|
Possible way to prepare nanoparticles from aerosols released at plasma deposition
Brožek, Vlastimil ; Mastný, L. ; Moravec, Pavel ; Ždímal, Vladimír
During plasma deposition of powdered metals or inorganic compounds using WSP® generator, they interact with the plasma having temperature between 25000 and 30000 K. As a result, they melt, evaporate, thermally decompose, get ionized and/or react chemically both with plasma-forming medium and with the surrounding atmosphere or carrier gas. An experimental apparatus was constructed enabling us to capture aerosol particles emitted from the surface of the free flying particles (FFP) heated in a stream of plasma. In this work we studied content, composition and size distribution of nanosized particles of Ag and oxides of Al, Ti, Cr and W, released during plasma deposition process. These particles were analyzed by dynamic light scattering - photon correlation spectroscopy using instrument MALVERN, and with aerosol spectrometers SMPS 3936 and APS 3321.Concentration of aerosols containing nanoparticles of silver or metal oxides with diameters below 100 nm was found to be in the range 85 to
|
|
Comparison of methods of ECLIA and ELISA in determining the beta-CrossLaps
KOŽANTOVÁ, Jana
Osteoporosis is a very old disease affecting a large majority of population. Its occurrence rate has been growing permanently. It is a systemic disease of bones for which the decrease in bone mass, i.e. of inorganic as well as organic bone part is characteristic. Typical symptoms are osteoporotic fractures. To perform an in time diagnostics of the disease, it is necessary to execute the necessary examinations. One of them is also the laboratory determination of markers of bone resorption and new creation for finding out the state of bone metabolism. The target of my bachelor thesis was to find out the level of the bone resorption marker (beta-CrossLaps) by means of ELISA and ECLIA methods on the same serum from patients with the diagnosed osteoporosis and to process statistically the results. In the next part I dealt with the structure and functions of bones. Then I focused on markers of bone formation and resorption. Finally I mentioned the bone metabolism and its control mechanisms. I concentrated mainly on the metabolism of calcium, D vitamin, parathormone and calcitonin. I carried out the practical part of my bachelor's thesis in the accredited private laboratory STAFILA, spol. s r. o. in České Budějovice. The procedure of my work followed the standard operating procedure of the laboratory. In the research, in total 66 serums of patients with osteoporosis were analysed by me. At first, I determined the concentration by beta-CrossLaps method based on the principle of sandwich ELISA on the appliance NexGen Four from TestLine company. Then I analysed the same samples on the automatic analyser IDS-iSYS from IDS company, this time by ECLIA method. Both appliances on which the determination was executed, principles of both methods, applied analytic sets and the procedures of analysis are described in the methodical part. In the next part of my bachelor's thesis, the results of my measuring are stated. At first I entered the concentrations beta-CrossLaps in ng/ml measured by both methods into the table and for the respective samples I stated the sex and years of birth of individual patients. Moreover I prepared a graph illustrating the share of men and women of various age categories in my research. The second graph shows the differences in values of beta-CrossLaps concentrations between both methods. Resulting concentrations were subject to regression analysis. I applied linear regression and Grubbs test for finding out the outlying values excluded from the further statistical processing. I performed Passing-Bablok regression based on the remaining values. As a result of regression equation and 95% CI of the slope B and intercept A, the proportional error of measuring was rejected but on the contrary, the systematic error was confirmed. Correlation coefficient R = 0,97 shows a very good linear dependency between both methods. It turned out by practice in the laboratory that the evaluation of concentrations beta-CrossLaps from the same patients on various appliances may show partially different values. I worked at two different analysers, each of them was based on another principle, with a different sensitivity and calibration. All of this could have the influence on the resulting concentration of individual samples. The advantage of automatic analyser IDS-iSYS is a quicker determination. Moreover it is possible to perform on this apparatus all the possible examination concerning the bone metabolism from D vitamin, parathormone, osteocalcin up to bone markers. It is advantage for the patients with osteoporosis as well as with other metabolic skeleton diseases. It follows from this that all the necessary examinations may be carried out on one apparatus.
|
|
Possibilities of Big Data use for Competitive Intelligence
Verníček, Marek ; Molnár, Zdeněk (advisor) ; Šperková, Lucie (referee)
The main purpose of this thesis is to investigate the use of Big Data for the methods and procedures of Competitive Intelligence. Among the goals of the work is a toolkit for small and large businesses which is supposed to support their work with the whole process of Big Data work. Another goal is to design an effective solution of processing Big Data to gain a competitive advantage in business. The theoretical part of the work processes available scientific literature in the Czech Republic and abroad as well as describes the current state of Competitive Intelligence, and Big Data as one of its possible sources. Subsequently, the work deals with the characteristics of Big Data, the differences from working with common data, the need for a thorough preparation and Big Data applicability for the methods of Competitive Intelligence. The practical part is focused on analysis of Big Data tools available in the market with regard to the whole process from data collection to the analysis report preparation and integration of the entire solution into an automated state. The outcome of this part is the Big Data software toolkit for small and large businesses based on their budget. The final part of the work is devoted to the classification of the most promising business areas, which can benefit from the use of Big Data the most in order to gain competitive advantages and proposes the most effective solution of working with Big Data. Among other benefits of this work are expansion of the range of resources for Competitive Intelligence and in-depth analysis of possibilities of Big Data usage, designed to help professionals make use of this hitherto untapped potential to improve market position, gain new customers and strengthen the existing user base.
|
|
Ruthenium (II) Complexes with 6,7-Diaza[5]phenacene.
Beránek, Tomáš ; Žádný, Jaroslav ; Jakubík, Pavel ; Církva, Vladimír ; Storch, Jan
In this work we focused on preparation of novel bidentate and fully aromatic N,N-ligand and its ruthenium complexes. 6,7-Diaza[5]phenacene (1) was synthetized from 4-bromoisoquinoline by microwave-assisted tandem Hyama-Heck cross coupling reaction3 followed by photocyclization (Scheme 1). With 6,7-diaza[5]phenacene (1) in our hand, we prepared some new ruthenium(II) complexes (e.g. 2) , characterized them from structural point of view and determined some of their electronic and optical properties with regard to their application potential.
Fulltext: content.csg -  PDF
Plný tet: SKMBT_22316112114160 - PDF
|
|
STRAIN ENGINEERING OF THE ELECTRONIC STRUCTURE OF 2D MATERIALS
del Corro, Elena ; Peňa-Alvarez, M. ; Morales-García, A. ; Bouša, Milan ; Řáhová, Jaroslava ; Kavan, Ladislav ; Kalbáč, Martin ; Frank, Otakar
The research on graphene has attracted much attention since its first successful preparation in 2004. It possesses many unique properties, such as an extreme stiffness and strength, high electron mobility, ballistic transport even at room temperature, superior thermal conductivity and many others. The affection for graphene was followed swiftly by a keen interest in other two dimensional materials like transition metal dichalcogenides. As has been predicted and in part proven experimentally, the electronic properties of these materials can be modified by various means. The most common ones include covalent or non-covalent chemistry, electrochemical, gate or atomic doping, or quantum confinement. None of these methods has proven universal enough in terms of the devices' characteristics or scalability. However, another approach is known mechanical strain/stress, but experiments in that direction are scarce, in spite of their high promises.\nThe primary challenge consists in the understanding of the mechanical properties of 2D materials and in the ability to quantify the lattice deformation. Several techniques can be then used to apply strain to the specimens and thus to induce changes in their electronic structure. We will review their basic concepts and some of the examples so far documented experimentally and/or theoretically.
|
|
Black Chromia Coatings on Metal Tubes for the Solar Collectors
Brožek, V. ; Mastný, L. ; Novák, M. ; Vilémová, Monika ; Kubatík, Tomáš František
This paper describes the results of the first phase of the study preparation, structure and properties of coatings modification of black chromium oxide on copper, aluminium, iron and zirconium tubes for solar collectors. The coatings are prepared by plasma spraying of liquid chromate method which is known as liquid precursor plasma spraying. Coatings have the function of an energy trap for thermal radiation wavelengths of 1 μm – 3 μm i.e. in the IR region. At the same time, the coating increases the corrosion resistance of metal substrates. The nanometric structure and thickness of the coating depend of the feeding distance and the concentration of chromate precursors. For the deposition of nanometric splats of melt chromiumIII oxide, a new type of feeder that injects precursors into the water stabilized thermal plasma produced by the WSP® generator has been\ndeveloped.\n
|
|
Satisfaction of women in labour with nursing care during childbirth.
KLÍMOVÁ, Magdaléna
This dissertation investigates the level of satisfaction among expectant mothers with the care services provided during childbirth. Satisfaction reflects a subjective perception of an expectant mother in meeting her needs during childbirth. The feeling of satisfaction is very personal, however, evaluation of the care provided needs to be determined and not ignored. It is important for expectant mothers that the health care professionals present as empathic, friendly, co-operative, and tactful.Theoretical part was developed from evidence-based literature and available findings related to this problematic. There is a description of a childbirth process including a midwife's role during the individual stages of childbirth and options for pain management. Other chapters focus on midwife's approach toward an expectant mother and factors which influence the level of satisfaction during childbirth. Dissertation's aim was to determine whether the expectant mothers were more satisfied in smaller maternity departments, and to evaluate the way a midwife may influence the mother's satisfaction. There were two hypotheses stated and verified by a statistical testing. Hypothesis No. 1: Expectant mothers are more satisfied in smaller maternity departments than larger ones. Hypothesis No. 2: The level of satisfaction is influenced by midwife's empathic approach. Practical part focused mainly on a midwife's approach toward expectant mother. A quantitative research was implemented in form of questionnaires. The research sample constituted of expectant mothers from four postpartum departments in the Czech Republic. In total the sample included 215 expectant mothers, 109 from smaller facilities and 106 from larger maternity departments. In terms of the overall level of satisfaction with their midwife during the childbirth process, 89% of expectant mothers from smaller maternity departments and 83% of expectant mothers from larger departments stated they were satisfied. Conversely, 11% of respondents from smaller facilities and 17% of respondents from larger facilities were dissatisfied. Based on research analysis comparing the level of satisfaction of expectant mothers from smaller and larger maternity departments the hypothesis no. 1 "Expectant mothers are more satisfied in smaller maternity departments than the larger ones" did not show as statistically significant and was rejected. Nonetheless, the questionnaire responses clearly showed that empathic approach of a midwife influenced expectant mother's satisfaction. Statistical testing demonstrated a significant correlation between an expectant mother's satisfaction and empathic approach of a midwife. The second hypothesis "The level of satisfaction is influenced by midwife's empathic approach" was accepted.The research findings may serve as a guiding material for the midwives in order to provide a high quality care to expectant mothers during the childbirth process. They may also be utilised by future midwives who are in undergraduate preparation for the profession, or those professionals who contribute in any way during the childbirth process. Additionally, the research findings may be presented at conferences designated for midwives.
|
|
Sorption and Stabilization of Metals/Mettalloids by Innovative Synthesized Sorbent Amochar.
Ouředníček, P. ; Trakal, L. ; Komárek, M. ; Pohořelý, Michael
Remediation of contaminated soil which is based on stabilization and immobilization of potential\nhazardous substance by sorption materials has been studied intensively nowadays. Biochar – activated organic carbon belongs to this group of stabilizing agents which can adsorb wide range of contaminants, including metals/metalloids. Surface area of the biochars is quite large in general and functional groups (e.g. COO–) can form chelates or alkaline elements on the surface, which is represented by cation exchange capacity. Altogether with the high pH values (7.00 – 10.00), biochars are quite effective sorbents and can adsorb metals/metalloids from the solution (ground water), especially in acidic soils (in the environments affected by intensive mining activities). Sorption\neffectiveness can be increased (especially for As (V) or Cr (VI) sorption) by modification of biochar by various types of secondary oxides. Innovative sorbent AMOchar (AMO + biochar) has been synthesized currently. The product was prepared by adding of biochar to the reaction solution during amorphous manganese oxide (AMO) synthesis. The AMOchar was formed mainly by Mn-oxalates which had coated surface of the pristine biochar. AMOchar composite was able to remove significantly higher amounts of various metal(loid)s from the solution despite the rather high pH of the material. Sorption effectiveness was high not only in case of Pb (II) sorption (almost 99%), and Cd(II) (51.2%), but also a very high amount of As(V), 91.4%. Additionally, both AMOchar composite was able to reduce Mn leaching. This can avoid potential post-contamination caused by the dissolution of less stable Mn-oxalates as observed in the pure AMO.
Fulltext: content.csg - PDF
Plný tet: SKMBT_22316111113040 - PDF
|
|
Plasma spraying from liquids: plasma liquid interaction and coating build up
Tesař, Tomáš ; Mušálek, Radek ; Medřický, Jan ; Lukáč, František
Plasma spraying from liquid feedstocks is a rapidly developing field of thermal spraying since the coatings prepared from liquids exhibit some unique features, such as high hardness, thermal shock resistance or low thermal and electric conductivity. The key factor influencing the final coating character and properties is the input material which may be in the form of a suspension or a solution. Parameters of the selected suspension (solids concentration, viscosity, surface tension, chemical composition, etc.) or solution (concentration, etc.) determine its interaction with the plasma jet which strongly influences the coating buildup. This proceeding introduces the problematics of the interaction between the liquid feedstock material with the plasma jet and presents the way of evaluation of the coating buildup.
|
|
Microbiota of the digestive tract of bees and related insect and the influencing facftors
Hroncová, Zuzana ; Havlík, Jaroslav (advisor) ; Kalous, Lukáš (referee)
This thesis consists of six research chapters, out of which, five have already been published in research journals, 1 is in the process of submission and the last chapter presents original unpublished confidential data in the process of manuscript preparation.
The research presented in this thesis concerns the complex mechanisms of bees and wasps immune system focused on microbiota as component of immunity. As shown in the introduction, highly social and managed species of bees like honey bees and bumble bees, play key roles in natural and agricultural ecosystems worldwide. Recent losses of bees have been attributed to pesticide exposure, poor nutrition, increased parasite loads and habitat degradation. Over the past several years, governments, beekeepers, and the general public worldwide have become concerned by increased losses of honey bee colonies, calling for more research on how to keep colonies healthy. Our main aim was to explore the complex mechanisms of bees and related species gut bacterial populations, their links to insect immunity and investigate the opportunities for an intervention. Part of our aim was to characterise the bumble bee and wasp gut microbiota using 16S RNA sequencing in a search for potentially novel bacterial species.
We have tried to explain how microbiome interacts with the host and showed that major members of these communities appear to benefit the host. The simple gut communities of social bees present ideal model systems to investigate the underlying evolutionary and genetic processes of such interactions. Information based on our results may help in the design of proper probiotic supplementation strategies with respect to physiological conditions in the honey bee gut.
|
guest ::
