| |
|
The Founders of Post-Keynesianism and the Concept of Reswitching
Kraffer, Robin ; Potužák, Pavel (advisor) ; Chytilová, Helena (referee)
The thesis deals with the evolution of thoughts of Joan Robinson's, Nicholas Kaldor's, Piero Sraffa's and Luigi Pasinetti's with regards to the issue of reswitching. Discussing Robinson, Kaldor, and Sraffa, it addresses the importance of the discussion on imperfect competition and Keynes's theory for developing their opinions within the capital theory. This issue was challenged in the 50s by Robinson who asked how capital can be measured. She discovered an option of reswitching to a more capital-using technique during a wage increase, but she did not focus on it very much. The thesis also seeks the importance of Sraffa's solution to the invariant standard of value for developing the debate on reswitching the technologies in the 60s, which was joined by both Pasinetti and Robinson. However, Robinson refused again in the 70s to deem the reswitching important within the critique of the neoclassical theory, and thus joined Kaldor who had voiced similar thoughts. At the end of the thesis, the question of Robinson underestimating the importance of reswitching, as pronounced by Pasinetti, is answered - she underestimated it in the 50s, whereas it is impossible to give a clear answer when it comes to the 70s, despite the differences found among Post-Keynesians and Neo-Ricardians.
|
|
Strategic analysis of Plzeňský Prazdroj, a. s.
Jirásková, Žaneta ; Dvořáček, Jiří (advisor) ; Mareš, David (referee)
The aim of this thesis is to do strategic analysis of Plzeňský Prazdroj, a. s. and to provide some recommendations for the further development of company. To achieve this goal, it is necessary to conduct external and internal analysis, which will provide a comprehensive view of the environment, in which the company operates. The work is divided into theoretical and practical part. The theoretical part defines the basic methods and techniques that are then applied to an analyzed company.
|
|
Clustering and regression analysis of micro panel data
Sobíšek, Lukáš ; Pecáková, Iva (advisor) ; Komárek, Arnošt (referee) ; Brabec, Marek (referee)
The main purpose of panel studies is to analyze changes in values of studied variables over time. In micro panel research, a large number of elements are periodically observed within the relatively short time period of just a few years. Moreover, the number of repeated measurements is small. This dissertation deals with contemporary approaches to the regression and the clustering analysis of micro panel data. One of the approaches to the micro panel analysis is to use multivariate statistical models originally designed for crosssectional data and modify them in order to take into account the within-subject correlation. The thesis summarizes available tools for the regression analysis of micro panel data. The known and currently used linear mixed effects models for a normally distributed dependent variable are recapitulated. Besides that, new approaches for analysis of a response variable with other than normal distribution are presented. These approaches include the generalized marginal linear model, the generalized linear mixed effects model and the Bayesian modelling approach. In addition to describing the aforementioned models, the paper also includes a brief overview of their implementation in the R software. The difficulty with the regression models adjusted for micro panel data is the ambiguity of their parameters estimation. This thesis proposes a way to improve the estimations through the cluster analysis. For this reason, the thesis also contains a description of methods of the cluster analysis of micro panel data. Because supply of the methods is limited, the main goal of this paper is to devise its own two-step approach for clustering micro panel data. In the first step, the panel data are transformed into a static form using a set of proposed characteristics of dynamics. These characteristics represent different features of time course of the observed variables. In the second step, the elements are clustered by conventional spatial clustering techniques (agglomerative clustering and the C-means partitioning). The clustering is based on a dissimilarity matrix of the values of clustering variables calculated in the first step. Another goal of this paper is to find out whether the suggested procedure leads to an improvement in quality of the regression models for this type of data. By means of a simulation study, the procedure drafted herein is compared to the procedure applied in the kml package of the R software, as well as to the clustering characteristics proposed by Urso (2004). The simulation study demonstrated better results of the proposed combination of clustering variables as compared to the other combinations currently used. A corresponding script written in the R-language represents another benefit of this paper. It is available on the attached CD and it can be used for analyses of readers own micro panel data.
|
|
Výběr a implementace open source nástroje pro řízení portfolia projektů
Marek, Jan ; Chlapek, Dušan (advisor) ; Kučera, Jan (referee)
Methods and ways of implementation of changes and innovations in companies through project management are in today's society very well established. There exists methodologies, techniques and tools for the management of individual projects. However in a role of project manager, I very often faced the fact that companies are performing the project portfolio management in very intuitive way. This in itself leads to failed and prematurely terminated projects, initiation of the wrong projects or realisation of correct projects, but at the wrong time. Very often I have also recognized, that there is lack of awareness of fact, that there are also Open Source applications that can help with the organization's portfolio. This thesis deals with the definition of requirements, search and selection of proper OSS application and subsequent implementation. In the first part of this thesis I prepare a theoretical framework about PPM, and on that basis then identify and verify a set of requirements for selection of right OSS PPM application. The next section of thesis describes searching for suitable applications from a variety of sources, assessment against the requirements and the final selection. In the last part the implementation project is drafted, which aims to serve other colleagues in project management as one of the possible implementation paths. The outputs are then continuously confronted with experts in matter of projects and project management in the field of IT in order to maximize symbiosis between theory and real life experiences. Virtually every project management methodology defines the collection of already-proven techniques, best practices or lessons learned from the previous similar implementations. The main contribution of this thesis I see in fact that it contains not only the design of the project implementation, but also describes a logical path, what leads to the result. Therefore this thesis could be used as a base or discussed best practice, when a project of implementation of PPM application in place.
|
| |
|
Time lapse tomography of fracture progress in silicate-based composite subjected to the loading a combination with acoustic emission scanning
Kumpová, Ivana ; Kytýř, Daniel ; Fíla, Tomáš ; Veselý, V. ; Trčka, T. ; Vopálenský, Michal ; Vavřík, Daniel
The initiation and propagation of a fracture in quasi-brittle materials (such as silicatebased composite) is an increasingly discussed topic for which various methods of research have been developed/applied. As the quasi-brittle silicate-based composite compounds are very non-homogenous, the mechanism of the crack initiation and propagation can be very different even for samples with the\nidentical geometry. One possible approach to study the fracture mechanism in quasi-brittle materials is to use several different experimental techniques in a single experiment and perform detail analysis to identify generally valid fracture process phenomena. In this work, a simultaneous monitoring of fracture\nprocess zone formation and propagation by three different methods is presented and discussed. A three point bending test was performed on a notched silicate composite specimen. During the loading process, a highly accurate force displacement dependence was recorded accompanied with X-ray radiography,\nX-ray computed tomogra-phy and acoustic emission scanning.
|
|
A pair of phase-synchronized semiconductor lasers for length metrology
Hucl, Václav ; Holá, Miroslava ; Čížek, Martin ; Řeřucha, Šimon ; Pham, Minh Tuan ; Pravdová, Lenka ; Lazar, Josef ; Číp, Ondřej
Semiconductor lasers are increasingly widespread in areas that have been so far dominated by He-Ne lasers. One of such areas is the length metrology, where He-Ne laser operating at 633nm wavelength is still a traditional source of coherent light for laser interferometers distance measuring. The advantages of semiconductor lasers compared with He-Ne laser are greater optical power and a significantly wider range of wavelength tuning without mode jumps. Another advantage is the possibility of frequency modulation of wavelength of the laser diode by directly changing the injection current. The benefits predetermine these laser diodes for the realization of dual-frequency laser sources for heterodyne interferometry. In this case, using a phase-locked loop technique the optical frequency of a laser diode is locked to the optical frequency of another laser diode with a certain frequency offset in the MHz order. In our contribution we present utilization of DBR laser diodes in implementing a dual-frequency laser source for laser interferometry with heterodyne detection.\n
|
|
Hybrid 3D Face Recognition
Mráček, Štěpán ; Bours, Patrick (referee) ; Bronstein, Michael (referee) ; Drahanský, Martin (advisor)
Tato disertační práce se zabývá biometrickým rozpoznáváním 3D obličejů. V úvodu práce jsou prezentovány současné metody a techniky pro rozpoznávání. Následně je navržen nový algoritmus, který využívá tzv. multialgoritmickou biometrickou fúzi. Vstupní snímek 3D obličeje je paralelně zpracování dílčími rozpoznávacími podalgoritmy a celkové rozhodnutí o identitě nebo verifikaci identity uživatele je výsledkem sloučení výstupu těchto podalgoritmů. Rozpoznávací algoritmus byl testován na veřejně přístupné databázi 3D obličejů FRGC v 2.0 i vlastních databázich, které byly pořízeny pomocí senzorů Microsoft Kinect a SoftKinetic DS325.
|
|
Packet Classification Algorithms
Puš, Viktor ; Lhotka,, Ladislav (referee) ; Dvořák, Václav (advisor)
Tato práce se zabývá klasifikací paketů v počítačových sítích. Klasifikace paketů je klíčovou úlohou mnoha síťových zařízení, především paketových filtrů - firewallů. Práce se tedy týká oblasti počítačové bezpečnosti. Práce je zaměřena na vysokorychlostní sítě s přenosovou rychlostí 100 Gb/s a více. V těchto případech nelze použít pro klasifikaci obecné procesory, které svým výkonem zdaleka nevyhovují požadavkům na rychlost. Proto se využívají specializované technické prostředky, především obvody ASIC a FPGA. Neméně důležitý je také samotný algoritmus klasifikace. Existuje mnoho algoritmů klasifikace paketů předpokládajících hardwarovou implementaci, přesto však tyto přístupy nejsou připraveny pro velmi rychlé sítě. Dizertační práce se proto zabývá návrhem nových algoritmů klasifikace paketů se zaměřením na vysokorychlostní implementaci ve specializovaném hardware. Je navržen algoritmus, který dělí problém klasifikace na jednodušší podproblémy. Prvním krokem je operace vyhledání nejdelšího shodného prefixu, používaná také při směrování paketů v IP sítích. Tato práce předpokládá využití některého existujícího přístupu, neboť již byly prezentovány algoritmy s dostatečnou rychlostí. Následujícím krokem je mapování nalezených prefixů na číslo pravidla. V této části práce přináší vylepšení využitím na míru vytvořené hashovací funkce. Díky použití hashovací funkce lze mapování provést v konstantním čase a využít při tom pouze jednu paměť s úzkým datovým rozhraním. Rychlost tohoto algoritmu lze určit analyticky a nezávisí na počtu pravidel ani na charakteru síťového provozu. S využitím dostupných součástek lze dosáhnout propustnosti 266 milionů paketů za sekundu. Následující tři algoritmy uvedené v této práci snižují paměťové nároky prvního algoritmu, aniž by ovlivňovaly rychlost. Druhý algoritmus snižuje velikost paměti o 11 % až 96 % v závislosti na sadě pravidel. Nevýhodu nízké stability odstraňuje třetí algoritmus, který v porovnání s prvním zmenšuje paměťové nároky o 31 % až 84 %. Čtvrtý algoritmus kombinuje třetí algoritmus se starším přístupem a díky využití několika technik zmenšuje paměťové nároky o 73 % až 99 %.
|
guest ::
