| |
|
Volumetric model of human vocal folds
Vampola, T. ; Horáček, Jaromír
The article describes the vollumetric 3D FE model of real human vocal folds in a defined phonation position. The model was developed from the CT images of the plaster casts obtained by a special procedure during experiments with the excised human larynges, when the phonatioon caused by the airflow was suddenly stopped without changing the position of the fixed larynx. The model is determined for studies of dynamical stresses in the vocal fold tissue during vocal folds collisions.
|
|
Computational analysis of the dynamic behavior of the thrust bearings
Žatko, Miroslav ; Kos, Pavel (referee) ; Malenovský, Eduard (advisor)
This master´s thesis solves the problem of stationary viscous flow of incompressible fluids in thin layers of fluid film lubrication in fixed pad thrust bearings. The parametric computational model of oil domain was created for investigation the distribution of pressure, velocity and thermal fields together with the determination of the basic parameters as axial force, heating up and friction loss. Subsequently this model was applied for investigation influence of uneven bearing clearance. The problem task was solved by final volume method in Ansys CFX 12.0 software.
|
| |
|
Automatic equipment for production of ceramic molds
Rouš, Jaroslav ; Kožďál, Lubor (referee) ; Bradáč, František (advisor)
The theme of this thesis is the engineering design of the automaton for the ceramic moulds production for the shell casting technology. In the first part of the thesis I occupy with the design of the mechanical part of the machine including the kinematic, dynamic and strength calculations of the chosen engineering compositions and components. In the next part of the thesis I design the control part of the machine.
|
| |
|
Ion attachment and ion emission of dust grains
Vyšinka, Marek ; Němeček, Zdeněk (advisor) ; Wild, Jan (referee)
Small dust grains could be found in many environments. Because of their size, their charge and the electric forces acting on them play an important role in their dynamics. The dust grain charge is influenced by many different processes. Among other methods, charging processes can be studied by trapping a single dust grain inside an electrodynamic quadrupole where it is put into specific environment (ion or electron beam, UV radiation). The progress of the charging process can be inferred from the changes in the grain charge. Our work contributed to the building of a new laboratory set-up for study of the charging processes. Specifically, a new Faraday cup for measurements and stabilization of the ion and electron gun currents is designed and its function verified. It solves the shortcomings of the previously used Faraday cups. Further, an amplifier for the ion gun current measurement is designed and constructed along with the design of digital stabilization of the current. The stabilization is neccesary for the interpretation of measurement results and its digitalization will allow more flexible adjustment and easier connection with the control computer. Finally, data acquired during the charging of dust grain with different ion species are evaluated in order to study the effect of different ions on surface...
|
|
Dynamic Characteristics of Exhaust System and Noise Transmition to the Car Cocpit
Novotný, Václav ; Ramík, Pavel (referee) ; Svída, David (advisor)
This thesis deals with the complex analysis of dynamic characteristics of the exhaust system and the transmission of noise from exhaust system to the vehicle. In the first part is performed modal analysis, which is compared to experimentally measured data. Modal analysis of the complete exhaust system is made with focusing on the influence of temperature of the exhaust system. There is also performed an analysis of noise transmission from exhaust system to the car cockpit.
|
|
Method of measurement parameters in metal forming.
Knebl, Martin ; Šlais, Miroslav (referee) ; Forejt, Milan (advisor)
This master’s thesis deals with the problem of measurement for thermomechanical parameters during metal forming under higher deformation rate. The first part works up general literary studies, comprising a summary of measurement methods for required parameters. There is described a principle of their function and usage. Further assessed the current situation and recommendation of appropriate methods for the dynamic processes of forming, especially their testing. The second part is devoted to the measurement for dynamic features of the material. This is a problem specified by Split Hopkinson preassure bar test. The test is described, including the mathematical evaluation process, in the theoretical part. In the practical part, there is a detailed description of the process and evaluation of the real test with aluminum alloy AlMg4, 5Mn ,07-EN AW 5083 performed within the framework of the junior project.
|
|
Phase-correlation based image registration
Druckmüllerová, Hana ; Martišek, Dalibor (referee) ; Procházková, Jana (advisor)
Tato práce se zabývá použitím fázové korelace k určení vzájemné rotace, změny měřítka a posunu mezi digitálními obrazy. Fázová korelace je založena na Fourierově transformaci, proto je popsána Fourierova transformace funkcí definovaných na R^2 i diskrétní Fourierova transformace funkcí definovaných na konečném počtu bodů {0, 1, ... , N-1}^2, kde N je přirozené číslo. Dále je pozornost věnována modifikacím fázové korelace, díky nimž metoda umožňuje nalezení parametrů podobnostní transformace i mezi obrazy, které mají vysoký dynamický rozsah a slabě patrné struktury, obsahují aditivní nebo impulzní šum a jsou pořízeny pomocí různých snímačů a optických soustav. Obsahem práce jsou i modifikace metody pro snímky sluneční koróny pořízené během úplných zatmění Slunce, což patří mezi nejobtížnější úlohy registrace obrazů.
|
guest ::
