| |
|
Developing open approach to mathematics in future primary school teachers
Samková, L. ; Tichá, Marie
In our contribution we focus on the possibility to develop open approach to mathematics in future primary school teachers during a university course on mathematics conducted in inquiry-based manner. We analyse data obtained in the beginning and in the end of the course with respect to two main aspects related to open approach to mathematics: searching for all solutions of a task, and acceptance of different forms of notation of a given solution. Data analysis revealed in the participants three different shifts towards open approach to mathematics, and showed that after the active participation in the course each of the participants improved at least in one of the monitored aspects, and that none of the participants got worse in any of the aspects.
|
|
Modelling, parameter estimation, optimisation and control of transport and reaction processes in bioreactors.
ŠTUMBAUER, Václav
With the significant potential of microalgae as a major biofuel source of the future, a considerable scientific attention is attracted towards the field of biotechnology and bioprocess engineering. Nevertheless the current photobioreactor (PBR) design methods are still too empirical. With this work I would like to promote the idea of designing a production system, such as a PBR, completely \emph{in silico}, thus allowing for the in silico optimization and optimal control determination. The thesis deals with the PBR modeling and simulation. It addresses two crucial issues in the current state-of-the-art PBR modeling. The first issue relevant to the deficiency of the currently available models - the incorrect or insufficient treatment of either the transport process modeling, the reaction modeling or the coupling between these two models. A correct treatment of both the transport and the reaction phenomena is proposed in the thesis - in the form of a unified modeling framework consisting of three interconnected parts - (i) the state system, (ii) the fluid-dynamic model and (iii) optimal control determination. The proposed model structure allows prediction of the PBR performance with respect to the modelled PBR size, geometry, operating conditions or a particular microalgae strain. The proposed unified modeling approach is applied to the case of the Couette-Taylor photobioreactor (CTBR) where it is used for the optimal control solution. The PBR represents a complex multiscale problem and especially in the case of the production scale systems, the associated computational costs are paramount. This is the second crucial issue addressed in the thesis. With respect to the computational complexity, the fluid dynamics simulation is the most costly part of the PBR simulation. To model the fluid flow with the classical CFD (Computational Fluid Dynamics) methods inside a production scale PBR leads to an enormous grid size. This usually requires a parallel implementation of the solver but in the parallelization of the classical methods lies another relevant issue - that of the amount of data the individual nodes must interchange with each other. The thesis addresses the performance relevant issues by proposing and evaluation alternative approaches to the fluid flow simulation. These approaches are more suitable to the parallel implementation than the classical methods because of their rather local character in comparison to the classical methods - namely the Lattice Boltzmann Method (LBM) for fluid flow, which is the primary focus of the thesis in this regard and alternatively also the discrete random walk based method (DRW). As the outcome of the thesis I have developed and validated a new Lagrangian general modeling approach to the transport and reaction processes in PBR - a framework based on the Lattice Boltzmann method (LBM) and the model of the Photosynthetic Factory (PSF) that models correctly the transport and reaction processes and their coupling. Further I have implemented a software prototype based on the proposed modeling approach and validated this prototype on the case of the Coutte-Taylor PBR. I have also demonstrated that the modeling approach has a significant potential from the computational costs point of view by implementing and validating the software prototype on the parallel architecture of CUDA (Compute Unified Device Architecture). The current parallel implementation is approximately 20 times faster than the unparallized one and decreases thus significantly the iteration cycle of the PBR design process.
|
|
Interpretive principles in Verdi's operas
Beneš, Andrej ; HAJÓSSYOVÁ, Magdaléna (advisor) ; VOTAVOVÁ, Yvona (referee)
The master’s thesis deals with the theme creation of the opera production of Giuseppe Verdi with the focus on his opera Falstaff and deals with significant important interpretations of this opera. This dissertation is supposed to bring a complete picture of Verdi’s opera production pointing out some details which are not commonly known nor from the public nor in the professional music world. What appears in this work is Verdi’s correspondence (letters). I consider these letters an authentic source to understand Verdi’s creative and artistic intentions. Hereafter I portray an idea of how to perceive opera Falstaff not only from my point of view but I used the lead from the Italian reviews and musicology.
|
|
Scream and Silence
Štefaňák, Ondřej ; NEBESKÝ, Jan (advisor) ; KORČÁK, Jakub (referee)
The work aims to examine the artistic expressionist tendency, manifested in expressionist drama and theater practice. In the first part, the author focuses on the origin and the direction of its general manifestations in arts and the historical context of expressionism. The author also attempts to highlight the features of expressionism in drama and contemplates the methods of expressionist artists in theater. In the second part, the author reflects his own experience of the production of an early expressionist text ''Spring’s Awakening''. He analyzes the text's dramaturgical potential and creates the basis for the theatrical production. He describes the creation of the staging as an audio-visual and scenic solution, where the particular focus is on the stylization of actors. Finally, the author tries to capture the essence of expressionism in a broader sense, as a peculiar way of expression for the artist.
|
|
Psychological specifics of teacher educating children with autistic disorders at a special scholl
Bílá, Nikola ; Šírová, Eva (advisor) ; Mertin, Václav (referee)
The theoretical part of the thesis concentrates at the begining on pedagogical profession in general with deeper focus on a repertoire of techers' activities. There are being charecterised mandatory personal presumptions and competences of teachers. In detail is elaborated the part about autism. The main part of the chapter constitutes of a review of psychological and medicinal aproach to this issue, diagnostical criteria and a overview of all the pervasive developmental disorders. The final part describes the possibilities of educating children with autism not just in the Czech republic but as well in other european countries. The empirical part of the thesis shows results of qualitative research focused on evaluation of psychological specifics of the work of teachers educating children with autism in the Czech republic from the point of view of the teachers and parents. The data were collected by observation, interview and analysis of documents. KEY WORDS Teacher, working competences, autism, educating children with autism.
|
|
Puppies and young dogs nutritions
Šabatová, Kateřina ; Hučko, Boris (advisor) ; Plachý, Vladimír (referee)
Puppies and young dogs nutritions Summary In this work I have attempted to summarize the most important aspects in nutrition of puppies and dogs in growth. The introduction describes the digestive tract and also the changes that have occurred due to domestication. Next is explained the importance of nutrition and water in nutritional requirements of a dog. Important are needs of nutrients and energy that are necessary to maintain the provision of the necessary vital functions. The basic components of food are proteins, saccharides, lipids, minerals and vitamins. I explain the necessary proportions, the amounts and the possible consequences of their lack in food. I focus on essential fatty acids, which in recent years are subject to frequent explorations and their pros and cons are not yet fully understood. I also mention ballast and significant specific active substances. Nutrition of pregnant and lactating females is often neglected, but for puppies it is a very crucial period. The influence of nutrition of pregnant females to the size and weight of newborn puppies has been proved. Further I deal with nutrition of puppies immediately after birth, I explain the composition of colostrum and its effect on the immunity system of the puppy. I also compare ratios of nutrients in the colostrum and milk. Further, I deal with the feeding of the individual at the time of weaning and in different growth periods. There are many possibilities of feeding puppies from after weaning until adulthood described in books. With the new knowledge about nutrition the ways of feeding our dogs have inevitably changed , but also the dogs' nutritional requirements have changed due to the conditions where and how they live and what their nutrient needs are according to their sport, breeding or other use. Currently, there is a possibility of a commercially produced complete nutritional diet or home-prepared fresh food - cooked or raw- barf. In the last chapter, I summarized possible aspects of malnutrition and its potential consequences. I described the most common problems associated with inadequate nutrition of growing dogs such as obesity as well as malnutrition, which also adversely affects the individual. The influence of proper nutrition of the puppy on its growth is clear. If we neglect the nutrition of the dog in the first two years of its life, the consequences are often irreversible.
|
|
Employment in a state-funded institution
Brožová, Milena ; Světlíková, Daniela (advisor) ; Pikola, Pavel (referee)
This bachelor thesis is focused on employment in a state-funded institution. It is divided into a theoretical and an empirical part.
The theoretical part deals with analysis of legal regulations and their interpretation. The method of description is used in this part. The focus in legal regulations is on the problems of a state-funded institution, namely on the legal position and functioning and on management. The focus is also on labour relations, from the general definition to the conclusion of employment for a fixed period of time. The analysis of legal regulations is complemented with interpretations of authors of specialized publications.
Direct and indirect quotations are used in the text and are marked with footnotes.
The empirical part of this thesis deals with the application of legal regulations in a particular state-funded institution. The order of researched areas is in accordance with the theoretical part. The method of comparison and study of documents and internal regulations are used for analysing the data.
The primary research has shown that the legal regulations are applied without difficulty. The discovered discrepancy between the used terminology and the terminology in the Civil code does not invalidate legal documents and thus there is no need to mark it as a defect which needs to be fixed. Suggestions for discussion have been made, for which measures were proposed in the concluding part. The suggestions relate to arrangement of employment for a fixed period of time and its change to permanent contract and to allowance from the founder as a financial mean of a state-funded institution.
|
| |
|
Retargetable Analysis of Machine Code
Křoustek, Jakub ; Janoušek, Jan (referee) ; Návrat,, Pavol (referee) ; Kolář, Dušan (advisor)
Analýza softwaru je metodologie, jejímž účelem je analyzovat chování daného programu. Jednotlivé metody této analýzy je možné využít i v dalších oborech, jako je zpětné inženýrství, migrace kódu apod. V této práci se zaměříme na analýzu strojového kódu, na zjištění nedostatků existujících metod a na návrh metod nových, které umožní rychlou a přesnou rekonfigurovatelnou analýzu kódu (tj. budou nezávislé na konkrétní cílové platformě). Zkoumány budou dva typy analýz - dynamická (tj. analýza za běhu aplikace) a statická (tj. analýza aplikace bez jejího spuštění). Přínos této práce v rámci dynamické analýzy je realizován jako rekonfigurovatelný ladicí nástroj a dále jako dva typy tzv. rekonfigurovatelného translátovaného simulátoru. Přínos v rámci statické analýzy spočívá v navržení a implementování rekonfigurovatelného zpětného překladače, který slouží pro transformaci strojového kódu zpět do vysokoúrovňové reprezentace. Všechny tyto nástroje jsou založeny na nových metodách navržených autorem této práce. Na základě experimentálních výsledků a ohlasů od uživatelů je možné usuzovat, že tyto nástroje jsou plně srovnatelné s existujícími (komerčními) nástroji a nezřídka dosahují i lepších výsledků.
|