of the work was a plasma chemical reduction of corroded samples. The plasma reactor used the RF discharge (13.56 MHz) created in quartz tube with outer electrodes. The generation of capacitively coupled plasma in continuous or pulse mode by different supplied power was carried out. The plasma radiation emitted from the RF discharge during the sample treatment was measured by optical emission spectroscopy. The quantity of OH radical created in an active discharge by reactions of atomic hydrogen with the corrosion layer is a significant indicator of a reduction process. Therefore the OH radical band integral intensities observed as a function of the treatment time were used as a monitor for plasma chemical reduction process. The OH emission showed different behavior depending on corrosion layer composition during the plasma treatment. The transformations of the corrosion layer due to the plasma effect were investigated by means of SEM-EDX once again. Changes in the element composition of corrosion (or surface) layers in consequence of plasma chemical treatment are given. Generally, the element composition after the plasma chemical treatment showed explicitly that oxygen and chlorine content in the corrosion layer decreased, nitrogen was removed totally. Metal deposition on the reactor wall was observed occasionally. The SEM-EDX analyzes also showed that in some cases the tin content in sample surface layers was significantly decreased. For that reason, in case of bronze sample (artifacts) treatment, the sample and plasma temperature seem to be very important parameters for the process optimization. The acceptable conditions for plasma chemical treatment has been found in case of corrosion layer formed by nitric acid, only. The other corrosions will be a subject of further studies.
|
|
|
Study of plasmachemical reduction of corrosive layers on bronze
Miková, Petra ; Selucká, Alena (referee) ; Krčma, František (advisor)
One of the important stages of the human history is certainly Bronze Age, on our territory dated 1900 - 800 BC. At that times, it was produced many objects of bronze, such as swords, spears, daggers, ornaments, jewelry. These artifacts are now found by archaeologists in excavations around the whole world. During the years there was an exposure to various types of substances and the environment and result in extensive corrosion of the used materials. To better understand the culture and traditions of our ancestors, it is necessary to carefully eliminate the corrosion and thorough inspection of these subjects. In this work, we consider the model corrosion layers removal by reduction in low-temperature hydrogen plasma. Plasma chemical reduction method was developed during the eighties years of last century and currently is further rapidly improved. Unfortunately, the process mechanism is not yet precisely known. Preparation of model corrosion layers were as follows: bronze blocks (weight approximately 80 g) were sharpend by electrical grinding machine (used paper 280 and then 600). Thus treated samples were rinsed in ethanol, dryed by hot dryer and stored in plastic bags. A Petri dish was placed at the bottom of the desiccator and it was poured by 20 ml of concentrated hydrochloric acid. Above the bowl has punched ceramic grid, on which the samples were placed. Closed desiccator was placed in darkness at the ambient laboratory temperature. To accelerate the samples corrosion process in a desiccator, the samples were sprinkled with acid. Plasma chemical treatment was carried out in a cylindrical reactor of quartz glass with outer copper electrodes. The RF (13.54 MHz) capacitivelly coupled plasma was used for the samples treatment. For each sample have been selected specific conditions: power (50 - 300 W), pulse (duty cycle of 10 – 25 %) or continuous mode. The optical emission spectroscopy monitored dependence of OH- intensity during the reduction. The decrease to the 1/10 of the maximum value leads to end the experiment. Based on this criterion, the treatment time of samples was in the range of 30 - 80 minutes. Corrosion has been removed from 7 samples. All the samples were covered by corrosion deep green color with a clearly visible crystalline structure before their inserting into the reactor. After the treatment, the color was dark black, and after leaving the air began to surface green, in some samples was observed in white and yellow tint. Surface top layer was removed on samples 1 and 5, where spontaneous dropout was reached. The pulse mode with duty cycle of 10 % and the powers of 200 and 300 W were applied for these two samples. The surface layer of samples treated with pulsed mode of 25 % was easily removable by spatula. The work demonstrated the applicability of hydrogen RF plasma in pulsed mode for the corrosion removal from bronze samples. The further work will be focused on the optimal treatment conditions search.
|
|
|
Study of plasmachemical reduction of corrosive layers on copper
Šimšová, Tereza ; Selucká, Alena (referee) ; Krčma, František (advisor)
The present diploma thesis concerns the research of plasmachemical reduction of copper corrosion layers. The process was based on using low pressure hydrogen RF plasma in which copper samples are treated for several hours. Four series of copper corrosion layers were prepared in four different corrosion atmospheres. The first two were prepared using saturated vapors of HCl and ammonium acetate that affected copper samples for one week. The second two sets were prepared by samples dipping in HNO3 and H2SO4. EDX analysis confirms visual composition of corrosion layers – chlorides, nitrides and sulphate, respectively. The ammonium acetate produced no corrosion layers and thus this set of samples was omitted. The optical emission spectroscopy was used to find out reactions in a hydrogen RF discharge. At the first, a character of plasma without samples was taken by measuring in continuous and pulsed regime. The integral spectrum intensity (300-700 nm) and intensities of hydrogen atomic lines were observed in the dependences on hydrogen flow, power and duty cycle. After that copper samples were treaded under various conditions in continual and pulse regime, typically at pressure of 170 Pa, 200 W power and hydrogen flow rate of 10.2 ml/min. The integral OH radical spectral intensity in the range of 305 – 330 nm was used as a monitor of plasma treatment process. The experimental results showed that intensities of OH radical depended strongly on the corrosion layer kind as well as on the RF discharge mode. Reduction of corrosion layers treated in the pulsed regime was not so satisfactory then in the continuous regime probably due to lower temperature of sample during the treatment. The total supplied energy into the system was also lower in this case. The sample sputtering was observed during the reduction in continuous regime. It means the corrosion was successfully removed but the process was not stopped at that moment, so it is necessary to propose another additional monitoring process besides observing OH radicals. Our experimental results are the first step in the spread research of plasmachemical treatment of copper made archaeological artifacts.
|
|
|
Reduction of bronze corrosion layers using hydrogen plasma
Miková, Petra ; Selucká, Alena (referee) ; Krčma, František (advisor)
This diploma thesis is focused to the plasma chemical reduction of model corrosion layers prepared on bronze samples. Bronze was the main material for production of the subjects in Bronze Age. First, it was very rare, and therefore was used only for making jewellery and other decorative subjects. Later, the objects of daily use and weapons were produced of bronze. These objects are found and it is necessary to restore him and preserve the cultural heritage for future generations. The research and the optimalization of plasmochemical reduction of model corrosion layers on bronze samples contributes to this. A metallographic grinder was used to create a defined surface, first with the sandpaper P 280 and then after sample 90 degree rotation with the sandpaper P 600. This ensured uniform surface at all bronze samples that is necessary to provide the same corrosion conditions. The grinded samples were washed by ethanol and dried by hot air stream. To prevent contact with the surrounding atmosphere and successive initiation of corrosion, the samples were stored in lockable polyethylene bags. This step was followed by the preparation of model corrosion layers. Hydrochloric and sulfuric acids were chosen as corrosive environments. Petri dish containing 20 ml of the selected acid was placed at the bottom of the desiccator. Samples were placed to the ceramic grate, over the dish, and they were corroded (in vapours of hydrochloric acid for 34 days and in vapours of sulfuric acid for 27 days). The corroded samples were treated using low-pressure hydrogen plasma excited by RF generator. Treatment of samples was carried out in quartz cylindrical reactor (length of 90 cm, inner diameter 9.5 cm) with copper electrodes placed outside. The pressure in the reactor was ranged around 160 Pa at hydrogen flow rate of 50 sccm during the experiments. The continuous and pulse modes (duty cycle of 25%, 50% or 75%) at peak power of 50–300 watts were used for the treatment of 90 minutes duration. The plasma treatment was monitored by optical emission spectroscopy of OH radical using compact Ocean Optics HR4000 spectrometer. Its integral intensity is proportional to the corrosion layer removal. The rotational temperatures of plasma were calculated using selected OH rotational lines, too. The sample temperature during the treatment was measured by thermocouple installed inside the additional non-corroded samples. The reduction of corrosion layer is successful when the maximum of relative intensity of OH radicals is produced and follow gradual decline. The samples which corroded in vapours of sulphuric acid and were treated in pulse modes with duty cycle of 25 % or with delivered power of 50 W has produced no maximum. To the remain samples the maximum although were observed, but reduced corrosion products on the surface were very cohesive. The maximum of relative intensity of OH radicals was observed at all samples corroded in vapours of hydrochloric acid. But there is problem with temperature of sample during experiment. The samples which layer of corrosion product was after experiment incoherent produced the layer of deposit tin. This effect formation at a higher temperature of sample during experiment and therefore with greater deliver energy.
|
|
|
Metodika uchovávání předmětů kulturní povahy
Selucká, Alena ; Mrázek, Martin ; Štěpánek, Ivo ; Mazík, Michal ; Grossmannová, Hana ; Jirásek, Pavel ; Holman, Pavel ; Jakubec, Petr ; Fricová, Jana ; Vácha, Zdeněk ; Červenák, Jan ; Dvořák, Martin ; Němec, Václav ; Dušková, Markéta ; Fogaš, Igor ; Bačovský, Jiří
Metodika poskytuje doporučení pro správnou praxi dlouhodobého uchovávání předmětů kulturní povahy v paměťových institucích. Předkládá logickou osnovu zohledňující důležité aspekty související s budovami, jejich vnitřním prostředím, bezpečnostními kritérii a možnými riziky, spojenými se způsoby užívání předmětů kulturního dědictví. Metodika si klade za cíl též ozřejmit možnosti vyhodnocování vhodnosti stavebních objektů pro dlouhodobé ukládání předmětů kulturní povahy i ze strany jejich majitelů či provozovatelů tak, aby bylo možné predikovat jejich vliv na uložené fondy a udržitelnost provozu.
Fulltext:  PDF
|
|
|
Heritage process of art and craft techniques of goldsmithing
Bárta, Patrick ; Fexa, Pavel ; Foret, Lukáš ; Jelínek, Jaroslav ; Kroužil, Martin ; Mrázek, Martin ; Rapouch, Karel ; Řezáčová, Eva ; Vaníček, Petr ; Příhoda, Jiří ; Selucká, Alena ; Stöhrová, Pavla ; Šumbera, Andrej
The goal of the heritage process is to provide a comprehensible guide for identifying the most widespread art and craft techniques for the processing of precious metals, their correct description and the setting of appropriate approaches to their preventive and remedial conservation. In the first section, the art and craft techniques of goldsmithing are described in detail, based on the material characteristics of selected metals and their alloys, a description of the techniques themselves in connection with the historical context of their use, including risk factors of damage to artefacts made by these techniques. The terminology used is also supplemented, which is subsequently elaborated in the form of alphabetically ordered keyword lists in the appendices of the heritage process. The second section consists of a set of case studies containing reconstructions of the procedures of selected craft techniques, including examples of surveys of original artefacts verified in museum practice.
Fulltext: PDF
|
|
|
Methodology of electrolytic metal cleaning methods using an electrolyte based on modified gels
Rapouch, Karel ; Hájková, Kateřina ; Selucká, Alena ; Perlík, Dušan ; Kouřil, Milan
The methodology aims to provide simple instructions for conservators-restorers on how to set suitable conditions for local and gentle cleaning of corrosion products of silver and copper, in order to avoid mechanical damage to the surface of the object and influence of surrounding (especially organic) materials in the case of multi-material objects of a cultural heritage. As part of the methodology, various gels were studied in terms of their physico-chemical properties and their compatibility with chemicals from which an electrolyte can be prepared for the electrolytic cleaning of metal surfaces. Artificially patinated samples and selected real objects were used for the experiments. Furthermore, the possibility of using gel electrolytes for the study of corrosion products by the method of polarization measurements was investigated. The methodology can be applied not only in the improvement of procedures for the treatment of museum collection items, but also in the field of processing archaeological finds or in teaching conservation-restoration students and other related fields of cultural heritage care.
Fulltext: PDF
|
|
|
Metodika uchovávání předmětů kulturní povahy
Selucká, Alena ; Mrázek, Martin ; Štěpánek, Ivo ; Mazík, Michal ; Grossmannová, Hana ; Jirásek, Pavel ; Holman, Pavel ; Jakubec, Petr ; Fricová, Jana ; Vácha, Zdeněk ; Červenák, Jan ; Dvořák, Martin ; Němec, Václav ; Dušková, Markéta ; Fogaš, Igor ; Bačovský, Jiří
Fulltext: PDF
|
|
|
Reduction of bronze corrosion layers using hydrogen plasma
Miková, Petra ; Selucká, Alena (referee) ; Krčma, František (advisor)
This diploma thesis is focused to the plasma chemical reduction of model corrosion layers prepared on bronze samples. Bronze was the main material for production of the subjects in Bronze Age. First, it was very rare, and therefore was used only for making jewellery and other decorative subjects. Later, the objects of daily use and weapons were produced of bronze. These objects are found and it is necessary to restore him and preserve the cultural heritage for future generations. The research and the optimalization of plasmochemical reduction of model corrosion layers on bronze samples contributes to this. A metallographic grinder was used to create a defined surface, first with the sandpaper P 280 and then after sample 90 degree rotation with the sandpaper P 600. This ensured uniform surface at all bronze samples that is necessary to provide the same corrosion conditions. The grinded samples were washed by ethanol and dried by hot air stream. To prevent contact with the surrounding atmosphere and successive initiation of corrosion, the samples were stored in lockable polyethylene bags. This step was followed by the preparation of model corrosion layers. Hydrochloric and sulfuric acids were chosen as corrosive environments. Petri dish containing 20 ml of the selected acid was placed at the bottom of the desiccator. Samples were placed to the ceramic grate, over the dish, and they were corroded (in vapours of hydrochloric acid for 34 days and in vapours of sulfuric acid for 27 days). The corroded samples were treated using low-pressure hydrogen plasma excited by RF generator. Treatment of samples was carried out in quartz cylindrical reactor (length of 90 cm, inner diameter 9.5 cm) with copper electrodes placed outside. The pressure in the reactor was ranged around 160 Pa at hydrogen flow rate of 50 sccm during the experiments. The continuous and pulse modes (duty cycle of 25%, 50% or 75%) at peak power of 50–300 watts were used for the treatment of 90 minutes duration. The plasma treatment was monitored by optical emission spectroscopy of OH radical using compact Ocean Optics HR4000 spectrometer. Its integral intensity is proportional to the corrosion layer removal. The rotational temperatures of plasma were calculated using selected OH rotational lines, too. The sample temperature during the treatment was measured by thermocouple installed inside the additional non-corroded samples. The reduction of corrosion layer is successful when the maximum of relative intensity of OH radicals is produced and follow gradual decline. The samples which corroded in vapours of sulphuric acid and were treated in pulse modes with duty cycle of 25 % or with delivered power of 50 W has produced no maximum. To the remain samples the maximum although were observed, but reduced corrosion products on the surface were very cohesive. The maximum of relative intensity of OH radicals was observed at all samples corroded in vapours of hydrochloric acid. But there is problem with temperature of sample during experiment. The samples which layer of corrosion product was after experiment incoherent produced the layer of deposit tin. This effect formation at a higher temperature of sample during experiment and therefore with greater deliver energy.
|
guest ::
