| |
| |
|
Woman education after surgery for malignant of female geniatale
ELLINGEROVÁ, Zdeňka
The theme of my bachelor´s thesis is Education of women after surgery for malignant disease of the genitals. In the thesis I write about care and selfcare of women after gynecological surgery. I find out in whitch part of selfcare are women educated. The thesis is divided into chapters to clarify all technical terms. The first chapter is about anatomy of female genitals and examinig methods in gynecology. In the next chapter I write about classification of malignant disease of female genitals, I describe their specifics, manifestations, examinig methods and possible treatment. Some of gynecological malignant disease are operable, so I describe surgical approaches too. Further are described oncology centers, thein equipment and how many are there in the Czech republic. The next chapter is about a role of midwife in care of women after surgery for malignant disease of the genitals, and of course a psychological approach with oncology patients, becouse oncology disease is a very dificult life situation. And it is midwife´s mission to help these women. All of midwifes should know this psychological approach. The last chapter is about nursing, nursing process in care of oncological patients and about education. I describe an education about care of surgical wound and protect of infection, diet and emptying, pain and its relief, movement and sexual life after a surgery. The objectiv of my thesis was to find out chat women knouw about selfcare, if they understand the informations. I used qualitative method structured interview, in the research part of thesis. The interview I did with 8 patients of gynekology department in a Hospital České Budějovice a.s. the structured interview have 13 questions. The patients are different ages, have different level of education and different surgery approaches. I set 3 research questions: Want the women to know more information about their health condition? Are the informations of midwifes undestandable or very professional? Observe the women recommendations of midwifes? Eight interviews show that the rate of the submitted informations is sufficient, women know how to take care of yourself. And they know, if they need anything can ask a midwife. On the second did not answer all women equally. Two of the women said, they did not understand all of the midwifes said. They wanted less technical terms. Six of the women understood all. The third question answered all women equally. They observed the recommendations of midwifes. The research shows women are satisfied with nursing care after surgery. The level of informations is enough to care of yourself. They are satisfied with midwifes´care on the gynaecological department. All af women are educated about specifics of their type of surgery, care of surgery wound, hygiene, protect of infection, diet, emptying, sexual life after release from hospital. I think this tehsis can be used as an educational material for midwifes or students of midwife.
|
|
Small mammals in diet of barn owl in the Eastern Meditarranean
Šindelář, Jiří ; Horáček, Ivan (advisor) ; Anděra, Miloš (referee)
The extensive material of skeletal remains of mammals from a diet of barn owl in the eastern Mediterranean has been processed and evaluated with different techniques of chorological and morphometric analysis. At least 8400 individuals of 45 species of insectivores, rodents and bats were found in our total collection of samples, which represents a significant portion of fauna of the region. We have evaluated a chorological composition of the taphocoenoses and the interregional differences, manifested primarily by differences in the representation of satellite and accessory elements. We found a highly significant impoverishment of the isolated island taphocenoses (Cyprus, Karpathos, partly on Crete), where Cricetidae, Arvicolidae, C. leucodon etc. are missing. On the other hand the essential part of the dominance structure takes up the Rattus rattus, which acts here as an invasive species, significantly more successful than in the ragged continental contexts. The species diversity of the examined samples is positively correlated with the geographic latitude (taphocenoses of the northern regions are significantly richer) and negatively with the island effect and the degree of aridization. The morphometric analysis of the three most abundant species of Soricidae within the studied region showed...
|
|
Optimalization of material flow in automotive industry
Kolář, Tomáš ; Jirsák, Petr (advisor) ; Vinš, Marek (referee)
This master thesis is focussed on optimalization of material flow in an automotive company. First part introduce theoretical background. Automotive industry and its actual trends on global markets. Follows short introduction of the company where project of this thesis was executed. Main theoretical part describes concept of lean management, its tools in practical examples, but it is also focussed on philosophical approach to the work and mindset of the company. Follows the aplication part based on theoretical background. The whole project of this master thesis is focussed on specific area called PC store. At first this area is showed in context of overall material flow. Shortly there are introduced processes and areas where full material packaging flows. Follows deeper analysis and optimalization of PC store itself. There are three approaches of stock and lead time reduction applied. Last part shows the comparison of initial and future state including performed changes.
|
|
Changes in structure and phase composition in the surface of tram rail
Švábenská, Eva ; Roupcová, Pavla ; Schneeweiss, Oldřich
We have investigated structure and phase composition of surface layer of tram rails after long time running and the results were compared with those obtained on the original part of material. Changes due to effects of severe plastic deformation together with thermal shocks by friction process were expected. The information about structure and phase composition was obtained by optical and scanning electron microscopy, X-Ray Powder Diffraction, Mössbauer Spectroscopy and Glow Discharge Emission Spectroscopy (GDOES) and this was completed by microhardness measurements. The results show that the surface layer in comparison with the original material exhibits important changes in grain structure, an increase in microhardness and high content of iron oxide and hydrooxides. According to the depth profile of the chemical composition measured by GDOES there is an increase in carbon content in the surface layer which can be effect of up-hill diffusion.
|
|
STRAIN ENGINEERING OF THE ELECTRONIC STRUCTURE OF 2D MATERIALS
del Corro, Elena ; Peňa-Alvarez, M. ; Morales-García, A. ; Bouša, Milan ; Řáhová, Jaroslava ; Kavan, Ladislav ; Kalbáč, Martin ; Frank, Otakar
The research on graphene has attracted much attention since its first successful preparation in 2004. It possesses many unique properties, such as an extreme stiffness and strength, high electron mobility, ballistic transport even at room temperature, superior thermal conductivity and many others. The affection for graphene was followed swiftly by a keen interest in other two dimensional materials like transition metal dichalcogenides. As has been predicted and in part proven experimentally, the electronic properties of these materials can be modified by various means. The most common ones include covalent or non-covalent chemistry, electrochemical, gate or atomic doping, or quantum confinement. None of these methods has proven universal enough in terms of the devices' characteristics or scalability. However, another approach is known mechanical strain/stress, but experiments in that direction are scarce, in spite of their high promises.\nThe primary challenge consists in the understanding of the mechanical properties of 2D materials and in the ability to quantify the lattice deformation. Several techniques can be then used to apply strain to the specimens and thus to induce changes in their electronic structure. We will review their basic concepts and some of the examples so far documented experimentally and/or theoretically.
|
|
ELECTRON BEAM REMELTING OF PLASMA SPRAYED ALUMINA COATINGS
Matějíček, Jiří ; Veverka, J. ; Čížek, J. ; Kouřil, J.
Plasma sprayed alumina coatings find numerous applications in various fields, where they enhance the properties of the base material. Examples include thermal barriers, wear resistance, electrical insulation, and diffusion and corrosion barriers. A typical structure of plasma sprayed coatings, containing a multitude of voids and imperfectly bonded interfaces, gives them unique properties - particularly low thermal conductivity, high strain tolerance, etc. However, for certain applications such as permeation barriers or wear resistance, these voids may be detrimental.\nThis paper reports on the first experiments with remelting of plasma sprayed alumina coatings by electron beam technology, with the purpose of densifying the coatings and thereby eliminating the voids. Throughout the study, several parameters of the e-beam device were varied - beam current, traverse velocity and number of passes. The treated coatings were observed by light and electron microscopy and the thickness, structure and surface morphology of the remelted layer were determined and correlated with the process parameters. Based on the first series of experiments, the e-beam settings leading to dense and smooth remelted layer of sufficient thickness were obtained. In this layer, a change of phase composition and a marked increase in hardness were observed.\n
|
|
Black Chromia Coatings on Metal Tubes for the Solar Collectors
Brožek, V. ; Mastný, L. ; Novák, M. ; Vilémová, Monika ; Kubatík, Tomáš František
This paper describes the results of the first phase of the study preparation, structure and properties of coatings modification of black chromium oxide on copper, aluminium, iron and zirconium tubes for solar collectors. The coatings are prepared by plasma spraying of liquid chromate method which is known as liquid precursor plasma spraying. Coatings have the function of an energy trap for thermal radiation wavelengths of 1 μm – 3 μm i.e. in the IR region. At the same time, the coating increases the corrosion resistance of metal substrates. The nanometric structure and thickness of the coating depend of the feeding distance and the concentration of chromate precursors. For the deposition of nanometric splats of melt chromiumIII oxide, a new type of feeder that injects precursors into the water stabilized thermal plasma produced by the WSP® generator has been\ndeveloped.\n
|
|
Sorption and Stabilization of Metals/Mettalloids by Innovative Synthesized Sorbent Amochar.
Ouředníček, P. ; Trakal, L. ; Komárek, M. ; Pohořelý, Michael
Remediation of contaminated soil which is based on stabilization and immobilization of potential\nhazardous substance by sorption materials has been studied intensively nowadays. Biochar – activated organic carbon belongs to this group of stabilizing agents which can adsorb wide range of contaminants, including metals/metalloids. Surface area of the biochars is quite large in general and functional groups (e.g. COO–) can form chelates or alkaline elements on the surface, which is represented by cation exchange capacity. Altogether with the high pH values (7.00 – 10.00), biochars are quite effective sorbents and can adsorb metals/metalloids from the solution (ground water), especially in acidic soils (in the environments affected by intensive mining activities). Sorption\neffectiveness can be increased (especially for As (V) or Cr (VI) sorption) by modification of biochar by various types of secondary oxides. Innovative sorbent AMOchar (AMO + biochar) has been synthesized currently. The product was prepared by adding of biochar to the reaction solution during amorphous manganese oxide (AMO) synthesis. The AMOchar was formed mainly by Mn-oxalates which had coated surface of the pristine biochar. AMOchar composite was able to remove significantly higher amounts of various metal(loid)s from the solution despite the rather high pH of the material. Sorption effectiveness was high not only in case of Pb (II) sorption (almost 99%), and Cd(II) (51.2%), but also a very high amount of As(V), 91.4%. Additionally, both AMOchar composite was able to reduce Mn leaching. This can avoid potential post-contamination caused by the dissolution of less stable Mn-oxalates as observed in the pure AMO.
Fulltext: content.csg -  PDF
Plný tet: SKMBT_22316111113040 - PDF
|
guest ::
