National Repository of Grey Literature 22,779 records found  1 - 10nextend  jump to record: Search took 0.83 seconds. 

Development of Materials Science in Research and Education, Book of Abstracts of the 22nd Joint Seminar
Kožíšek, Zdeněk ; Nitsch, Karel
Topics: - Trends in development of materials research - Education of materials science at the universities - Information about the research programmes of individual institutions - Information on equipment for preparation and characterisation of materials - Results of materials science research

Evaluation and motivation in public administration
Vašíčková, Natálie ; Mitwallyová, Helena (advisor) ; Vláčil, Jan (referee)
The theme of the bachelor thesis is the evaluation and motivation of employees in public administration. The introductory part outlines the evaluation and motivation of employees on a general level, and then describes the specifics applicable for public administration. The practical part is focused on the evaluation and motivation systems used at selected institutions of public administration. It aims to assess these systems, suggest possible recommendations and find out whether the systems in use include modern management methods, such as evaluation interviews, competency models and regular system of employee evaluation as such. The research method consisted of interviews with human resources managers at selected institutions of public administration. Complementary information was obtained from materials created by these institutions themselves. All institutions of public administration are governed by Act No. 234/2014 Coll. on Civil Service, enshrining the evaluation of state employees. However, it depends on whether employees are evaluated formally, or if additional evaluation tools beyond the framework of the law are deployed, e.g. competency models. Officials of territorial authorities are subject to Act No. 312/2002 Coll., which does not explicitly define employee evaluation, yet employees are evaluated at many regional as well as local administration units. The results of the research survey confirmed that modern management methods are used in public administration and that the evaluation systems do not have any significant shortcomings.

The creation of videotutorials for the University of Economics, Prague
Zeman, Ondřej ; Šedivá, Zuzana (advisor) ; Kupec, Michael (referee)
The purpose of this bachelor thesis is to acquaint readers with new possibilities of teaching by using information technology and its application, when making learning material. The main outputs of this thesis are video tutorials, which serve as an education support for the course 4IT110 Use MS Excel in business practice taught in the University of Economics, Prague. However, it may be useful to other students of different courses. The process of making tutorials is described from the very beginning by specifying methodology, creating model exercises, subsequent testing of tutorials by students and optimisation of videos according to their suggestions and comments.

Expected development of Business Intelligence applications in the coming years
Aschmann, Jakub ; Pour, Jan (advisor) ; Fortinová, Jana (referee)
This thesis focuses on the development of Business Intelligence applications. The main area is the potential development in the coming years, history of business intelligence and individual components. To acquire the necessary knowledge, I studied educational materials and electronic publications. In Chapter 3 I focus on the definition of BI, in the following chapter I analyse individual components and the last chapter is dedicated to the development in the future. This thesis will provide comprehensive knowledge and trends in business intelligence to readers who are interested in this area and are looking for complex information.

STRAIN ENGINEERING OF THE ELECTRONIC STRUCTURE OF 2D MATERIALS
del Corro, Elena ; Peňa-Alvarez, M. ; Morales-García, A. ; Bouša, Milan ; Řáhová, Jaroslava ; Kavan, Ladislav ; Kalbáč, Martin ; Frank, Otakar
The research on graphene has attracted much attention since its first successful preparation in 2004. It possesses many unique properties, such as an extreme stiffness and strength, high electron mobility, ballistic transport even at room temperature, superior thermal conductivity and many others. The affection for graphene was followed swiftly by a keen interest in other two dimensional materials like transition metal dichalcogenides. As has been predicted and in part proven experimentally, the electronic properties of these materials can be modified by various means. The most common ones include covalent or non-covalent chemistry, electrochemical, gate or atomic doping, or quantum confinement. None of these methods has proven universal enough in terms of the devices' characteristics or scalability. However, another approach is known mechanical strain/stress, but experiments in that direction are scarce, in spite of their high promises.\nThe primary challenge consists in the understanding of the mechanical properties of 2D materials and in the ability to quantify the lattice deformation. Several techniques can be then used to apply strain to the specimens and thus to induce changes in their electronic structure. We will review their basic concepts and some of the examples so far documented experimentally and/or theoretically.

HYDROGEN ABSORPTION IN A-Co30Fe55B15
Čermák, Jiří ; Král, Lubomír ; Roupcová, Pavla
Hydrogen solved in amorphous alloys (AAs) influences their magnetic characteristics. AAs are also perspective\nas additives that can improve hydrogen storage kinetic in certain types of ball-milled hydrogen storage\nmaterials (HSMs). Therefore, knowledge of hydrogen solubility and hydrogen sorption kinetics in AAs are of a\ngreat importance for aimed design both AAs with optimal magnetic parameters and HSMs with desired sorption\ncharacteristics. In the present paper, amorphous alloy Co30Fe55B15 (an example of the type a-TM1xTM2y Bz ;\nTM - transition metal) was investigated. Hydrogen concentration c H was measured by Sieverts method in\ntemperature interval from T = 150 °C to T = 350 °C under hydrogen pressure p up to 6 MPa. It was found that\nc H was an increasing function of p and its maximum value was typically 0.5 wt.% H2 at 350 °C and 6 MPa.\nHowever, when the alloy was preliminary hydrogen charged (PHC), the pressure dependence of total c Htot in\nthe first absorption cycle(s) is non-monotonous in dependence on PHC conditions. For the sake of comparison,\nthe same absorption characteristics were measured also in Mg2Ni intermetallic that is a common constituent\nin Mg-based HSMs. Comparing Co30Fe55B15 and Mg2Ni, it was concluded that Co30Fe55B15 shows lower\nhydrogen solubility, but much better absorption kinetics.

Black Chromia Coatings on Metal Tubes for the Solar Collectors
Brožek, V. ; Mastný, L. ; Novák, M. ; Vilémová, Monika ; Kubatík, Tomáš František
This paper describes the results of the first phase of the study preparation, structure and properties of coatings modification of black chromium oxide on copper, aluminium, iron and zirconium tubes for solar collectors. The coatings are prepared by plasma spraying of liquid chromate method which is known as liquid precursor plasma spraying. Coatings have the function of an energy trap for thermal radiation wavelengths of 1 μm – 3 μm i.e. in the IR region. At the same time, the coating increases the corrosion resistance of metal substrates. The nanometric structure and thickness of the coating depend of the feeding distance and the concentration of chromate precursors. For the deposition of nanometric splats of melt chromiumIII oxide, a new type of feeder that injects precursors into the water stabilized thermal plasma produced by the WSP® generator has been\ndeveloped.\n

Cutting experiments with ASJ at 1500 bar
Zeleňák, Michal ; Foldyna, Josef ; Souček, Kamil ; Klichová, Dagmar
The aim of experimental work was to determine cutting condition maximal, middle and fine traverse speeds for selected materials and thicknesses. Materials were cut at pressure 1500 bars and 10% of suspension concentration. Secondary objective is long-term monitoring of nozzles wear using X – Ray CT tomography.

The Liberation of Pilsen 1945 in Photography
Křenová, Tereza ; SILVERIO, Robert (advisor) ; JANOŠČÍK, Václav (referee)
This bachelor thesis deals with liberation of Pilsen in May 1945 by american army in photography. The aim of this thesis is finding and collecting archival materials and placing them in a historical-political context. Communist regime changed the portrayal of historical events and directly influenced the amount of exisiting photographs, documents and lives of those who created them. Important part of this bachelor thesis is working with those archival materials – particularly with photographs capturing arrival of Americans and their stay in Czechoslovakia at the end of WW2. Both professional and amateur photographers created valuable photographs as they witnessed the liberation of Pilsen. These photographs became in spite of communist propaganda a clear evidence that Pilsen was liberated by american army.

Bob Krčil
Douša, Jan ; MOUCHA, Josef (advisor) ; Buddeus, Hana (referee)
The life and work of Bob Krčil have so far been known from fragments and unsubstantiated legends. The aim of this essayistic piece is to lay out the deeper motives of his personal trajectory, photographic oeuvre, and activities for the Czech exile community. Krčil’s photographic body of work is inseparably connected with his eventful life. The writing of the thesis was preceded by tracking down and putting together Krčil’s fragmented estate, sorting out his correspondence and writings, and interviewing people who knew him personally. By drawing on these materials, the thesis aims to provide insight into the life and motivations of this important figure of Czech exile culture.