| |
| |
|
Optimalization of material flow in automotive industry
Kolář, Tomáš ; Jirsák, Petr (advisor) ; Vinš, Marek (referee)
This master thesis is focussed on optimalization of material flow in an automotive company. First part introduce theoretical background. Automotive industry and its actual trends on global markets. Follows short introduction of the company where project of this thesis was executed. Main theoretical part describes concept of lean management, its tools in practical examples, but it is also focussed on philosophical approach to the work and mindset of the company. Follows the aplication part based on theoretical background. The whole project of this master thesis is focussed on specific area called PC store. At first this area is showed in context of overall material flow. Shortly there are introduced processes and areas where full material packaging flows. Follows deeper analysis and optimalization of PC store itself. There are three approaches of stock and lead time reduction applied. Last part shows the comparison of initial and future state including performed changes.
|
|
HYDROGEN ABSORPTION IN A-Co30Fe55B15
Čermák, Jiří ; Král, Lubomír ; Roupcová, Pavla
Hydrogen solved in amorphous alloys (AAs) influences their magnetic characteristics. AAs are also perspective\nas additives that can improve hydrogen storage kinetic in certain types of ball-milled hydrogen storage\nmaterials (HSMs). Therefore, knowledge of hydrogen solubility and hydrogen sorption kinetics in AAs are of a\ngreat importance for aimed design both AAs with optimal magnetic parameters and HSMs with desired sorption\ncharacteristics. In the present paper, amorphous alloy Co30Fe55B15 (an example of the type a-TM1xTM2y Bz ;\nTM - transition metal) was investigated. Hydrogen concentration c H was measured by Sieverts method in\ntemperature interval from T = 150 °C to T = 350 °C under hydrogen pressure p up to 6 MPa. It was found that\nc H was an increasing function of p and its maximum value was typically 0.5 wt.% H2 at 350 °C and 6 MPa.\nHowever, when the alloy was preliminary hydrogen charged (PHC), the pressure dependence of total c Htot in\nthe first absorption cycle(s) is non-monotonous in dependence on PHC conditions. For the sake of comparison,\nthe same absorption characteristics were measured also in Mg2Ni intermetallic that is a common constituent\nin Mg-based HSMs. Comparing Co30Fe55B15 and Mg2Ni, it was concluded that Co30Fe55B15 shows lower\nhydrogen solubility, but much better absorption kinetics.
|
| |
| |
|
Design of Experiment for Non-Stationary Processes of Production
Jadrná, Monika ; Macák, Tomáš (advisor)
The doctoral thesis is concerned with the services sector and the area of mass production. Particularly, the optimization of the product portfolio of the travel agency and the optimization of production rounds of ammunition.
The theoretical part deals with the current overview of discussed topic. Further, the terminology and methods of the decision-making process are defined to support decision making. The theoretical basis of research focused on the choice of appropriate input variables in the area of services, and on the choice of a particular material option in the production area and appropriate equipment for the production. The theoretical part forms the basis for the practical part of the thesis.
For the doctoral thesis was chosen an enterprise operating in the defined sector. Product portfolio for the services sector is optimised using Fuzzy logic and Fuzzy sets so that the enterprise can maintain its competitiveness in todays highly ambitious market. Product portfolio for manufacture is optimised for achieving desired properties of the product.
The main aim of the thesis is to propose a new methodological approach for the management of selected business processes in their nonstationary time course. The aim of the practical implementation is to verify the functionality of the proposed methodological approach, both in the area of services and in the field of mass production.
|
| |
| |
|
The impact of executing new thermal insulation on a apartment building on the expenses associated with its operation
Machová, Petra ; Kosová, Jaroslava (referee) ; Čech, Josef (advisor)
The topic of the diploma thesis „The impact of executing new thermal insulation on a apartment building on the expenses associated with its operation “ is a draft and appraisal of four variants of thermal insulation of the building. The thesis deals with the assessment of the current proposal for apartment building envelopes along with proposing alternative plans with emphasis on reducing heating costs. The first section describes the types of buildings according to heating demand and a list of different variants of thermal insulation materials. The second part is devoted to a specific apartment building in the Ústí nad Labem for which there are designed in four variants of insulation. The work includes thermal assessment in original condition and the assessment of new condition modified by adding thermal insulation. Through research will bedetermined price of implementation of proposed insulation options together with the costs of operation of the apartment building. In conclusion, the diploma thesis evaluates the payback period of insulation.
|