|
|
Competencies of General Meeting of limited liability company
Snížek, Martin ; Štenglová, Ivanka (advisor) ; Čech, Petr (referee)
Competencies of General Meeting of limited liability company The purpose of my thesis is to analyse competencies of a general meeting of a limited liability company, show different theoretical opinions and present my own ideas. I have chosen this topic because the limited liability company is the most common type of business entity in the Czech Republic and so I find this topic useful. The thesis is composed of Introduction, four chapters and Conclusion. Introduction defines aims and methods of this thesis. First general chapter is followed by three chapters, each of which dealing with different aspects of general meeting's competence. Chapter One is introductory and defines basic terminology used in the thesis. This chapter is subdivided into five parts. Part One describes the limited liability company and explains basic characteristics of this type of business entity set out by the Czech Commercial Code, No. 513/1991 Coll., as amended (hereinafter referred to as the ,,Commercial Code ). Part Two deals with the general meeting and it's position within the company. Part Three is concerned with powers of the general meeting and explains this term in general. Part Four is about members' decision making outside of the general meeting and Part five deals with some differences of decision making of a...
|
|
|
Competencies of General Meeting of limited liability company
Snížek, Martin ; Štenglová, Ivanka (advisor) ; Čech, Petr (referee)
Competencies of General Meeting of limited liability company The purpose of my thesis is to analyse competencies of a general meeting of a limited liability company, show different theoretical opinions and present my own ideas. I have chosen this topic because the limited liability company is the most common type of business entity in the Czech Republic and so I find this topic useful. The thesis is composed of Introduction, four chapters and Conclusion. Introduction defines aims and methods of this thesis. First general chapter is followed by three chapters, each of which dealing with different aspects of general meeting's competence. Chapter One is introductory and defines basic terminology used in the thesis. This chapter is subdivided into five parts. Part One describes the limited liability company and explains basic characteristics of this type of business entity set out by the Czech Commercial Code, No. 513/1991 Coll., as amended (hereinafter referred to as the ,,Commercial Code ). Part Two deals with the general meeting and it's position within the company. Part Three is concerned with powers of the general meeting and explains this term in general. Part Four is about members' decision making outside of the general meeting and Part five deals with some differences of decision making of a...
|
|
|
Modern web
Snížek, Martin ; Sklenák, Vilém (advisor) ; Gála, Libor (referee)
This master thesis shows which qualities should modern website have and which technologies should be used to achieve them. The thesis should mainly point out, what are the unwritten requirements of the websites nowadays and what the latest trends in this field are. It also mentions which components can be used when creating a website. In the theoretical part there is described the historical development of technical background of the web technology. The following section analyses current web platform development phase and all the new possibilities that are there for the developers and users both. The next part of the thesis shows what the requirements when creating modern websites are and which technologies can be used to fulfil them. In the practical part I am concentrating on developing a new website (from the design to the development, including testing and optimization) while using all of the modern technologies and trends in this field.
|
|
|
Strategies of French Car Manufacturers on International Markets
Snížek, Martin ; Machková, Hana (advisor) ; Malý, Josef (referee)
This diploma thesis aims at comparing strategies of French car manufacturers Renault and PSA Peugeot Citroën on international markets. The first chapter is focused on unveiling the particularities of different markets with paying special attention to distinguishing traditional automotive centres from emerging economies. The second part of the thesis presents Renault and its activities on international markets. Renault's activities are more profoundly studied through analysis of production (geographic distribution and its evolution, methods of entering new markets) and sales. The same structure is applied to the third chapter concerning PSA Peugeot Citroën. The author comes to a conclusion that even though France and Europe remain the main markets for both car makers their importance declines to the benefit of developing countries. Moreover, it was found out that both car manufacturers are entering new markets via cooperation with other car makers.
|
|
|
Web application for making of graphical invitations
Snížek, Martin ; Sklenák, Vilém (advisor) ; Vojíř, Stanislav (referee)
This bachelor thesis focuses on applications development and particularly on web applications development. It describes the whole process of application development. In the thesis, there are some suggestions of specific matter that should not be underesti-mated, or forgotten during such development of web applications. The main objective of the thesis is to develop a web application, which will allow the user to create graphical invitations. In the analytical part, there is defined who the target audience is and who will be using this application. There is also a preliminary analysis, which shows the interest of the target group in this application. There also needs to be considered, if the product has enough of benefits for the target audience as opposed to existing possibilities. Based on available data, there it is obvious that this application can be very helpful for potential users. Firstly, in the practical part of the thesis, there are defined the requirements that must be accomplished by the application. Also there is stated how the application should work to fulfil these requirements. The next part is focused on designing and developing the application. There are also described partial problems that were solved during the development. At the end there is a user test, which unveils any defects or insufficiently solved problems, therefore they could be fixed prior to releasing the application.
|
|
|
French Automotive Industry and Its Development Trends
Snížek, Martin ; Jiránková, Martina (advisor) ; Vondrušková, Barbora (referee)
The automotive industry has changed a lot in its history. Among the most important changes of the past few years is the shift in production toward developing countries, which is together with the current situation and trends in automotive industry the subject of the first chapter of this bachelor thesis. On the other hand, in developed countries the automotive-production-growth rate is slower or even negative. That is also the case of France, which is closer looked at in the second chapter. In addition, French economy faces a problem that home car manufacturers produce smaller and smaller share of their production in France. This issue is dealt with via analysis of the production of PSA Peugeot Citroën in the third chapter of the thesis. The author comes to a conclusion that except the shift in production in conformity with global changes the French car manufacturer tries to remain competitive by allocating its production to near European markets.
|
|
|
Designing the user interface of study information system VSE
Šromek, Jan ; Sigmund, Tomáš (advisor) ; Snížek, Martin (referee)
The main aim of this paper is to analyse the user interface of current school information system and to redesign new interface based on user testing results. The assumption for reaching this goal is the necessary knowledge of principles of designing modern user interfaces. The benefit consists in creating a whole new structure of navigation system and in the redesigning layouts. The beginning part of this work presents value of usability user interface and who is designing and testing it. The following part describes principles of modern user interfaces. Conclusion part of this paper presents a case study, which describes the problems of current user interface of the ISIS and the new solution of user interface ISIS and its navigation system.
|
|
|
Website optimization
Snížek, Martin ; Raška, Ondřej (advisor) ; Tichý, Jan (referee)
This work's topic is conversion rate optimization (CRO) -- activity, that leads to better business and website results, higher company income, through detailed knowledge of website visitors' behaviour and psychology and consecutive website adjustments. Conversion optimization's goal isn't getting more visitors to the website, it only focuses on unlocking maximum commercial potential of them -- orders, leads or other goals. The main purpose of this work is to summarize this newly developing topic complexly, as one of the first works in Czech, and demonstrating conversion rate optimization potential on a practical example. The work consists of following parts: - What is conversion rate optimization -- which disciplines and areas it comprises, the optimization process, pros and cons of optimization and redesign and more basic information on conversion rate optimization. - Some of conversion rate methods: * Multivariate and A/B testing -- what it is, how it is done, technological solutions, best practices. * Web analytics -- what it comprises, what functions it takes, what are the technological solutions and their pros and cons, web analytics implementation. * User testing -- how to do it properly. * Personas and user scenarios -- what they are and how to use them. - Case study about conversion optimization of the website Kentico.com -- utilization of described methods on a practical example including the results of optimization.
|
|
|
Tvorba obchodně úspěšného webu
Snížek, Martin ; Kacerovský, Jiří (advisor) ; Tichý, Jan (referee)
Tato práce popisuje postup při tvorbě webu, který by měl být obchodně úspěšný. Cílem je shromáždit a popsat všechny potřebné kroky pro vytvoření takového webu. Nejedná se však o přesnou metodiku, ale spíše o volný návod. Při konkrétním webovém projektu by měly být vybrány kroky a způsob jejich realizace, které jsou pro daný projekt relevantní a jejichž provádění přinese patřičný efekt. V této práci popisuji své znalosti, zkušenosti a postřehy, které jsem získal během působení ve firmě H1.cz. Popisovaný postup je zároveň postupem, který se i v této firmě pro projekty nového webu používá. Popisovaný postup i celá práce je rozdělena na části: Vstupní studie, Analýza, Návrh, Implementace, Kontrola a Provoz webu. Na začátku práce se navíc zabývám tím, co je vlastně obchodně úspěšný web, ke kterému má celý postup směřovat. Obsahem Vstupní studie je seznámení se s oborem, ve kterém bude web působit, a odhad velikosti poptávky a předpokládaných nákladů. Analýza se zabývá cíli webu, cílovou skupinou, konkurencí a již existujícím webem. V Návrhu jsou popsány stanovení strategie webu a návrh struktury, navigace a jednotlivých stránek a sekcí webu. V části Implementace a Kontrola jsou popsány možnosti kontroly kvality při implementaci webu. V části Provoz webu se nacházejí vybrané poznatky vztahující se k využívání webu, jeho správě, propagaci a řízení pomocí KPI.
|
guest ::
RSS feed.