|
|
Analysis of multiphase electrical machine performance
Kříž, Antonín ; Mach, Martin (referee) ; Bárta, Jan (advisor)
In this thesis, a research on the history and current applications in transport of multiphase motors was conducted. Subsequently, a research on the aspects related to multiphase induction machines was carried out. Finally, the electromagnetic model of six phase induction machine was investigated in the in healthy condition and one faulty phase. The changes of parameters and motion of the motor were compared for both conditions.
|
|
|
Braking of an induction machine
Mareček, Šimon ; Janda, Marcel (referee) ; Mach, Martin (advisor)
The work is focused on the braking of an induction engine and the risks associated with it. In the first part, there are readers acquainted with the technical parameters of the induction engine, which is used for simulations. The second part focuses on the simulation program Ansys Maxwell and the finite element method. In the third part, there are readers introduced to a general description of the induction machine. The fourth part consists of countercurrent braking. The penultimate part is devoted to dynamic braking. The last part contains a brief introduction to generator braking. The chapters focused on braking are supplemented by simulated waveforms.
|
|
|
Treatment of sludges from water treatment plants
Mach, Michal ; Kučera, Tomáš (referee) ; Biela, Renata (advisor)
The bachelor thesis focuses on the methods of disposal and the use of water sludge generated in the treatment of water used nowadays. The work is divided into a theoretical part and a practical part. The theoretical part is focused on the basic properties of sludge, its composition and getting acquainted with technological solutions leading to its treatment and disposal today. The practical part introduces the specific water treatment in the Czech Republic, and how specifically these treatment plants deal with the issue. Based on the practical part, it is possible to present more about how are these problematics in fact mostly solved.
|
|
|
Cooling of electric machines
Benčo, Branislav ; Mach, Martin (referee) ; Janda, Marcel (advisor)
The bachelor thesis is focused to the calculation of cooling of electrical machines by various methods and their subsequent comparison. This work is divided into several chapters in which the methods are described including when and in which cases is suitable for calculation.
|
|
|
Braking of an induction machine
Mareček, Šimon ; Janda, Marcel (referee) ; Mach, Martin (advisor)
The work is focused on the braking of an induction engine and the risks associated with it. In the first part, there are readers acquainted with the technical parameters of the induction engine, which is used for simulations. The second part focuses on the simulation program Ansys Maxwell and the finite element method. In the third part, there are readers introduced to a general description of the induction machine. The fourth part consists of countercurrent braking. The penultimate part is devoted to dynamic braking. The last part contains a brief introduction to generator braking. The chapters focused on braking are supplemented by simulated waveforms.
|
|
| |
|
| |
|
|
Losses reduction of single-phase induction motor
Vaško, Dávid ; Mach, Martin (referee) ; Vítek, Ondřej (advisor)
Bachelor thesis Losses reduction of single-phase induction motor deals with issues of increasing the efficiency of single-phase induction motor JMO90-4S-90 from EMP s.r.o. Slavkov near Brno. The first part deals with the theory of induction motors, especially single-phase motors and analysis of losses in induction machines. The second part deals with the introduction of motor solutions and methods used for loss reduction. In the third part, the thesis deals with the calculating selected parameters, the design of motors in RMxprt, and their modification for improving efficiency. The fourth part deals briefly with the design of motors in Ansys Maxwell, comparison of results obtained from Maxwell and RMxprt with the results from measurement for motor JMO90-4S-90 and comparison of results from Maxwell and RMxprt for other motor solutions.
|
|
|
Design of oil distribution transformer
Mrajca, Miroslav ; Mach, Martin (referee) ; Ondrůšek, Čestmír (advisor)
This master thesis deals with the manufacturing process of oil distribution transformers. Firstly, the thesis devotes to the design arrangement of the magnetic circuit and its manufacturing technology. The procedure of cutting laminations for core and their building into the core. Subsequently, the thesis describes technologies used for manufacturing primary and secondary windings including procedures on winding machines. Then it deals with the production of the tank and the final assembly of the transformer into one unit. The next part of the thesis discusses the design procedure of the assigned distribution oil transformer with a numerical calculation while respecting the requirements of the standards. Finally, the costs of the material of the designed transformer are determined.
|
|
|
3,8 kW induction machine
Stoican, Bogdan Adrian ; Ondrůšek, Čestmír (referee) ; Mach, Martin (advisor)
Úkolem této semestrální práce je návrh asynchronního motoru. Pro výpočet technických parametrů asynchronního motoru je použita analytická metoda, která je implementována do vytvořeného počítačového programu. Výsledek je ověřen pomocí programu ANSYS RMxprt. Technickým úkolem je umístit tento motor do určeného prostoru. Návrh sleduje stanovené technické parametry a výsledek respektuje požadovaný průměr statoru i optimalizaci jeho rozměrů. Pomocí programu ANSYS RMxprt jsou výsledky analyzovány s cílem najít technické řešení umožňující zmenšení rozměrů stroje. V závěru práce je návrh motoru změněn dle výsledků, které umožňují optimalizaci technických parametrů návrhu stroje.
|
guest ::
RSS feed.