| |
|
Evaluation and motivation in public administration
Vašíčková, Natálie ; Mitwallyová, Helena (advisor) ; Vláčil, Jan (referee)
The theme of the bachelor thesis is the evaluation and motivation of employees in public administration. The introductory part outlines the evaluation and motivation of employees on a general level, and then describes the specifics applicable for public administration. The practical part is focused on the evaluation and motivation systems used at selected institutions of public administration. It aims to assess these systems, suggest possible recommendations and find out whether the systems in use include modern management methods, such as evaluation interviews, competency models and regular system of employee evaluation as such. The research method consisted of interviews with human resources managers at selected institutions of public administration. Complementary information was obtained from materials created by these institutions themselves. All institutions of public administration are governed by Act No. 234/2014 Coll. on Civil Service, enshrining the evaluation of state employees. However, it depends on whether employees are evaluated formally, or if additional evaluation tools beyond the framework of the law are deployed, e.g. competency models. Officials of territorial authorities are subject to Act No. 312/2002 Coll., which does not explicitly define employee evaluation, yet employees are evaluated at many regional as well as local administration units. The results of the research survey confirmed that modern management methods are used in public administration and that the evaluation systems do not have any significant shortcomings.
|
|
Description of the older school age boys dental injuries in České Budějovice region and proposal of the health education materials.
TOBOLKOVÁ, Andrea
Thesis deals with the problem of the older school age boys dental injuries in České Budějovice region. The injury means: ?sudden damage of the health by effect of external factors which exceed adaptation options of the human body?. In the sphere of dental injuries the children is the most jeopardized group of population. The most often reason for the children injuries is their imperfect stability. In case of older children and young people there are injuries mostly caused by sport. Teoretical part of my thesis is focused on definition of older school age as well as on anatomy and teeth physiology. The part of thesis also is the enumeration of dental injuries and its treatment. I also mention prosthetic dentistry and the influence of accidents on individual physical and mental health. At the end of teoretical part there is mentioned process of the injured examination, posttraumatic dental hygiene and patient nutrition after teeth accident. Research part finds with the help of questionnaire survey the kinds of dental accidents, circumstances of injuries formation and the influence of accidents on individual physical and mental health in specific age category. The questionnaire survey was evaluated and processed in grafical part of thesis. The part of thesis also is health and educational material which helps to rise the quality of dental hygiene and also contributes to the prevention of dental accidents formation of second degree students at primary schools.
|
|
Small mammals in diet of barn owl in the Eastern Meditarranean
Šindelář, Jiří ; Horáček, Ivan (advisor) ; Anděra, Miloš (referee)
The extensive material of skeletal remains of mammals from a diet of barn owl in the eastern Mediterranean has been processed and evaluated with different techniques of chorological and morphometric analysis. At least 8400 individuals of 45 species of insectivores, rodents and bats were found in our total collection of samples, which represents a significant portion of fauna of the region. We have evaluated a chorological composition of the taphocoenoses and the interregional differences, manifested primarily by differences in the representation of satellite and accessory elements. We found a highly significant impoverishment of the isolated island taphocenoses (Cyprus, Karpathos, partly on Crete), where Cricetidae, Arvicolidae, C. leucodon etc. are missing. On the other hand the essential part of the dominance structure takes up the Rattus rattus, which acts here as an invasive species, significantly more successful than in the ragged continental contexts. The species diversity of the examined samples is positively correlated with the geographic latitude (taphocenoses of the northern regions are significantly richer) and negatively with the island effect and the degree of aridization. The morphometric analysis of the three most abundant species of Soricidae within the studied region showed...
|
|
Anti-Plague texts in the late Middle Ages and the Early modern period.
PAMPUSCHOVÁ, Marie
The theme of this work are late medieval and early modern time anti-plague treatises and official regulations against plague. In times when many countries and even continents were affected by plague, many city councils and rulers themself had the treatises printed in order to reduce the risk of transmission of the infection and development of the illness. The treatises adjusted regulations of towns and villages. These official decrees against plague were supplemented with plague treatises that were written for inhabitants of towns affected by black death. Many of them were written in Latin and therefore incomprehensible to uneducated people. It changed when a doctor Jan Černý wrote such a treatise in Czech language. The treatises advised not only how to prevent plague but also how to treat it. I divided my work into two parts. In the first part I describe particular plague epidemics that took place especially in Bohemia and Moravia. I progressed chronologically from antiquity to the 18th century and described whole course of epidemics in various regions. In the second part I focused mainly on different ways how these treatises deal with prevention and treatment of the disease. I made a comparison of various plague treatises from Prague, České Budějovice and Nepomuk. In order to gather data and informations I focused on historical sources and literature that give us informations from people who had first-hand experience of plague. I do the overall comparison and critique of these sources in seperate chapter. I believe this work can work as an educational material for students and teacher
|
| |
| |
|
HYDROGENATION PROPERTIES OF BALL-MILLED Mg-Ti-C-Zr COMPOSITE
Král, Lubomír ; Čermák, Jiří ; Roupcová, Pavla
The hydrogen storage properties of ball-milled Mg-Ti-Zr-C composite (1.8 wt.% Ti, 1.9 wt.% Zr and 0.2 wt.% C) were investigated. It has been previously shown, that the addition of Ti, Zr and C improved its storage properties. This beneficial effect of additives upon hydrogen storage properties can be explained by catalysis by the particles rich in Ti or Zr located on the surface of Mg grains. They provide effective pathways for the hydrogen diffusion into the MgH2. The morphological and microstructural characteristics were investigated by scanning electron microscopy and by X-ray diffraction. The hydrogen sorption was measured by Sieverts method using Setaram PCT-Pro device. In this paper, sorption behaviour of the composite after ball-milling and after aging on the air was compared. The ball-milled composite adsorbed 3.5 wt.% H2 within 10 min at 623 K. However, hydrogen storage capacity of the composite aged on the air for 7 months remarkably decreased: The aged composite adsorbed within 10 min only 2 wt.% H2 at 623 K and the sorption capacity decreased from 4.7 wt.% H2 to 2.1 wt.% H2.
|
|
INFLUENCE OF LASER CUTTING AND PUNCHING ON MAGNETIC PROPERTIES\nOF ELECTRICAL STEEL M470-50A
Bulín, Tomáš ; Švábenská, Eva ; Hapla, Miroslav ; Ondrůšek, Č. ; Schneeweiss, Oldřich
Electrical steel M470-50A belongs to the most often used materials in electrical machines. Due to this fact, it is desirable to know the magnetic parameters after processing raw sheets into the required shape. Basic parameters of mechanical, electrical, and magnetic properties of the sheets are usually obtained from the producer but the magnetic properties are changing in dependence on additional machining processes. The aim of this study is to describe changes in parameters of magnetic behavior after punching, laser and spark cutting of the original sheets. The basic information of structure was obtained by optical and scanning electron microscopy. The magnetic parameters were acquired from the measuring of magnetic hysteresis loops in dependence on saturation fields and frequencies. The results are discussed from the point of view of applied\ncutting technology with the aim to obtain the best magnetic parameters and consequently a higher efficiency of the final product. Results can be used as input parameters in simulation of the electrical machine.
|
|
STRAIN ENGINEERING OF THE ELECTRONIC STRUCTURE OF 2D MATERIALS
del Corro, Elena ; Peňa-Alvarez, M. ; Morales-García, A. ; Bouša, Milan ; Řáhová, Jaroslava ; Kavan, Ladislav ; Kalbáč, Martin ; Frank, Otakar
The research on graphene has attracted much attention since its first successful preparation in 2004. It possesses many unique properties, such as an extreme stiffness and strength, high electron mobility, ballistic transport even at room temperature, superior thermal conductivity and many others. The affection for graphene was followed swiftly by a keen interest in other two dimensional materials like transition metal dichalcogenides. As has been predicted and in part proven experimentally, the electronic properties of these materials can be modified by various means. The most common ones include covalent or non-covalent chemistry, electrochemical, gate or atomic doping, or quantum confinement. None of these methods has proven universal enough in terms of the devices' characteristics or scalability. However, another approach is known mechanical strain/stress, but experiments in that direction are scarce, in spite of their high promises.\nThe primary challenge consists in the understanding of the mechanical properties of 2D materials and in the ability to quantify the lattice deformation. Several techniques can be then used to apply strain to the specimens and thus to induce changes in their electronic structure. We will review their basic concepts and some of the examples so far documented experimentally and/or theoretically.
|
guest ::
