|
Arctic tundra dendrochronology
Lehejček, Jiří ; Svoboda, Miroslav (advisor) ; Monika, Monika (referee)
Historically unprecedented environmental change in the Arctic ecosystems is often given into the context of its past and possible future development. In the region where instrumental meteorological observations are scarce archives need to be investigated in order to address this issues. The comprehensive synthesis one of the archives: long-live circumpolar evergreen Juniperus communis L. shrub is presented here. 20 individuals from southwest Greenland were investigated at the cell anatomy level to understand the ecology of the species and unhide its potential for environmental and climate reconstructions. The findings are as follows:
i) Stop of exponential cross-sectional conduit-lumen widening with increasing age is in contrast with conduit-lumen nature of trees. This indicates that shrubs do not need to saturate their water and nutrient demands via traits of classical hydraulic conductivity law but rather developed different mechanisms. Extreme weather conditions result in prostrate growth form. However, different weather factors probably influence shrub growth differently: While snow and wind act mechanically (a), temperature influences the form of growth physiologically (b). a) So long as the young shrub stem has high resilience to bend back to an upright position after snow melt and so long as it can withstand the wind during the vegetation season it most likely grows upright and the conduit-lumens widen. b) Temperature, resp. freeze-thaw events are responsible for the shrubs preference of safety (finite size of conduit-lumens) over hydraulic efficiency, thus not allowing for more primary growth. All of these (and other) factors are apparently working together and the transition of vertical to more horizontal growth is gradual. As a consequence, the conduit-lumen sizes may not have to be further increased (due to ecophysiological restrictions possibly also must not) because water is no longer transported against gravity.
ii) Observed age/growth trend has to be taken into consideration for further employment of the wood anatomical parameter in paleoenvironmental studies. That is, shrub cell parameters can only be used for this purposes if correctly detrended. This allows for more accurate as well as longer reconstructions because youth trend was often neglected in reconstructions based on shrub annual-rings.
iii) The south-western Greenland Ice-Sheet (GrIS) melt rates reconstruction is presented for the whole 20th century. This part of GrIS is considered as the most active. According to the presented reconstruction current GrIS melt rates are not uncommon for the last century being comparable to first decades of 20th century. This finding is particularly important contribution to the debate on Atlantic meridional overturning circulation (AMOC). Too high fresh water inputs into the Northern Atlantic from GrIS melting may slow down or even stop the AMOC which would result in more continental climate in Europe. Presented results indicate that this threshold lies higher than observed current melt rates of GrIS.
Fascinating Juniperus comunnis species has shown to be able to address many ecological as well as environmental open questions and due to its longevity and abundant distribution has a great potential to become an important player in the Arctic research.
|
|
Nutritional analysis and optimization of breeding of selected species of edible insects under conditions of the Czech Republic with regard to human health
Adámková, Anna ; Kouřimská, Lenka (advisor)
All over the world, the edible insects are considered a highly nutritious food with high protein and fat content. However, the nutritional value of insect is not constant. It can be affected by species, developmental stage, rearing technology or nutrition.
Therefore, this thesis was aimed at obtaining the selected nutritional value of edible insects. Analyses were focused on the determination of the crude protein content, fat content, fatty acid profile and sterols in selected species of edible insects, which can be commonly reared in the Czech Republic. At the same time we also analysed samples of insects reared on the island of Sumatra to evaluate the influence of the climate on the nutritional value. The main aim of the thesis was the determination of optimal breeding conditions, developmental stages and feed rations for obtaining good production of insects with nutritional properties suitable for human nutrition. The analyses showed a high nutritional value of selected insect species, but also confirmed the significant differences in the content of individual nutrients between different species depending on the climate conditions and developmental stage. Comparing the fat and crude protein content in edible insects and other conventional sources of meat it has been found, that the examined insect is similar to beef concerning the fat and crude protein content. The results obtained are the basis for determining the appropriate rearing conditions and developmental stages for obtaining insect with the desired nutritional properties for human nutrition.
|
|
Information content in vocalization of guinea pigs (Cavia porcellus): individual distinction and recognition of predators
Baklová, Aneta ; Baranyiová, Eva (advisor) ; František, František (referee)
Guinea pigs represent domesticated precocious rodents which became common pets. From the first day after birth they are fully vocal. This thesis was devoted
to the vocalization of pups. The aim of the thesis was to 1) determine the age when the vocal individuality in whistle sound is demonstrable; 2) test possible ultrasonic signals emitted by young guinea pigs; 3) study the antipredator reactions and alarm calls to aerial (bird of prey) and terrestrial (dog) predators and human (control test).
A total of 16 guinea pig pups were tested for vocal individuality, 28 pups
for ultrasonic vocalization and 27 adolescents for predator recognition. When testing vocal ontogeny during the first 9 days after birth, I observed changes in temporal, frequency and parameter of intensity . When I test vocal individuality by cross-validated discriminant function analysis (DFA) based on ten acoustic parameters, calls were classified to correct animals with following success: day 1 = 71.9%, day 3 = 58.8%, day 5 = 53.10%, day 7 = 50.60% and day 9 = 63.10%. The highest frequency in whistle was 30.03 kHz. In predator discrimination reactions as freezing, fleeing and vigilance were observed. In the presence of dog, guinea pigs reacted for the longest time and most frequently by freezing. When confronted with a bird of prey, I observed for a longest time and most often fleeing and then freezing. When exposed to a human, guinea pigs showed mostly vigilance. Almost no vocalization was observed except for two events
of alarm calls - drrr as in the presence of dog and chirrup as reaction to bird of prey.
The following conclusions can be drawn from the presented results: 1) vocal individuality of guinea pigs is demonstrable immediately after birth and the rate
of individually different vocal parameters changes with age; 2) guinea pigs are able
to produce sound up to 30 kHz, i.e. within the ultrasound range, but signals of high frequencies are not crucial for their communication; 3) guinea pigs discriminate between terrestrial and aerial predators, but they emit alarm calls rather rarely.
|
|
Comparison of the Views and Attitudes of Pupils at Secondary Vocational Schools in the Field of Substance Abuse
Mazánková, Michaela ; Jirsáková, Jitka (advisor) ; Miroslava, Miroslava (referee)
Bachelor thesis entitled Comparison of the views and attitudes of pupils at secondary vocational schools in the field of substance abuse deals with a comparison of opinions and attitudes of pupils at secondary schools and vocational schools Obchodní akademie a Hotelová škola Havlíčkův Brod. The first part is devoted to general characteristics of risky behavior, causes of its origin, different types and prevention of risk behaviors . Analytical part is devoted to evaluation of the questionnaire and the results are compared opinions and attitudes of students of graduation schools and vocational schools, and point to the simultaneous occurrence of risk behavior studied in high school. Based on data evaluation are at the end of the work proposed specific preventive measures specifically for students of graduation schools and vocational schools.
|
|
Cooperation of high schools with external contractors in preparing school educational programs
Tulach, David ; Lačev, Alek (advisor) ; Hochel, Matej (referee)
This thesis, Cooperation of high schools with external contractors in preparing school educational programs, deals with the question whether it would be possible and beneficial for high schools to cooperate with companies on the preparation or modification of their educational programs, with the goal of improving the quality of education. After initial contributions from experts who provided negative replies to this question, the view was focused on the root of the issue - what are the historical pillars of public schools and pedagogy, what does science say about learning and teaching, how pedagogy reacts to the crisis of science. After comparing literal sources and results from interview with the experts, in combination with a trace and activity analysis, a theory was established that public education is reaching a point of crisis, has not changed in its essence since its beginning and that the best solution might be the establishment of alternative educational institutions.
|
|
(100) substrate processing optimization for fabrication of smooth boron doped epitaxial diamond layer by PE CVD
Mortet, Vincent ; Fekete, Ladislav ; Ashcheulov, Petr ; Taylor, Andrew ; Hubík, Pavel ; Trémouilles, D. ; Bedel-Pereira, E.
Boron doped diamond layers were grown in an SEKI AX5010 microwave plasma enhanced chemical vapour deposition system. Effect of surface preparation, i.e. polishing and O2/H2 plasma etching on epitaxial growth on type Ib (100) HPHT synthetic diamonds were investigated. Using optimized substrate preparation, smooth (RRMS ~ 1 nm) boron doped diamond layers with metallic conduction and free of un-epitaxial crystallites were grown with a relatively high growth rate of 3.7 μm/h. Diamond were characterized by optical microscopy, optical profilometry, atomic force microscopy and Hall effect.
|
| |
|
Optical frequency references
Hrabina, Jan
Optical frequency references based on absorption cells represent a traditional and essential tool for frequency locking of precise laser standards. One of the most often used absorption media is a molecular iodine 127I2, which offers a rich atlas of strong and narrow absorption lines across mostly whole visible part of optical spectrum. The main disadvatage of this media can be seen in its high corrosivity and sensitivity to presence of foreign substances. This contribution is oriented to comparison of possible measurement methods for bulk- and also optical fiber- based iodine absorption cells quality and chemical purity testing.\n\n
|
|
New Methods for Increasing Efficiency and Speed of Functional Verification
Zachariášová, Marcela ; Dohnal, Jan (referee) ; Steininger, Andreas (referee) ; Kotásek, Zdeněk (advisor)
Při vývoji současných číslicových systémů, např. vestavěných systému a počítačového hardware, je nutné hledat postupy, jak zvýšit jejich spolehlivost. Jednou z možností je zvyšování efektivity a rychlosti verifikačních procesů, které se provádějí v raných fázích návrhu. V této dizertační práci se pozornost věnuje verifikačnímu přístupu s názvem funkční verifikace. Je identifikováno několik výzev a problému týkajících se efektivity a rychlosti funkční verifikace a ty jsou následně řešeny v cílech dizertační práce. První cíl se zaměřuje na redukci simulačního času v průběhu verifikace komplexních systémů. Důvodem je, že simulace inherentně paralelního hardwarového systému trvá velmi dlouho v porovnání s během v skutečném hardware. Je proto navrhnuta optimalizační technika, která umisťuje verifikovaný systém do FPGA akcelerátoru, zatím co část verifikačního prostředí stále běží v simulaci. Tímto přemístěním je možné výrazně zredukovat simulační režii. Druhý cíl se zabývá ručně připravovanými verifikačními prostředími, která představují výrazné omezení ve verifikační produktivitě. Tato režie však není nutná, protože většina verifikačních prostředí má velice podobnou strukturu, jelikož využívají komponenty standardních verifikačních metodik. Tyto komponenty se jen upravují s ohledem na verifikovaný systém. Proto druhá optimalizační technika analyzuje popis systému na vyšší úrovni abstrakce a automatizuje tvorbu verifikačních prostředí tím, že je automaticky generuje z tohoto vysoko-úrovňového popisu. Třetí cíl zkoumá, jak je možné docílit úplnost verifikace pomocí inteligentní automatizace. Úplnost verifikace se typicky měří pomocí různých metrik pokrytí a verifikace je ukončena, když je dosažena právě vysoká úroveň pokrytí. Proto je navržena třetí optimalizační technika, která řídí generování vstupů pro verifikovaný systém tak, aby tyto vstupy aktivovali současně co nejvíc bodů pokrytí a aby byla rychlost konvergence k maximálnímu pokrytí co nejvyšší. Jako hlavní optimalizační prostředek se používá genetický algoritmus, který je přizpůsoben pro funkční verifikaci a jeho parametry jsou vyladěny pro tuto doménu. Běží na pozadí verifikačního procesu, analyzuje dosažené pokrytí a na základě toho dynamicky upravuje omezující podmínky pro generátor vstupů. Tyto podmínky jsou reprezentovány pravděpodobnostmi, které určují výběr vhodných hodnot ze vstupní domény. Čtvrtý cíl diskutuje, zda je možné znovu použít vstupy z funkční verifikace pro účely regresního testování a optimalizovat je tak, aby byla rychlost testování co nejvyšší. Ve funkční verifikaci je totiž běžné, že vstupy jsou značně redundantní, jelikož jsou produkovány generátorem. Pro regresní testy ale tato redundance není potřebná a proto může být eliminována. Zároveň je ale nutné dbát na to, aby úroveň pokrytí dosáhnutá optimalizovanou sadou byla stejná, jako u té původní. Čtvrtá optimalizační technika toto reflektuje a opět používá genetický algoritmus jako optimalizační prostředek. Tentokrát ale není integrován do procesu verifikace, ale je použit až po její ukončení. Velmi rychle odstraňuje redundanci z původní sady vstupů a výsledná doba simulace je tak značně optimalizována.
|
|
Acceleration of Object Detection Using Classifiers
Juránek, Roman ; Kälviäinen, Heikki (referee) ; Sojka, Eduard (referee) ; Zemčík, Pavel (advisor)
Detekce objektů v počítačovém vidění je složítá úloha. Velmi populární a rozšířená metoda pro detekci je využití statistických klasifikátorů a skenovacích oken. Pro učení kalsifikátorů se často používá algoritmus AdaBoost (nebo jeho modifikace), protože dosahuje vysoké úspěšnosti detekce, nízkého počtu chybných detekcí a je vhodný pro detekci v reálném čase. Implementaci detekce objektů je možné provést různými způsoby a lze využít vlastnosti konkrétní architektury, pro urychlení detekce. Pro akceleraci je možné využít grafické procesory, vícejádrové architektury, SIMD instrukce, nebo programovatelný hardware. Tato práce představuje metodu optimalizace, která vylepšuje výkon detekce objektů s ohledem na cenovou funkci zadanou uživatelem. Metoda rozděluje předem natrénovaný klasifikátor do několika různých implementací, tak aby celková cena klasifikace byla minimalizována. Metoda je verifikována na základním experimentu, kdy je klasifikátor rozdělen do předzpracovací jednotku v FPGA a do jednotky ve standardním PC.
|
guest ::
