|
Optical infrastructure for time and frequency transfer
Smotlacha, V. ; Vojtěch, J. ; Kuna, Alexander
The paper describes optical infrastructure for time and frequency transfer in the Czech republic. The infrastructure is heterogeneous and utilises resources of the Czech academic optical network. It allows to interconnect Cesium standards in distant sites with the national time and frequency laboratory and to distribute accurate time and stable frequency. We also present results and compare them with other methods of time transfer
|
|
Use of distribution of tasks in construction company
Repoň, Patrik ; Fábry, Jan (advisor) ; Skočdopolová, Veronika (referee)
Bachelor thesis deals with distribution of tasks, which have utility in the construction company. The aim is to apply these distribution of tasks to problems with which the construction company often meets, and to reach an acceptable solution that will help to streamline production, save working time or financial recourses. Bachelor thesis is divided into two parts. The first part is a theoretical part, which presents problems in construction companies in general, as well as the application of different types of distribution of tasks. Furthermore, we face mathematical models of these tasks and with description of optimization software LINGO, which we will use to resolve them. In the practical part the distribution of tasks are applied to concrete problems and real data. The final part contains an overall assessment of the results.
|
|
Clustering and regression analysis of micro panel data
Sobíšek, Lukáš ; Pecáková, Iva (advisor) ; Komárek, Arnošt (referee) ; Brabec, Marek (referee)
The main purpose of panel studies is to analyze changes in values of studied variables over time. In micro panel research, a large number of elements are periodically observed within the relatively short time period of just a few years. Moreover, the number of repeated measurements is small. This dissertation deals with contemporary approaches to the regression and the clustering analysis of micro panel data. One of the approaches to the micro panel analysis is to use multivariate statistical models originally designed for crosssectional data and modify them in order to take into account the within-subject correlation. The thesis summarizes available tools for the regression analysis of micro panel data. The known and currently used linear mixed effects models for a normally distributed dependent variable are recapitulated. Besides that, new approaches for analysis of a response variable with other than normal distribution are presented. These approaches include the generalized marginal linear model, the generalized linear mixed effects model and the Bayesian modelling approach. In addition to describing the aforementioned models, the paper also includes a brief overview of their implementation in the R software. The difficulty with the regression models adjusted for micro panel data is the ambiguity of their parameters estimation. This thesis proposes a way to improve the estimations through the cluster analysis. For this reason, the thesis also contains a description of methods of the cluster analysis of micro panel data. Because supply of the methods is limited, the main goal of this paper is to devise its own two-step approach for clustering micro panel data. In the first step, the panel data are transformed into a static form using a set of proposed characteristics of dynamics. These characteristics represent different features of time course of the observed variables. In the second step, the elements are clustered by conventional spatial clustering techniques (agglomerative clustering and the C-means partitioning). The clustering is based on a dissimilarity matrix of the values of clustering variables calculated in the first step. Another goal of this paper is to find out whether the suggested procedure leads to an improvement in quality of the regression models for this type of data. By means of a simulation study, the procedure drafted herein is compared to the procedure applied in the kml package of the R software, as well as to the clustering characteristics proposed by Urso (2004). The simulation study demonstrated better results of the proposed combination of clustering variables as compared to the other combinations currently used. A corresponding script written in the R-language represents another benefit of this paper. It is available on the attached CD and it can be used for analyses of readers own micro panel data.
|
|
Heat treatment processes optimalization of ADI with graded Ni content
Klimentová, Jiřina ; Stránský, Karel (referee) ; Pavloušková, Zina (advisor)
This work is focused on segregation processes in the matrix of spheroidal graphite cast iron with different silicon and nickel content during heat treatment. The aim of this work is to trace the redistribution of the elements of interest during homogenization annealing with different dwell time by comparison of the effective distribution coefficients. Comparison of some specific properties and description of structure development of spheroidal graphite cast iron matrix from initial state to the state after ferritization and homogenization annealing is included in this work.
|
|
Study of properties of electrolytically modified NaCl solutions.
Brázda, Lukáš ; Mika, Otakar Jiří (referee) ; Mašek, Ivan (advisor)
This work concentrates on the study of properties of NaCl solutions, prepared by electrolysis and their using for disinfection of water. Then it is focused on reporting on possibality for corrosin of metals, whice are used in water distribution. For study was used 0,25 mol/l, 0,1 mol/l, 0,05 mol/l NaCl solutions and input direct-current voltage for electrolysis was 6V a 12 V. During the electrolysis pH and conducitivity were measured. After the end of electrolysis free active chlorine and chlorides were determined on the time. For electrolysis was used diaphragm.
|
| |
|
Proudění kolem profilu v kanále s dynamickými účinky
Fürst, J. ; Honzátko, R. ; Horáček, Jaromír ; Kozel, K.
The work deals with a numerical solution of steady and unsteady 2D inviscid incompressible flow over the profile NACA 0012 in a channel. The flow is described by the system of Euler equations. Cell-centered finite-volume scheme at quadrilateral C-mesh is used. Steady state solutions and also unsteady flows caused by the prescribed oscillations of the profile were computed. The method of artificial compressibility and the time dependent method are used for computation of the steady state solution.
|
|
Reconstruction of the phonological system of contemporary Polish language with an accent on the vocalic system
Vacula, Richard ; Balowski, Mieczyslaw (advisor) ; Rusin Dybalska, Renata (referee)
Polish is a language with a prevailing consonantism. Its vocalic system has been relatively stable. It has been characteristic by an oral and a two-vowels nasal subsystems. It also missed the diphthongs (except a small number of foreign expressions and some vocalic structures with the glide Ij/ which however haven't been considered as diphthongs). The new diphthongs or diphthongoids can be created in in two or three diffrent ways. Oral diphthongs are made from the connection of a vowel with an etymological dental ly (I) owing to the progressive vocalisation ofthis lateralliquid into the glide Iw/. Nasal diphthongs are the continuants of either the primitive nasal vowels or the structures oral vowel + nasal consonant, in the both cases before aspirante. The glide Iwl originates in a Proto-Slavonic non-palatalised /ll, which has changed during its evolution into a dental ly (I) with labialisation and has been progressively vocalised after the decline ofthe functional correlation with the "soft" lPI. That change regards almost the whole polish territory today. However, the phoneme Iwl can appear not only in diphthong structures but also in some other positions (in neamess ofthe consonants). This phonotactic distribution distinguishes it from the other Polish glide Ij/ and in the same time assimilates it into...
|
|
Unsteadiness in sprays of effervescent atomizers
Beinstein, Zbyněk ; Volavý, Jaroslav (referee) ; Jedelský, Jan (advisor)
Master thesis focused on the research of the effervescent atomizers. Effervescent atomizers belong to a group of two-phase atomizers, which are often used in combustion applications. Right there in combustion applications, the degree of the stability sprays has a significant impact on combustion efficiency and exhaust gas emissions. The main aim of this work was to asses the level of spray unsteadiness depending on the atomizer design and its operating mode. The effect of construction was studied on the diameter and length of mixing chamber, and then on the size, number and location of aeration holes. Seventeen specific variants of the atomizer were constructed by different combinations of these design parameters. Each of these variants was measured in three operating modes, which were represented by a liquid pressure at the inlet to the atomizer and gas-to-liquid mass flow ratio (GLR). To evaluate the level of spray unsteadiness was used a methodology, which compares the ideal element´s distribution into the interparticle time bin, defined for the ideal (stable) spray, with the experimentally observed distribution. The laser measurement system P/DPA (Phase Doppler Particle Analyzer) was used to determine the experimental interparticle distribution. The result of the comparison of the ideal and the experimental distribution was the parameter , which expresses the level of spray unsteadiness for a specific atomizer and operating mode. With that parameter it was possible to compare the individual atomizers and determinate to the benefit of various construction´s correction of the atomizer. The results showed the recommendation for the modifications of the atomizer, creating a spray with a minimum level of spray´s unsteadiness. For the surveyed atomizer and his individual costruction´s variations the drawing was made.
|
|
Deposition and analysis of DLC thin films
Rudolf, Miroslav ; Čech, Vladimír (referee) ; Šikola, Tomáš (advisor)
Diplomová práce nastiňuje problémy spojené s výrobou a analýzou tenkých vrstev DLC:H. Tyto vrstvy jsou ve středu zájmu mnoha vědeckých pracovníků již po několik desetiletí. V současné době existuje mnoho technik pro přípravu a analýzu. Příprava DLC vrstev má zásadní vliv na jejich vlastnosti a možnosti použití. Je zde mnoho kritérií jak vrstvy posuzovat. V této práci jsou studovány vlastnosti DLC:H vrstev připravených na substrát krystalického křemíku metodou RF-PECVD a následně jsou studovány mechanické, tribologické a optické vlastnosti. Jsou zde využity techniky jako XPS, Ramanova spektroskopie, reflektometrie, měření tvrdosti a adheze. Část práce se zabývá modelováním DLC z prvních principů. Pro tento účel je využito prvoprincipiálního programu Abinit který je šířen pod GPL. Je studována otázka přípravy vstupních dat s ohledem na konvergenci výsledků. Pozornost je také věnována výpočtu vibračních spekter ve středu Brillouinovy zóny ( bod) a celkové hustotě elektronových stavů clusteru DLC v supercele tvaru krychle. Tyto výsledky mohou být porovnány s experimentálně získanými daty z Ramanovy spektroskopie, respektive z XPS spektra valenčního pásu
|
guest ::
