National Repository of Grey Literature 29,387 records found  previous11 - 20nextend  jump to record: Search took 0.83 seconds. 

The current state and prospects for sustainable development of tourism in Slovakia.
Libantová, Silvia ; Indrová, Jarmila (advisor) ; Chaloupka, Radek (referee)
Tourism contributes to the prosperity of destinations by bringing financial resources, new jobs, a higher level of services and infrastructure development. However, if tourism does not develop sustainably, it is accompanied by negative factors, as well. Especially, negative impacts on the environment, such as: water and soil contamination, increased noise and overcrowded destination during the high season. As a response to the worsening state of the environment and possible irreversible changes caused by irresponsible human behavior, the idea of sustainable development is becoming more important. The theoretical part describes tourism in the Slovak Republic and highlights plans for sustainable tourism development. In the practical part, the results of the questionnaire, related to the awareness of sustainable tourism in the Slovak Republic, are evaluated. The main objective of this thesis is to evaluate the current situation in the field of sustainable tourism and to make suggestions for its future development.

Antibodies against sand flies saliva in domestic animals from endemic areas of visceral leishmaniasis
Košťálová, Tatiana ; Volf, Petr (advisor) ; Kopecký, Jan (referee)
The main aim of this thesis was to test sera of domestic animals from endemic areas of visceral leishmaniasis in north and northwest Ethiopia for antibodies against presumed vector P. orientalis salivary glands and to clarify behavior of the sand fly and the role of domestic animals in transmission of visceral leishmaniasis. Specific IgG antibodies against P. orientalis saliva were tested in dogs, cattle, goats, sheep and donkeys. Above the cut-off value there was 76 % analyzed dogs, 15 % cattle, 26 % goats, 60 % sheep and 45 % donkeys. Dogs, goats and donkeys revealed significantly higher anti-P. orientalis antibodies compared to control animals. In the case of cattle, goats and donkeys cut-off levels were very high and is questionable if observed results are relevant. Canine sera were screened also for anti-P. orientalis IgG2 and 88% of Ethiopean sera revealed significantly higher IgG2 than control sera. The next aim was to detect if canine sera from Ethiopia with anti-P. orientalis antibodies react with other bloodsucking insect saliva by using immunoblotting method. In saliva of sand fly Sergentomyia schwetzi, which is abundant in Ethiopia, canine sera reacted mostly with 36, 37 and 51 kDa proteins. Mosquito Culex quinquefasciatus is cosmopolitan species and canine sera most intensely...

A Comparison of Preconditioning Methods for Saddle Point Problems with an Application to Porous Media Flow Problems
Axelsson, Owe ; Blaheta, Radim ; Hasal, Martin
The paper overviews and compares some block preconditioners for the solution of saddle point systems, especially systems arising from the Brinkman model of porous media flow. The considered preconditioners involve different Schur complements as inverse free Schur complement in HSS (Hermitian - Skew Hermitian Splitting preconditioner), Schur complement to the velocity matrix and finally Schur complement to a regularization block in the augmented matrix preconditioner. The inverses appearing in most of the considered Schur complements are approximated by simple sparse approximation techniques as element-by-element and Frobenius norm minimization approaches. A special interest is devoted to problems involving various Darcy, Stokes and Brinkman flow regions, the efficiency of preconditioners in this case is demonstrated by some numerical experiments.

Micro-electromembrane extraction across multiple aqueous and organic phases for selective pretreatment of raw biological samples
Kubáň, Pavel ; Boček, Petr ; Seip, K. F. ; Gjelstad, A. ; Pedersen-Bjergaard, S.
Micro-electromembrane extraction (μ-EME) across multiple aqueous and organic\nsolutions was developed for selective extractions of various analytes from untreated\nbiological samples. The novel approach requires μL volumes of samples and organic\nsolvents, which form consecutive immiscible plugs in a transparent polymeric capillary\nand the extraction process is accelerated by application of d.c. voltage. Number of the\nplugs, their composition, volume and sequence in the extraction capillary can be chosen\nspecifically for each particular application and high variability and selectivity of the\nextraction process can be achieved. In this contribution, we demonstrate suitability of\na five-phase μ-EME system for simultaneous extractions of cations and anions from\nurine and for selective extractions of basic analytes based on their acid-base strength\nfrom plasma.

ELECTRON BEAM REMELTING OF PLASMA SPRAYED ALUMINA COATINGS
Matějíček, Jiří ; Veverka, J. ; Čížek, J. ; Kouřil, J.
Plasma sprayed alumina coatings find numerous applications in various fields, where they enhance the properties of the base material. Examples include thermal barriers, wear resistance, electrical insulation, and diffusion and corrosion barriers. A typical structure of plasma sprayed coatings, containing a multitude of voids and imperfectly bonded interfaces, gives them unique properties - particularly low thermal conductivity, high strain tolerance, etc. However, for certain applications such as permeation barriers or wear resistance, these voids may be detrimental.\nThis paper reports on the first experiments with remelting of plasma sprayed alumina coatings by electron beam technology, with the purpose of densifying the coatings and thereby eliminating the voids. Throughout the study, several parameters of the e-beam device were varied - beam current, traverse velocity and number of passes. The treated coatings were observed by light and electron microscopy and the thickness, structure and surface morphology of the remelted layer were determined and correlated with the process parameters. Based on the first series of experiments, the e-beam settings leading to dense and smooth remelted layer of sufficient thickness were obtained. In this layer, a change of phase composition and a marked increase in hardness were observed.\n

NUMERICAL SUPPORT FOR STUDY OF STRESS RATIO EFFECT ON FATIGUE CRACK BEHAVIOUR IN THREE POINT BEND SPECIMEN MADE FROM VIBRATED CONCRETE
Seitl, Stanislav ; Thienpont, T.
The fatigue behaviour of concrete has become more important for the design of structures due to more slender/slim structures, which are more sensitive to fatigue loading, or due to wind turbines, which are typically exposed to high-fatigue loading. The fatigue behaviour of concrete was investigated with respect to the influence of various stress ratios. Pilot analysis of fatigue crack propagation rate in three-point bend specimens made from ordinary vibrated concrete was done.

Sorption and Stabilization of Metals/Mettalloids by Innovative Synthesized Sorbent Amochar.
Ouředníček, P. ; Trakal, L. ; Komárek, M. ; Pohořelý, Michael
Remediation of contaminated soil which is based on stabilization and immobilization of potential\nhazardous substance by sorption materials has been studied intensively nowadays. Biochar – activated organic carbon belongs to this group of stabilizing agents which can adsorb wide range of contaminants, including metals/metalloids. Surface area of the biochars is quite large in general and functional groups (e.g. COO–) can form chelates or alkaline elements on the surface, which is represented by cation exchange capacity. Altogether with the high pH values (7.00 – 10.00), biochars are quite effective sorbents and can adsorb metals/metalloids from the solution (ground water), especially in acidic soils (in the environments affected by intensive mining activities). Sorption\neffectiveness can be increased (especially for As (V) or Cr (VI) sorption) by modification of biochar by various types of secondary oxides. Innovative sorbent AMOchar (AMO + biochar) has been synthesized currently. The product was prepared by adding of biochar to the reaction solution during amorphous manganese oxide (AMO) synthesis. The AMOchar was formed mainly by Mn-oxalates which had coated surface of the pristine biochar. AMOchar composite was able to remove significantly higher amounts of various metal(loid)s from the solution despite the rather high pH of the material. Sorption effectiveness was high not only in case of Pb (II) sorption (almost 99%), and Cd(II) (51.2%), but also a very high amount of As(V), 91.4%. Additionally, both AMOchar composite was able to reduce Mn leaching. This can avoid potential post-contamination caused by the dissolution of less stable Mn-oxalates as observed in the pure AMO.
Fulltext: content.csg - Download fulltextPDF
Plný tet: SKMBT_22316111113040 - Download fulltextPDF

Plasma spraying from liquids: plasma liquid interaction and coating build up
Tesař, Tomáš ; Mušálek, Radek ; Medřický, Jan ; Lukáč, František
Plasma spraying from liquid feedstocks is a rapidly developing field of thermal spraying since the coatings prepared from liquids exhibit some unique features, such as high hardness, thermal shock resistance or low thermal and electric conductivity. The key factor influencing the final coating character and properties is the input material which may be in the form of a suspension or a solution. Parameters of the selected suspension (solids concentration, viscosity, surface tension, chemical composition, etc.) or solution (concentration, etc.) determine its interaction with the plasma jet which strongly influences the coating buildup. This proceeding introduces the problematics of the interaction between the liquid feedstock material with the plasma jet and presents the way of evaluation of the coating buildup.

Determination of content substances for selected species and varieties of roses.
Slavíková, Eva ; Sus, Josef (advisor) ; Súkeníková, Tereza (referee)
This bachelor's work is focused on comparing the most significant content substance, vitamin C, in fruits of chosen rose kinds species and varieties. Herbal products are often seen by people as products of "second choice", when failure of allopathic treatment occurs, which is focused especially on suppressing symptoms of illness, but it ignores health of the human body as whole. That's why are herbal products often alternative for therapy of chronic diseases. The base of this work is extensive literary research and results of laboratory measurings. Literary part of this work includes description of botanical classification of rose plants. There is stated basic characteristic of individual rose species and their morphological features. In following chapters is composed overview of effective substances in rose fruits and their effect on human health. In practical part of this work are included results of laboratory tests for determining ascorbic acid content for chosen samples of rose species and it also includes results of weighing and measuring of fruit samples of chosen rose species. There are also stated chosen rose species and shortly their origin and description, in the beginning of practical part. For practical part were chosen samples of species. Results of practical part are compiled into statistic tables and graphs and it confirms high content of ascorbic acid in rose fruits. This content is in range of cca 300 - 900 mg.100 g-1. Due to growing interest in alternative treatment options and "clean" natural product, it can be assumed, that many plants of Rosaceae family will keep its place in treatment practice. Those plants will be used not only for treatment of acute and chronic diseases, but also for cosmetic products production, thanks to its large effects and process options.

Analysis breeding of milk cattle on the chosen biofarme
Plášková, Pavlína ; Toušová, Renata (advisor) ; Ducháček, Jaromír (referee)
The aim of this thesis is to evaluace the conditions of dairy cattle breeding in ecological agriculture and to compare them with concrete values taken from the chosen ecological farm Bílčice, which has been part of ecological agriculture since 2011 and which is focused on czech fleckvieh breeding and bio milk production. The first part deals with dairy cattle breed characteristic, main objectives and ecological agriculture principals, welfare problems, breed cattle and utility control, housing technology, nutrition and feeding, mechanical milking technology, milk production, reproduction, health condition and breeding economy. The practical part contains the rating of milk yield index (milk production, % proteins, % fat) and reproduction index ( meantime, perioda service, insemination index and after first parturition percentage). 650 pieces of cos were stabled at farm, from that 200 pices of dairy cos were mostly czech fleckvieh. Monitoring was made in 2013. Dayily milk production was around 2 750 kg. The milk utility for lactacion was in 2013 6 100 kg of milk, 3,89 % fat and 3,34 % proteins. The dairy cos were free stabled with high bedding, They were mechanically milked twice a day in herringbone parlours. Milk is being delivered once in twodays to Olma dairy. Cows are regularly driven out to pasture in summer feeding period. They are extra fed with 10 kg of clover silage and 6 kg of scarp (barely, wheat, triticale). Cows stays in stables for winter time. The ration consists of 45 kg of clover silage, 6 kg of scarp, 2 kg of lupine and 1 kg of corn in first time of lactacion. The cow utility in transitional form of economy at farm Bilcice was 7 477 kg of milk in 2010, a value in the Czech Republic was 7 726 kg of milk. After entering the ecological agriculture in 2013 milk yield at the farm decreased on 6 100 kg of milk and the average value in the Czech Republic increased to 8 370 kg of milk. The cow utility in transitional form was 4,03 % fat in 2010 and 3,89 % in 2013 (ecological agriculture). A diference between 2010 and 2013 is 0,14 %. Proteins were 3,39 % in 2010 and 3,34 % in 2013. There was average value for every reproduction index. The service period was 96 days and the meantime was 400 days, the insemination index was 1,8 and the after first parturition percentage was 54,2 %.