|
Study of behavior of concrete and cement based composite materials exposed to high temperatures
Bodnárová, L. ; Horák, D. ; Válek, J. ; Hela, R. ; Sitek, Libor
The paper describes possibilities of observation of behaviour of concrete and cement based composite material exposed to high temperatures. Nowadays, for large-scale tests of behaviour of concrete exposed to high temperatures, testing devices of certified fire testing stations in the Czech Republic and surrounding states are used. These tests are quite expensive. For experimental verification of smaller test specimens, a testing device was built at the Technical University in Brno, where tests of thermal loading of concrete tests specimens of various sizes can be carried out (dimensions up to 800 x 800 x 800 mm or slabs up to 1100 mm of length). The testing device opens new ways of observation of behaviour of concrete and cement based composite materials exposed to high temperatures as well as preparation of specimens for observation of interaction of water jet and concrete degraded by action of high temperatures.
Fulltext: content.csg -  DOC
Plný tet: UGN_0398264 - DOC
|
|
Pulsed liquid jet generated by pulse multiplication technique
Dvorský, R. ; Sitek, Libor ; Sochor, T.
First theoretical papers summarizing the high mechanical energy cumulation when high-speed drops impacting the solid surface as a result of the water hammer effect have been known since 1960’s. Heymann has demonstrated that pressure maximum in the impact of a spherical drop of a liquid is several times higher than the presupposed maximum for the classical water hammer effect. The latter maximum pressure itself exceeds the mere stagnation pressure of the continuous jet many times hereat. When developing devices for pulse jet generation a new generalization of the classical water hammer theory for high pressures has been implemented. Based on this the new patented principle of “pulse multiplication” has been formulated. The pulse multiplier is the source of high-pressure pulses with 100% depth of modulation of liquid jet discharge velocity that allows increasing the jet disintegration effect significantly without the abrasive material application.
Fulltext: content.csg - DOC
Plný tet: UGN_0398574 - DOC
|
|
Application of art therapy elements for students at high special school (practical)
Koubská, Patricie ; Valešová Malecová, Barbara (advisor) ; Šiška, Jan (referee)
Application of art therapy elements for students at high special school (practical) The theme of this bachelor thesis is the use of art therapy procedure for pupils from practical two-year high school. The aim of this thesis is to consider the possibilities of using elements of group art therapy for the development of self-knowledge, communication, for strengthening of prosocial ties and increasing of a sense of group belonging. In the narrower sense, art therapy is underwood as a fine art therapy. Theoretical basis of the thesis will be the methods of art therapy, their possibilities and procedures, developmental aspects of maturing, specifics of maturing for pupils with handicaps (mental retardation issues, specific disorders of behavior problems of pupils with social and physical handicaps). In the practical part of the thesis there is described the use of these methods in my own art lessons.
|
|
Information systems security penetration testing
Klíma, Tomáš ; Doucek, Petr (advisor) ; Čermák, Igor (referee) ; Čapek, Jan (referee) ; Štubňa, Ivan (referee)
The aim of this dissertation thesis is to develop new methodology of information systems penetration testing based on analysis of current methodologies and the role of penetration tests in context of IS/IT governance. Integral part of this aim is evaluation of the methodology. The first part of the thesis is devoted to the presentation of history and current state of research in selected area, definiton of basic terms and introduction of role of the penetration tests. This part is followed by the review of relevant sources and comparative study of current methodologies with a goal to identify their weaknesses. Results from this study are further used as a basis for new methodology development. Classification of IS penetration tests types and testing scenarios are also included. The second part includes design of new methodology, at first its history, structure and principles are presented, then its framework is decribed in high level of detail. In the third part the reader can find (theoretical and practical) validation. The biggest scientific contribution is the methodology itself focused on managment of penetration tests (which is the area currently not sufficiently descibed). Secondary contribution is the extensive review and the comparative analysis of current methodologies. Contribution to the economic and technical (practical) application we can mainly see in the development of new methodology which enables companies to improve management of penetration tests (especially planning, operational management and implementation of countermeasures).
|
|
Use of Interest Rate Models for Interest Rate Risk Management in the Czech Financial Market Environment
Cíchová Králová, Dana ; Arlt, Josef (advisor) ; Cipra, Tomáš (referee) ; Witzany, Jiří (referee)
The main goal of this thesis is to suggest an appropriate approach to interest rate risk modeling in the Czech financial market environment in various situations. Three distinct periods are analyzed. These periods, which are the period before the global financial crisis, period during the financial crisis and in the aftermath of the global financial crisis and calming subsequent debt crisis in the eurozone, are characterized by different evaluation of liquidity and credit risk, different relationship between financial variables and market participants and different degree of market regulations. Within this goal, an application of the BGM model in the Czech financial market environment is crucial. Use of the BGM model for the purpose of predicting a dynamics of a yield curve is not very common. This is firstly due to the fact that primary use of this model is a valuation of interest rate derivatives while ensuring the absence of arbitrage and secondly its application is relatively difficult. Nevertheless, I apply the BGM model to obtain predictions of the probability distributions of interest rates in the Czech and eurozone market environment, because its complexity, direct modeling of a yield curve based on market rates and especially a possibility of parameter estimation based on current swaptions volatilities quotations may lead to a significant improvement of predictions. This improvement was also confirmed in this thesis. Use of swaptions volatilities market quotations is especially useful in the period of unprecedented mone- tary easing and increased number of central banks and other regulators interventions into financial markets that occur after the financial crisis, because it reflects current market expectations which also include future interventions. As a consequence of underdevelopment of the Czech financial market there are no market quotations of Czech koruna denominated swaptions volatilities. I suggest their approximations based on quotations of euro denominated swaptions volatilities and also using volatilities of koruna and euro forward rates. Use of this approach ensures that predictions of the Czech yield curve dynamics contain current market expectations. To my knowledge, any other author has not presented similar application of the BGM model in the Czech financial market environment. In this thesis I further predict a Czech and Euro area money market yield curve dynamics using the CIR and the GP models as representatives of various types of interest rates models to compare these predictions with BGM predictions. I suggest a comprehensive system of three criteria, based on comparison of predicti- ons with reality, to describe a predictive power of selected models and an appropria- teness of their use in the Czech market environment during different situations in the market. This analysis shows that predictions of the Czech money market yield curve dynamics based on the BGM model demonstrate high predictive power and the best 8 quality in comparison with other models. GP model also produces relatively good qua- lity predictions. Conversely, predictions based on the CIR model as a representative of short rate model family completely failed when describing reality. In a situation when the economy allows negative rates and there is simultaneously a significant likelihood of their implementation, I recommend to obtain predictions of Czech money market yield curve dynamics using GP model which allows existence of negative interest rates. This analysis also contains a statistical test for validating the predictive power of each model and information on other tests. Berkowitz test rejects a hypothesis of accurate predictions for each model. However, this fact is common in real data testing even when using relatively good model. This fact is especially caused by difficult fulfilment of test conditions in real world. To my knowledge, such an analysis of the predictive power of selected interest rate models moreover in the Czech financial market environment has not been published yet. The last goal of this thesis is to suggest an appropriate approach to obtaining pre- dictions of Czech government bonds risk premium dynamics. I define this risk premium as a difference between government bond yields and fixed rate of CZK IRS with the same length. I apply the GP model to describe the dynamics of this indicator of the Czech Republic credit risk. In order to obtain a time series of the risk premium which are necessary for estimation of GP model parameters I firstly estimate yield curves of Czech government bonds using Svensson model for each trading day since 2005. Resulting si- mulations of risk premium show that the GP model predicts the real development of risk premiums of all maturities relatively well. Hence, the proposed approach is suitable for modeling of Czech Republic credit risk based on the use of information extracted from financial markets. I have not registered proposed approach to risk premium modeling moreover in the Czech financial market environment in other publications.
|
|
Molecular characterization of selected strains of amoebae of the genus Acanthamoeba, the potential human parasites.
ŠTAUBEROVÁ, Kamila
The genus Acanthamoeba belongs to a group of organisms generally called "amoebae". These amoebae can cause fatal disease in humans, being able to enter e.g. through skin in bloodstream and then spreading through the body. In the body they further parasitize in various tissues including the brain there they cause a little known disease called "granulomatous amoebic encephalitis". The disease is most prevalent in people previously ill with, e.g., systemic lupus erythematosus. Granulomatous amoebic encephalitis leads especially to a brain inflammation, which evolves in brain tissue necrosis. Most prominent symptoms are headaches, nausea and vomiting, aphasia and ataxia. This work mentions also some other amoebae as Neagleria fowleri, Balamuthia mandrillaris, Sappinia diploidea a Entamoeba histolytica. Neagleria fowleri is known as a causative agent of an illness called primary amoebic encephalitis. First, I had isolated DNA using Genomic Mini Kit from five amoeba strains. The next step was PCR amplification it is a method depending on alternation of high and lower temperatures in thermocycler. It was followed by electrophoresis, where the presence of bands in agarose gel, which I had prepared myself, showed the presence of absence of amoebic DNA fragments. In case of successful amplification (presence of PCR product) the fragment was excised from gel with scalpel and transferred in a test-tube. The DNA was then cleaned via extraction. The extraction was done with Gel/DNA Fragments Extraction Kit. An intermediate step before sequencing, we tried to clone the product it became obvious that this way is not very effective. The sequencing was provided by the company Seqme. Following work with sequences was conducted in programs BioEdit and alignment in ClustalX. Then, phylogenetic trees were computed in the program PAUP and viewed in TreeView. The results were interpreted in the terms of relationships between the amoebae majority of them belonged to the most common genotype, T4, but their relations within the genotype were not so tight. Concerning the clinical samples available to me (both from human eyes), one of them (O1) belonged to T4 genotype, whereas the other one (O2) belonged to the genotype T3. Another result was evaluation of the effectivity of different primers: specific primers AcaJDP1 and AcaJDP2 were much more efficient than originally used "eukaryotic" primers ERIB1 and ERIB10.
|
|
Changes in structure and phase composition in the surface of tram rail
Švábenská, Eva ; Roupcová, Pavla ; Schneeweiss, Oldřich
We have investigated structure and phase composition of surface layer of tram rails after long time running and the results were compared with those obtained on the original part of material. Changes due to effects of severe plastic deformation together with thermal shocks by friction process were expected. The information about structure and phase composition was obtained by optical and scanning electron microscopy, X-Ray Powder Diffraction, Mössbauer Spectroscopy and Glow Discharge Emission Spectroscopy (GDOES) and this was completed by microhardness measurements. The results show that the surface layer in comparison with the original material exhibits important changes in grain structure, an increase in microhardness and high content of iron oxide and hydrooxides. According to the depth profile of the chemical composition measured by GDOES there is an increase in carbon content in the surface layer which can be effect of up-hill diffusion.
|
|
STRAIN ENGINEERING OF THE ELECTRONIC STRUCTURE OF 2D MATERIALS
del Corro, Elena ; Peňa-Alvarez, M. ; Morales-García, A. ; Bouša, Milan ; Řáhová, Jaroslava ; Kavan, Ladislav ; Kalbáč, Martin ; Frank, Otakar
The research on graphene has attracted much attention since its first successful preparation in 2004. It possesses many unique properties, such as an extreme stiffness and strength, high electron mobility, ballistic transport even at room temperature, superior thermal conductivity and many others. The affection for graphene was followed swiftly by a keen interest in other two dimensional materials like transition metal dichalcogenides. As has been predicted and in part proven experimentally, the electronic properties of these materials can be modified by various means. The most common ones include covalent or non-covalent chemistry, electrochemical, gate or atomic doping, or quantum confinement. None of these methods has proven universal enough in terms of the devices' characteristics or scalability. However, another approach is known mechanical strain/stress, but experiments in that direction are scarce, in spite of their high promises.\nThe primary challenge consists in the understanding of the mechanical properties of 2D materials and in the ability to quantify the lattice deformation. Several techniques can be then used to apply strain to the specimens and thus to induce changes in their electronic structure. We will review their basic concepts and some of the examples so far documented experimentally and/or theoretically.
|
|
Micro-electromembrane extraction across multiple aqueous and organic phases for selective pretreatment of raw biological samples
Kubáň, Pavel ; Boček, Petr ; Seip, K. F. ; Gjelstad, A. ; Pedersen-Bjergaard, S.
Micro-electromembrane extraction (μ-EME) across multiple aqueous and organic\nsolutions was developed for selective extractions of various analytes from untreated\nbiological samples. The novel approach requires μL volumes of samples and organic\nsolvents, which form consecutive immiscible plugs in a transparent polymeric capillary\nand the extraction process is accelerated by application of d.c. voltage. Number of the\nplugs, their composition, volume and sequence in the extraction capillary can be chosen\nspecifically for each particular application and high variability and selectivity of the\nextraction process can be achieved. In this contribution, we demonstrate suitability of\na five-phase μ-EME system for simultaneous extractions of cations and anions from\nurine and for selective extractions of basic analytes based on their acid-base strength\nfrom plasma.
|
| |
guest ::
