|
| |
|
|
Steel structure of a sport hall
Lorenc, Jakub ; Horáček, Martin (referee) ; Balázs, Ivan (advisor)
The subject of this bachelor’s thesis is the design and assessment of main load-bearing elements of the steel structure of sport hall in Lužice. The building is of rectangular plan of dimensions 37,12x51 m and height 12,8 m. The load-bearing structure consists of arched truss girders, which are pin-supported by fixed columns. The distance between main trusses is 6 m and they are connected by purlins and girts. The spatial rigidity of the structure is ensured with a system of bracings. The structure elements are made of steel class S235, the cladding consists of sandwich panels.
|
|
|
Joints from FRP composite intended for transport infrastructure
Simon, Pavel ; Maňas,, Pavel (referee) ; Schmid, Pavel (referee) ; Karmazínová, Marcela (advisor)
This thesis deals with junction points of construction used in transport infrastructure, which are made of FRP composite material. Main focus is on bonded joints. The material and geometrical criteria od FRP material and there influence to junctions are analyzed. In sequential steps the development of the design of joints applicable to reference constructions - pedestrian walkways is documented. There are also presented practical experiences from the tests of joints of overlapped and single-sided joints, as well as experience from the design, production and testing of two types of pedestrian bridges on a real scale. Furthermore, extensive comparison of joints, in particular T-joints with closed profiles for selected types of fasteners, is provided. From a simple connection, screws and rivets or plain bonding to combined joints. These are assessed both in terms of bearing capacity and their deformation behavior. These tests are performed for two material combinations, FRP-FRP and FRP-steel.
|
|
|
hangar
Sejbalová, Kateřina ; Štrba, Michal (referee) ; Barnat, Jan (advisor)
The aim of this work is design and assessment of the steel structure of a two-aisle airport hangar for small aircrafts in Kunovice. Building has rectangular plan with dimensions 36 x 27 m. The main supporting systém is composed of truss girders, which are pinned on culumn. The distance between the truss girders is 9 m. For design was used the software Scia Engineer.
|
|
|
Airport Departure Hall
Čech, Ondřej ; Šmak, Milan (referee) ; Barnat, Jan (advisor)
The bachelor thesis deals with the design and assessment of steel load bearing structure of the departures hall of the airport. It is a purlin system consisting of sloping trusses of curved shape with overhangs that make up the awning above the entrance to the building. Truss to span 18 meters is welded from pipes. The steel used in the project is S355. For the design was used Scia Engineer software, in which was created a spatial model of the structure.
|
|
|
Static analysis of the roof structure
Dolníčková, Andrea ; Zídek, Rostislav (referee) ; Vlk, Zbyněk (advisor)
The thesis is focused on a static analysis of a roof truss with a steel purlin. It is a pitched roof of an L shaped groundplan. Computational model of the structure is carried out in the RFEM 5.07 software tool, which performes calculations using the Finite Element Method. There are 14 load cases applied on the model of the structure. The variable loads were determined according to ČSN EN 1991-1. The individual load-bearing elements are assessed for an ultimate as well as for a serviceability limit state. The assessments are processed by a hand calculation and verified by an assessment of the structure performed in the additional software modules RF-TIMBER Pro and RF-STEEL EC3. In the last part of the thesis there are some specific joints of the elements defined.
|
|
|
Roof over the Administration Buildings Forecourt
Baculak, Ladislav ; Pilgr, Milan (referee) ; Brosch, Petr (advisor)
Diploma thesis describes the design and assessment of the roof structure that covers the courtyard of office buildings. Structure has a regular floor plan and roof height is 15,0 m. The material if the structure is steel S355, bolts 8.8., steel of the pins is S355. Construction is located in Brno. Two options were produced and designed, evaluated according to the latest standards.
|
|
| |
|
|
Shopping centre entrance area
Čech, Ondřej ; Sýkora, Karel (referee) ; Brosch, Petr (advisor)
Diploma thesis describes the design and assessment of roof structure that covers entrance of the shopping center. Structure has an irregular floor plan and roof height is 16.5 m. The material of the structure is steel S355. The construction is located in Hradec Kralove. Two options were processed that were designed and evaluated according to applicable standards. The work also includes the design of anchoring and selected joints.
|
|
|
Solution of timber hall structures
Šigutová, Petra ; Hradil, Petr (referee) ; Zídek, Rostislav (advisor)
The subject of my thesis is a static analysis of a different trusses of a great span length. The preface is devoted to the trusses their creation of plane models of a girder with the extent of 18 metres. The questions of construction´s joints are mainly solid. The conclusion is dedicated to the creation of the girder and joints´ formation.
|
guest ::
