National Repository of Grey Literature 21,191 records found  1 - 10nextend  jump to record: Search took 0.89 seconds. 

Scanning electron microscopy with low energy electrons
Mika, Filip
A method of scanning electron microscopy (SEM) of nonconductive specimens, based on measurement and utilisation of the critical energy of electron impact, is described in detail together with examples of its applications. The critical energy, at which the total electron yield curve crosses the unit level, is estimated on the base of measurement of the time development in the image signal from beginning of irradiation. The method is programmed and implemented as a module to the controlling software of the microscope type VEGA, where it secures fast search for the critical energy value.

Proposed marketing strategy of a low-cost airline
Khomutova, Sofia ; Král, Petr (advisor) ; Tročil, Jan (referee)
My Master thesis focuses on the design of the marketing strategy of a low-cost airline SparrowJet. The first chapter of the theoretical parts contains the required basics of theoretical information necessary to develop a marketing plan. In the second chapter is an analysis of the air transportation market with an emphasis on the low-cost segment. The final chapter of the theoretical part is dedicated to the marketing mix in the transportation. The practical part of my thesis begins with the situation analysis, which includes: the PEST analysis, Porters five forces analysis, a competition analysis and a customer analysis. My work is concluded with a complete proposal of a marketing strategy for the airline, including both basic strategy of S-T-P and a marketing mix.

Using of the Care benefit by Users of Social services
ŠINÁKLOVÁ, Marie
The bachelor thesis deals with the widespread social benefit, the attendance allowance and problems associated with it, which implies the main objective of this work, to find out how or what for this allowance is used. This thesis consists of a theoretical and a practical part. In the theoretical part I focused mainly on the purpose, the principles and basic functions of the allowance. I have also described who is and who is not entitled to the allowance, and when such entitlement may extinguish. In this part, I also focused on what the allowance is intended for and what it has to be properly utilized for. Furthermore, I mentioned in my thesis the inspection in accordance with the Social Services Act and the means of protection applied by the state in order to prevent the abuse of the allowance. In the theoretical part, I also mentioned the history of this allowance when it still was an allowance for attending a close person. Due to the fact that the attendance allowance is intended for people who are disadvantaged in some way, I also put a chapter on disability into the theoretical part, where I gave a definition of disability, its types and forms or for example specific needs that result from such disability. In the second, practical part, the qualitative research method was applied. Data collection was conducted by questioning using the technique of a semi-controlled interview. Interviews were conducted with six communication partners that I have selected using the "snowball" method, so called accretion. The aim of this thesis was mainly to determine how or what for the attendance allowance is used by ist beneficiaries. Whether the amount of the attendance allowance is sufficient for its users to cover the costs of providing the social service. Whether users because of the low value of the attendance will be required to limit their individual needs and interests in some way. Whether users have identified some changes after the amendment of the Social Services Act. For the above objectives I tried to get the answers needed to solve the respective issue.

Optimization of network flow monitoring
Žádník, Martin ; Lhotka,, Ladislav (referee) ; Matoušek, Radomil (referee) ; Sekanina, Lukáš (advisor)
The thesis deals with optimization of network flow monitoring. Flow-based network traffic processing, that is, processing packets based on some state information associated to the flows which the packets belong to, is a key enabler for a variety of network services and applications. The number of simultaneous flows increases with the growing number of new services and applications. It has become a challenge to keep a state per each flow in a network device processing high speed traffic. A flow table, a structure with flow states, must be stored in a memory hierarchy. The memory closest to the processing is known as a flow cache. Flow cache management plays an important role in terms of its effective utilization, which affects the performance of the whole system. This thesis focuses on an automated design of cache replacement policy optimized to a deployment on particular networks. A genetic algorithm is proposed to automate this process. The genetic algorithm generates and evaluates evolved replacement policies by a simulation on obtained traffic traces. The proposed algorithm is evaluated by designing replacement policies for two variations of the cache management problem. The first variation is an evolution of the replacement policy with an overall low number of state evictions from the flow cache. The second variation represents an evolution of the replacement policy with a low number of evictions belonging to large flows only. Optimized replacement policies for both variations are found while experimenting with various encoding of the replacement policy and genetic operators. The newly evolved replacement policies achieve better results than other tested policies. The evolved replacement policy lowers the overall amount of evictions by ten percent in comparison with the best compared policy. The evolved replacement policy focusing on large flows lowers the amount of their evictions two times. Moreover, no eviction occurs for most of the large flows (over 90%). The evolved replacement policy offers better resilience against flooding the flow cache with large amount of short flows which are typical side effects of scanning or distributed denial of service activities. An extension of the replacement policy is also proposed. The extension complements the replacement policy with an additional information extracted from packet headers. The results show further decrease in the number of evictions when the extension is used.

The analysis of the weather impact on the shape and shift of the production frontier
Hřebíková, Barbora ; Čechura, Lukáš (advisor) ; Peterová, Jarmila (referee)
Although weather is a significant determinant of agriculture production, it is not a common practice in production analysis to investigate on its direct impact on the level of final production. We assume that the problem is methodological, since it is difficult to find a proper proxy variable for weather in these models. Thus, in the common production models, the weather is often included into a set of unmeasured determinants that affects the level of final production and farmers productivity (statistical noise, random error). The aim of this dissertation is to solve this methodological issues and find the way to define weather and its impacts in a form of proxy variable, to include this variable into proper econometric model and to apply the model. The purpose of this dissertation is to get beyond the empirical knowledge and define econometric model that would quantify weather impacts as a part of mutually (un)conditioned factors of final production, to specify the model and apply it. The dissertation is based on the assumption that the method of stochastic frontier analysis (SFA) represents a potential opportunity to treat the weather as a specific (though not firm-controllable) factor of production and technical efficiency. SFA is parametric method based on econometric approach. Its starting point is the stochastic frontier production function. The method was presented in the work of Aigner, Lovell and Schmidt (1977) and Meusen and van den Broeck (1977). Unlike commonly used econometric models, SFA is based on analysis of production frontier that is formed by deterministic production frontier function and the compound error term. The compound error term consists of two parts -- random error (statistical noise, error term) and technical inefficiency. Technical inefficiency represents the difference in the actual level of production of the producer, and the maximum attainable (possible) level that would be achieved if the producer used a particular combination of production factors in a maximum technically efficient way. Over time, it has been developed on a number of aspects - see time variant and invariant inefficiency, heteroscedasticity, measurement and unmeasured heterogeneity. Along with the DEA, SFA has become the preferred methodology in the area of production frontier and productivity and efficiency analysis in agriculture. Lately, it has been applied for example by Bakusc, Fertő and Fogarasi (2008) Mathijs and Swinnen (2001), Hockmann and Pieniadz (2007), Bokusheva and Kumbhakar (2008) Hockmann et al. (2007), Čechura a Hockmann (2011, 2012), and Čechura et al. (2014 a, b). We assume that the weather impacts should be analysed with regard to technical efficiency, rather than as a part of statistical noise. Implementation of weather in part of deterministic production function rather than in the statistical noise is a significant change in the methodical approach within the stochastic frontier analysis. Analysis of the weather impacts on the changes in the level of TE has not been greatly recorded in the associated literature and is, therefore, considered as the main contribution of this work for the current theory of production frontier estimation, or the technological effectiveness, in the field of agriculture. Taking into account other variables that are important for the relationship and whose inclusion would enhance the explanatory power of the model was part of the objective of this work.Thus, the possible effect of heterogeneity was taken into account when models were formulated and final results discussed. The paper first defined and discussed possible ways how to incorporate the effects of the weather into production frontier model. Assessing the possibility of inclusion of weather in these models was based on the theoretical framework for the development of stochastic frontier analysis, which defines the concept of technical efficiency, distance functions theory, stochastic production function theory and the methodology and techniques that are applied within the framework of SFA, which were relevant for the purpose of this work. Then, the weather impacts on the shape and shift of production frontier and technical efficiency of czech cereal production in the years 2004-2011 was analyzed. The analysis was based on the assumption that there are two ways how to define variables representing weather in these models. One way is to use specific climatic data, which directly describe the state of the weather. For the purpose of this thesis, the variables mean air temperature (AVTit) and sum of precipitation (SUMPit) in the period between planting and harvest of cereals in the individual regions of Czech republic (NUTS 3) were selected. Variables were calculated from the data on monthly mean air temperatures and monthly sums of precipitation on the regional levels provided by Czech hydro-meteorological institute CHMI. Another way to define weather variable is to use a proxy variable. In this dissertation, the calculation of climatic index (KITit) was applied. Climatic index was calculated as a sum of ratios between the actual yield levels and approximated yield levels of wheat, barley and rye, weighted by the importance of each plant in a cereal production protfolio in each region of the Czech republic. Yield levels were approximated by the linear trend functions, yield and weights were calculated with the use of data on regional production and sown area under individual grains by year at the level of regional production (NUTS 3) provided by Czech Statistical Office. Both ways of weather definition are associated with some advantages and disadvantages. Particular climatic data are very precise specificatopn of the actual weather conditions, however, to capture their impacts on the level of final production, they must be implemented into model correctly along with the number of other factors, which have an impact on the level of final production. Climatic index, on the other hand, relates the weather impacts directly to the yield levels (it has been based on the assumption that the violation from yield trends are caused by the weather impacts), though, it does not accomodate the concrete weather characteristics. The analysis was applied on unbalanced panel data consisting of the information on the individual production of 803 producers specialized on cereal production, which have each the observations from at least two years out of total 8-years time serie. Specialization on crop production was defined as minimum 50% share of cereal production on the total plant production. Final panel consists of 2332 observations in total. The values of AVTit, SUMPit a KITit has been associated with each individual producer according to his local jurisdiction for a particular region. Weather impacts in the three specified forms were implemented into models that were defined as stochastic production frontier models that capture the possible heterogeneity effects. The aim is to identify the impact of weather on shift and shape of production frontier. Through the defined models, the production technology and technical efficiency were estimated. We assume that the proposed inclusion in weather impacts will lead to a better explanatory power of defined models, as a result of weather extraction from a random components of the model, or from a set of unmeasured factors causing heterogeneity of the sample, respectivelly. Two types of models were applied to estimate TE - Fixed management model (FMM) and Random parameter model (RPM). Models were defined as translogarithmic multiple-output distance function. The analyzed endogene variable is cereal production (expressed in thousands of EUR). Other two outputs, other plant production and animal production (both expressed in thousands of EUR) are expressed as the share on cereal production and they appear on the right side of the equation together with the exogene variables representing production factors labour (in AWU), total utilized land (in acres), capital (sum of contract work, especially machinery work, and depreciation, expressed in thousands of EUR), specific material (represented by the costs of seeds, plants, fertilisers and crop protection, expressed in thousands of EUR), and other material (in thousands of EUR). The values of all three outputs, capital, and material inputs were deflated by the the country price indexes taken from the EUROSTAT database (2005=100). In Random parameter model, heterogeneity is captured in random parameters and in the determinants of distribution of the technical inefficiency, uit. All production factors were defined as a random parameters and weather in form of KITit enters the mean of uit and so it represents the possible source of unmeasured heterogeneity of a sample. In fixed management model, heterogeneity is defined as a special factor representing firm specific effects, mi. This factor represents unmeasured sources of heterogeneity of sample and enters the model in interaction with other production factors and the with the trend variable, tit.Trend variable represents the impact of technological change at a time t for each producer i. The weather impacts in form of variables AVTit a SUMPit is, together with production factors, excluded from the set of firm specific effects and it is also numerically expressed. That way weather becomes a measured source of heterogeneity of a sample. Both types of models were estimated also without the weather impacts specification in order to obtain the benchmark against which the effects of weather impacts specification on production frontier and technical efficiency is evaluated. Easier interpretation of results was achieved by naming all five estimated models as follows: FMM is a name of fixed management model that does not include specified weather variables, AVT is a name for fixed management model including weather impacts in form of average temperatures AVTit, SUMP is name of model which includes weather impacts in form of sum of precipitations SUMPit, RPM is random parameter model that does not account for weather impacts, KIT is random parameter model that includes climatic index KITit into the mean of inefficiency. All estimated models fullfilled the conditions of monotonicity and kvasikonvexity for each production factor with the exception of capital in FMM, AVT, SUMP and RPM model. Violating the kvasikonvexity condition is against the theoretical assumptions the models are based on, however, since capital is also insignificant, it is not necesary to regard model as incorrect specification. Violation of kvasikonvexity condition can be caused by the presence of other factor, which might have contraproductive influence on final production in relation to capital. For example, Cechura and Hockann (2014) mention imperfections of capital market as possible cause of inadequate use of this production factor with respect to technological change. Insufficient significancy of capital can be the result of incorrect specification of variable itself, as capital is defined as investment depreciation and sum of contract work in the whole production process and not only capital related to crop production. The importance of capital in relation to crop production is, thus, not strong enough to be significant. Except of capital are all other production factors significant on the significancy level of 0,01. All estimated models exhibit a common pattern as far as production elasticity is concerned. The highest elasticity is attributed to production factors specific and othe material. Production elasticity of specific material reaches values of 0,29-0,38, the highest in model KIT and lowest of the values in model AVT. Production elasticity of other material reahed even higher values in the range 0,40-0,47. Highest elasticity of othe material was estimated by model AVT and lowest by model KIT. Lowest production elasticity are attributed to production factors labour and land. Labour reached elasticity between 0,006 and 0,129 and land reached production elasticity in the range of 0,114 a 0,129. All estimated models displayed simmilar results regarding production elasticities of production factors, which also correspond with theoretical presumptions about production elasticities -- highest values of elasticity of material inputs correspond with naturally high flexibility of these production factors, while lowest values of elasticity of land corresponds with theoretical aspect of land as relativelly inelastic production factor. Low production elasticity of labour was explained as a result of lower labor intensity of cereals sector compared to other sectors. Production elasticity of weather is significant both in form of average temperatures between planting and harvest in a given region, AVTit, and form of total precipitation between planting and harvest in a given region, SUMPit. Production elasticity of AVTit, reach rather high value of 0,3691, which is in the same level as production elasticities of material inputs. Production elasticity of SUMPit is also significant and reach rather high lower value of 0,1489. Both parameters shows significant impact of weather on the level of final crop production. Sum of production elasticities in all models reach the values around 1, indicating constant returns of scale, RS (RSRPM=1,0064, RSKIT=0,9738, RSSUMP =1,00002, RSFMM= 0,9992, RSAVT=1,0018.). The results correspond with the conclusion of Cechura (2009) and Cechura and Hockmann (2014) about the constant returns of scale in cereals sector in Czech republic. Since the value of RS is calculated only with the use of production elasticities of production factors, almost identical result provided by all three specifications of fixed management model is a proof of correct model specification. Further, the significance of technological change and its impact on final production and production elasticities were reviewed. Technological change, TCH, represents changes in production technology over time through reported period. It is commonly assumed that there is improvement on production technology over time. All estimated models prooved significant impact of TCH on the level of final production. All specified fixed management models indicate positive impaact of TCH, which accelerates over time. Estimated random parameter models gave contradicting results -- model KIT implies that TCH is negative and decelerating in time, while model RPM indicates positive impact of TCH on the level of final production, which is also decelerating in time. It was concluded, that in case that weather is not included into model, it can have a direct impact on the positive direction of TCH effect, which can be captured by implementing weather into model and so the TCH becomes negative. However, as to be discussed later, random parameter model appeared not as a suitable specification for analyzed relationship and so the estimate of the TCH impact might have been distorted. The impact of technological progress on the production elasticities (so-called biased technological change) is in fixed management models displayed by parameters representing the interaction of production factors with trend variable. The hypothesis of time invariant parameters (Hicks neutral technological change) associated with the production factors is rejected for all models except the model AVT. Significant baised technological change is confirmed for models FMM and SUMP. Biased technological change is other material-saving and specific material-intensive. In the AVT model, where weather is represented by average temperatures, AVTit, technological change is not significant in relation to any production factors. In both random parameter models, rejection of hypothesis of time invariant parameters only confirms significance of technological change in relation to final crop production. Nonsignificant effect of technological change on production elasticity of labor, land and capital indicates a generally low ability of farmers to respond to technological developments, which can be explained by two reasons. The first reason can the possible complications in adaptation to the conditions of the EU common agricultural market (eg. there are not created adequate conditions in the domestic market, which would make it easier for farmers to integrate into the EU). This assumption is based on conclusion made by Cechura and Hockmann (2014), where they explain the fact that in number of European countries there is capital-saving technological change instead of expected capital-using technical change as the effect of serious adjustment problems, including problems in the capital market.. Second possible reason for nonsignificant effect of technological change on production elasticity of labor, land and capital is that the financial support of agricultural sector, which was supposed to create sufficient conditions for accomodation of technological progress, has not shown yet. Then, the biased TCH is not pronounced in relation to most production factors. Weather impacts (SUMPit, AVTit) are not in significant relation to technological change. Both types of models, FMM and RPM were discussed in relation to the presence of the heterogeneity effects All estimated random parameters in both RPM models are statistically significant with the exception of the production factor capital in a model that does not involve the influence of weather (model RPM). Estimated parameter for variable KITit (0,0221) shows significant positive impact of the weather on the distribution of TE. That way, heterogeneity in relation to TE is confirmed, too, as well as significant impact of weather on the level of TE. Management (production environment) is significant in all three estimated fixed management models. In models that include weather impacts (AVT, SUMP), the parameter estimates indicates positive, slightly decreasing effect of management (or heterogeneity, respectivelly) on the level of final crop production. In model FMM, on the contrary, first and second order parameters of mangement indicate also significant, but negative and decelerating effect of management (heterogeneity) on final crop production. If weather impact is included into models in form of AVTit, or. SUMPit, the direction of the influence of management on the level of final crop production changes. Based on the significance of first order parameter of management, significant presence of heterogeneity of analyzed sample is confirmed in all three estimated fixed management models. As far as the effect of heterogeneity on single production factors (so called management bias) is concerned, the results indicate that in case of model that does not include weather impacts (model FMM) the heterogeneity has positive impact on production elasticities of land and capital and negative effect on the production elasticities of material inputs. In models that account for weather impacts, heterogeneity has negative effect on production elasticities of land and capital and positive effect on the elasticity of material inputs. Heterogeneity effect on the production elasticity of labor is insignificant in all models FMM. In all three estimated models, the effect of heterogeneity is strongest in case of production factors specific and othe material, and, also, on production factor land. In case of FMM model, heterogeneity leads to increase of production elasticity of land, while in AVT and SUMP heterogeneity leads to decrease of production elasticity of land. At the same time, the production elasticity of land, as discussed earlier, is rather low in all three models. This fact leads to a conclusion that in models that accomodate weather impacts (AVT and SUMP), as the effect of extraction of weather from the sources of unmeasured heterogeneity, the heterogeneity has a negative impact on production elasticity of land. It can be stated that the inclusion of weather effects into the sources of unmeasured heterogeneity overestimated the positive effect of unmeasured heterogeneity on the production factor land in the model FMM. Management does not have a significant effect on the weather in form of SUMPit, while it has significant and negative effect on the weather in form of average temperature, AVTit, with the value of -0.0622**. In other words, heterogeneity is in negative interaction with weather represented by average temperatures, while weather in form of the sum of precipitation (SUMPit) does not exhibit significant relation to unmeasured heteregeneity. In comparison with the model that does not include weather impacts, the effect of heterogeneity on the production elasticities has the opposite direction the models that include weather. Compare to the model where weather is represented by average temperature (model AVT), the effect of management (heterogeneity) on the production elasticity of capital is bigger in model with weather represented by sum of precipitations (model SUMP) while the effect of management (heterogeneity) on the production elasticity of land and material imputs is smaller in model with weather represented by sum of precipitations (model SUMP). Technical efficiency is significant in all estimated models. The variability of inefficiency effects is bigger than the variabilty of random error in both models that include weather and models where weather impacts are not specified. The average of TE in random parametr models reaches rather low value (setting the average TE = 54%), which indicates, that specified RPM models underestimate TE as a possible result of incorrect variable specification, or, incorrect assumptions on the distribution of the error term representing inefficiency. All estimated FMM models results in simmilar value of average TE (86-87%) with the simmilar variability of TE (cca 0,5%). Technological change has significant and positive effect on the level of TE in the model that does not specify the weather impacts (model FMM), with a value of 0,0140***, while in the models that include weather in form of average temperatures, or sum of precipitations, respectivelly, technological change has a negative effect on the level of TE (in model AVT = -0.0135***; in SUMP = -0.0114***). It can be stated, that in the model where the weather impacts were not specified, the effect of TCH on the level of TE may be distorted, because the parameter estimate implies also a systematic influence weather in the analyzed period. The effect of unmeasured heterogeneity on the level of TE is significant in all three estimated fixed management models. In models AVT and SUMP, heterogeneity has a positive effect on the level of TE (in AVT = 0.1413 and in SUMP =0,1389), while in the model that does not include weather variable the effect of heterogeneity on the level of TE is negative (in FMM =-0,1378). In models AVT and SUMP, the weather impacts were extracted from the sources of unmeasured heterogeneity, and so from its influence on the level of TE (together with other production factors weather becomes a source of measured heterogeneity). The extraction of the weather from the sources of unmeasured heterogeneity leads to change in the direction of heterogeneity effects on the level of TE from negative (in model where weather was part of unmeasured heterogeneity) to positive. The direct impact of weather on TE is only significant in case of variable AVTit, indicating that average temperatures reduce the level of TE (-0.0622**). Weather in form of sum of precipitations does not have a significant impact on the level of TE. It is evident that incorporating the effects of weather significantly changes the direction of the influence of management on the production of cereals and the direction of influence on the management of production elasticity of each factor in the final model. Analogically with the case of the influence of heterogeneity on the production elasticity of land, it is stated that the weather (included in sources of unmeasured heterogeneity) played a role in the underestimation of the impact of heterogeneity on the overall cereal production. Also, in case that weather was not extracted form the sources of unmeasured heterogeneity would play significant role in underestimation of the effect of heterogeneity on the level of TE. Based on the results of parameters estimates, and on the estimate of average values of TE and its variability, it is concluded, that the effect of inclusion of weather into defined models does not have significant direct impact on the average value of TE, however, its impact on the level of TE and the level of final crop production is pronounced via effects of unmeasured heterogeneity, from which the weather was extracted by its specification in form of AVTit a SUMPit. The analysis results confirms that it is possible to specify the impacts of weather on the shape and shift of production frontier, and, this to define this impact in a model. Results Aaso indicate that the weather reduces the level of TE and is an important source of inefficiency Czech producers of cereals (crop). The model of stochastic frontier produkction function that capture the weather impact was designed, thereby the goal of the dissertation was met. Results also show that unmeasured heterogeneity is an important feature of czech agriculture and that the identification of its sources is critical for achieving higher productivity and higher level of final output. The assumption about significant presence of heterogeneity in production technology among producers was confirmed, and heterogeneity among producers is a significant feature of cereal sector. By extracting weather from sources of unmeasured heterogeneity, the impact of real unmeasured heterogeneity (all that was not extracted from its sources) and the real impact of weather on the level of TE is revealed. If weather was not specified in a model, the TE would be overestimated. Model in form of translogarithmic multiple-output distance function well approximates the relationship between weather, technical efficiency, and final cereal production. Analysis also revealed, that the Random parameter model, which was applied in case that weather impacts were expressed as an index number, is not the suitable model specification due to underestimating of the average level of TE. The problem of underestimation of TE might be caused by wrong variable definition or incorrect assumptions about the distribution of inefficiency term. Fixed management model, on the other hand, appears as a very good tool for identification of weather impacts (in form of average temperatures and sum of precipitations in the period between planting and harvesting) on the level of TE and on the shape and shift of production frontier of czech cereals producers. The results confirm the assumption that it is important to specify weather impacts in models analyzing the level of TE of the plant production. By specification of weather impactzs in form of proper variables (AVTit, SUMPit), the weather was extracted from the sources of unmeasured heterogeneity. This methodical step will help to refine the estimate of production technology and sources of inefficiencies (or, the real inefficiency, respectivelly). That way, the explanatory power of model increase, which leads to generally more accurate estimate of TE. Dissertation has fulfilled its purpose and has brought important insights into the impact of weather on the TE, about the relationship between weather and intercompany unmeasured heterogeneity, about the effect of weather on the impact of technological change, and so the overall impact of weather specification on the shape and shift of production frontier. A model that is suitable application to define these relationships was designed. Placing the weather into deterministic part of production frontier function instead of statistical noise (or, random error, respectivelly) means a remarkable change in the methodical approach within the stochastic frontier analysis, and, due to the fact that the analysis of weather impacts on the level of TE to this extent has not yet been observed in relevant literature, the dissertation can be considered a substantial contribution to current theory of the estimate of technical efficiency of agriculture. The dissertation arose within the framework of solution of the 7th FP EU project COMPETE no 312029.

Process-Based Model of Mixed-Matrix Membrane
Čapek, P. ; Hejtmánek, Vladimír ; Veselý, M. ; Sysel, P. ; Kočiřík, Milan ; Brabec, Libor ; Zikánová, Arlette ; Bernauer, B. ; Fíla, V.
The focus of this contribution was on the formulation and verification of a process-based model of the mixed-matrix membrane that consisted of the polyimide matrix synthesized from the monomers 4,4’-(hexafluoroisopropylidene)diphtalic anhydride and 4,4’-oxydianiline, and silicalite-1. When a solution of a polyimide precursor in N,N-dimethylformamide was ready, silicalite-1 particles were dispersed in the solution and the dispersion was subsequently cast on a Teflon support plate. An initial mass ratio of silicalite-1 and polyimide was about 1:1. After solvent removal, the films were heated in subsequent steps up to 230°C for two hour. From a process-based model point of view, a key operation of the entire synthesis was slow sedimentation of silicalite particles in the viscous solution. Preliminary observation of 2D cuts through the solid membrane in a scanning electron microscope revealed that there were a lot of contacts among the silicalite particles. Therefore, a sequential (ballistic) deposition algorithm, well representing sedimentation in a low-energy environment, was used to create an off-lattice model of spatial distribution of the silicalite particles in the polyimide matrix.
Fulltext: content.csg - Download fulltextPDF
Plný tet: SKMBT_C22012102413461 - Download fulltextPDF

Drying of moist materials at low temperatures
Gregor, Jakub ; Neuberger, Pavel (advisor) ; Adamovský, Radomír (referee)
The aim of this work was to develop a literature review on the issue of drying moist materials at low temperatures. The first part is devoted to an overview of drying theory, distribution and classification of dryers and a brief analysis of the most common of them. There is also addressed the issue of the effect of temperature on the dried material and the nature of low-temperature drying. The second part of the research is concerned with the broadest current method of drying at a low temperature, which is called lyophilisation. There is mentioned principle of the method, the process of drying, processing equipment, methods and examples of activities and overview of key manufacturers. The third part is devoted to other drying techniques that can be used for effective drying at low temperature and their comparison.

Changing Attitudes by PR Message
Dupalová, Lucie ; Linhart, Zdeněk (advisor) ; Libor, Libor (referee)
The aim of this work was to transfer the attitudes of stakeholders through a text message on the social network Facebook. High context communication (along with the soft sell) and low context communication (along with the hard sell) was tested. The thesis shows the importance of communications to content usability for marketing purposes. High context communication generally affect the interviewee to favor all kinds of instrumental solutions (using soft sell and negatively excited emotions against institutional solution). While low context communication focused on explosions (hard sell and facts) influenced the interviewee to prioritize institutional solutions (insurance) of 49 % against to the promoted explosions. The investigation also tested attitudes of the two stakeholders, farmers and retailers on the issue of floods and drought and the status of institutions (state and insurance) in this issue. The thesis suggests that farmers are more trusting against institutional solutions (insurance, subsidies), and less trusting are against instrumental solution (alternative technology). The exact opposite is a group of businessmen. The meaning of this thesis is the recommended draft for a insurance communication (slogan) against these stakeholders to raise awareness about themselves.

Recovering of Company's Website
Lang, Michal ; Lohr, Václav (advisor) ; Martin, Martin (referee)
Summary Small business operating in villages usually face the problem of lack of customers, especially if they offer luxury products. The budget of such companies is often limited and therefore they cannot afford an expensive advertising. The company website is one of the few solutions that can get customers from outside the rural areas and thus create new business opportunities and increase revenues of such companies. The main goal of the thesis is to attract customers to a company website and thus help small businesses seeking customers in their difficult situation. The theoretical part starts with the basics. It describes what systems are suitable for different kind of web pages and the main part is focused on factors that influence an overall website performance. The second part shows how to achieve the stated goal on an example of a small joinery company Atyp truhlářství Lang. The company is present on the Internet since April, 2009. The work with a real website allows to compare results before and after the changes implementation. The practical part starts with an analysis of the original website. It determines strengths and weaknesses of the web and it provides suggestions for improvement. After this, the academic work deals with the implementation of suitable factors. The final chapter evaluates the original and new version of the site and represents how the made changes are reflected in the site traffic. Keywords Website design, SEO, on-page factors, off-page factors, CMS, Content Management Systems, increase site traffic Objectives and Methodology The main objective of diploma thesis is to increase the website traffic, its attractiveness for customers and thus help small companies located in rural areas to get new clients. The first part helps to achieve the stated goal by dealing with aspects influencing the overall web page performance and also provide basic knowledge related to the website design. Consequently, the sub-objective of this part is an identification of factors that significantly affect the site traffic. The second part aims to apply the gained knowledge on an example web page of small company Atyp truhlářství which faces a problem of a lack of customers. It starts with the analysis of the original website that shows its strangeness and weaknesses. This will provide an information about possible improvements. The part of authors own work aims to implement suitable factors from the theoretical part into the website design. The objective of the final part is to compare the changes made with the original design and determine if the new site solution has really improved the number of visits and its attractiveness for customer. 2 The essential information for the masters thesis elaboration were obtained from an analysis of printed sources as professional books, journals, annual reports and online resources as well. Statistical data reflecting the original website traffic were extracted from MySQL database. The new data about number of visitors were already get in friendlier form of Google Analytics outputs. In addition to that, author also discussed his academic work with website experts and used his own knowledge acquired during the university studies of information technology. Results and Conclusion The website overall performance is greatly influenced by the system on which it operates. For this reason, the literature review provides an overview about Content Management Systems and Static Site Generators. There are explained differences between these two approaches to a website design and are given recommendations about what kind of pages are suitable for each approach. The main part identifies 30 on-page and off-page factors that have a positive or negative impact on the final website traffic. The practical part consists an analysis of the examined site. It discovered the following weaknesses. The positioning is very bad in Search Engine Result Page and it is almost impossible to find the web without an exact knowledge of the company name or its location. Content can be considered as extremely poor with overall 279 words only. There were also two technical issues. The first caused a traffic data loss for the last five years due to exceeding 50MB of MySQL memory limit. The second was related to plugins deployment that used up the whole PHP memory limit. It resulted in WordPress strong unstability. The website speed test was disastrous. The small page size of 762,52kB was loaded for 4,38 seconds. An acceptable result would be less than 2 seconds. Concerning security, the site did not use secured protocol and the next risk could pose deployed plugins that are frequent targets of hacker attacks. The used template was not mobile-friendly and therefore it was difficult to browse the pages on mobile device. In addition to that the graphical appearance had a low attracting power, it was not able to adequately impress the customers. The site was visited by an average of 25 people a day in 2011. Furthermore, only 63% of visitors come from the Czech Republic. Unfortunately, more actual data could not be obtained because of the data loss. After considering of all mentioned issues above was proposed a complete website recovery with an implementation of suitable factors from literature review. The examined website is extremely static without a dynamic content and the frequency of updates is relatively low. The web pages are managed by a technical contributor and it is the reason why graphical user interface of CMS is not required. After evaluation of all previous technical, speed and security issues was selected a static site generator for the website design. 3 The important chapter is represented by implementation of suitable factors that should as a complex lead to an increase of a site traffic. First important factor is a content. The original word count of 279 words was improved to 1809 words which is 7 times more than in the past. Before writing the articles, an analysis of relevant terms were made. Those terms are included across the web content. The new articles are meaningful and they provide product details and customer reviews. Moreover, the content is structured, there are 9 unordered lists included and main titles are differentiated by importance. Each page has internal links to other subpages. The text clarity and an inclusion of relevant terms are equal to a better rank of a page. The number of images has decreased from 112 original images to selected 42 images on the new website. This is because of a very bad image quality of most old pictures. The high quality images can cause customer interest for the product, higher time on site and lower bounce rate. Meta descriptions were implemented individually for each web page with regard to the page content. The new website was accepted by a certification authority (CA) and the unsecured Hypertext Transfer Protocol was replaced by Secured Hypertext Transfer Protocol (HTTPS). It means the site is trustable and secure for browsing. There are no plugins used and therefore an attack risk is much lower. The template was tested on 17 screen resolutions. All tests were successful and the site is fully responsive. Almost 33% of customers use some mobile device to browse a web. The current web eliminates the loss of visitors coming from mobile devices. Furthermore, Google officially announced that secured and responsive websites get priority. The site speed test had two rounds. The first test can be considered as very good. The page load time was 842ms and overall page size was 1.1.MB. Nevertheless, after the compression of large files the site became even faster. The page size decreased by 30% to 771,6kB and the final load time speed up by 31% to 580ms. Currently, the website is faster than 96% of all tested domains which is a perfect score. The adjusted site speed is 7,5 times faster than the original speed. No flash, advertisement or other disruptive elements are available on the web. The web page is newly available on Google+, Pinterest and Twitter. These factors are able to boost direct page traffic. The design is clean and simple just to avoid leaving customers confused. The readability is also very good. Combination of black/blue text on the white background or white text on the black/blue background doesnt cause any readability issues. Social buttons and a quick company contact is present on each page in header and footer section. Another change was made in traffic measurement. The website started to use Google Analytics for tracking visitors. The actual traffic data are more accurate and the possibility of data loss is reduced. The main goal of diploma thesis was to improve the website traffic. The web page was measured from 01.12.2015 to 29.02.2016. The average site traffic was 23,0 visits a day in December 2015. This number reflects the original site traffic which was around 25 visits a day with a decrease of 8%. The biggest change in traffic development was found between 08.01.2016 to 13.01.2016 when the average site traffic was 77,2 visits a day. Those changes are explained by an influence of social media. Author has written a post about Atyp truhlářství on Facebook on 8th January 2016. The post was shared by 8 people and it attracted many people to visit the website. 4 From January 14th to the end of the month, the average daily traffic was 32,3 visits. The last month was noted slightly higher traffic of 32,6 visits a day. The comparison of data from December 2015 and from February 2016 shows a visible increase in number of visits in February 2016 where the traffic was higher by 41,7%. There is a positive increasing trend in a number of visits since the beginning of December 2015. Moreover, majority of visitors 81,3% come from the Czech Republic and it is a better result than by the original web pages with 62% only. The recovery of a small joinery website atyptruhlarstvi.cz was successful. It improved the website traffic and many other aspects as content, speed, security, responsiveness, social media etc. The web design itself and implemented factors can be considered as crucial elements that influence the final number of visits. For this reason, the made changes on a web page can really help small business in rural areas to get new customers. There were also identified factors that affect an overall website performance with an emphasis on a positive site traffic development. An overview about different website design approaches is provided as well. References SEARCHMETRICS. Search Ranking Factors and Rank Correlations: Understand how the deck is stacked [online]. San Mateo, 2015. Accessible from: http://www.searchmetrics.com/wpcontent/uploads/Ranking-Factors-2015-Whitepaper-US.pdf COSTELLO, Vic, Susan A YOUNGBLOOD a Norman YOUNGBLOOD.Multimedia foundations: core concepts for digital design. New York: Focal press, Taylor & Francis group, 2013. ISBN 978-0-240-81394-3. FIELDING, Jonathan. Beginning responsive web design with HTML5 and CSS3 / Jonathan Fielding. New York, New York: Apress, 2014. Experts voice in Web development. ISBN 9781430266945. MITCHELL, Melanie. Standing out with Seo: Expert advice from Melanie Mitchell (collection). United States: FT Press, 2013. ISBN 978-0-13-344320-2. BROWN, Bruce C. How to build your own web site with little or no money: the complete guide for business and personal use. Ocala, Fla.: Atlantic Pub. Group, c2010. ISBN 1601383045. ELMANSY, Rafiq. Search engine optimization. Indianapolis, IN: John Wiley & Sons, Inc., 2013. Teach yourself visually. ISBN 1118470664.

Multi-Conductor Model of Communication over Outdoor Power Lines
Franek, Lešek ; Steinbauer, Miloslav (referee) ; Vozňák, Miroslav (referee) ; Fiedler, Petr (advisor)
PLC - power line communication is not new. It has been known for many years. But It never be used in massive scale. There were only sporadic applications, for example ripple control system HDO used in the Czechoslovakia. PLC currently experiencing a renaissance thanks to the advent of Smart Grid. PLC offering relatively low bit rates and relatively unreliable transmission, but these disadvantages compensates very low costs to build a communication infrastructure and it offers specific functionalities for Smart Grid. The question is whether the declared parameters will be met in the real world. This thesis tries to find an answer.