|
Study of behavior of concrete and cement based composite materials exposed to high temperatures
Bodnárová, L. ; Horák, D. ; Válek, J. ; Hela, R. ; Sitek, Libor
The paper describes possibilities of observation of behaviour of concrete and cement based composite material exposed to high temperatures. Nowadays, for large-scale tests of behaviour of concrete exposed to high temperatures, testing devices of certified fire testing stations in the Czech Republic and surrounding states are used. These tests are quite expensive. For experimental verification of smaller test specimens, a testing device was built at the Technical University in Brno, where tests of thermal loading of concrete tests specimens of various sizes can be carried out (dimensions up to 800 x 800 x 800 mm or slabs up to 1100 mm of length). The testing device opens new ways of observation of behaviour of concrete and cement based composite materials exposed to high temperatures as well as preparation of specimens for observation of interaction of water jet and concrete degraded by action of high temperatures.
Fulltext: content.csg -  DOC
Plný tet: UGN_0398264 - DOC
|
|
Use of Interest Rate Models for Interest Rate Risk Management in the Czech Financial Market Environment
Cíchová Králová, Dana ; Arlt, Josef (advisor) ; Cipra, Tomáš (referee) ; Witzany, Jiří (referee)
The main goal of this thesis is to suggest an appropriate approach to interest rate risk modeling in the Czech financial market environment in various situations. Three distinct periods are analyzed. These periods, which are the period before the global financial crisis, period during the financial crisis and in the aftermath of the global financial crisis and calming subsequent debt crisis in the eurozone, are characterized by different evaluation of liquidity and credit risk, different relationship between financial variables and market participants and different degree of market regulations. Within this goal, an application of the BGM model in the Czech financial market environment is crucial. Use of the BGM model for the purpose of predicting a dynamics of a yield curve is not very common. This is firstly due to the fact that primary use of this model is a valuation of interest rate derivatives while ensuring the absence of arbitrage and secondly its application is relatively difficult. Nevertheless, I apply the BGM model to obtain predictions of the probability distributions of interest rates in the Czech and eurozone market environment, because its complexity, direct modeling of a yield curve based on market rates and especially a possibility of parameter estimation based on current swaptions volatilities quotations may lead to a significant improvement of predictions. This improvement was also confirmed in this thesis. Use of swaptions volatilities market quotations is especially useful in the period of unprecedented mone- tary easing and increased number of central banks and other regulators interventions into financial markets that occur after the financial crisis, because it reflects current market expectations which also include future interventions. As a consequence of underdevelopment of the Czech financial market there are no market quotations of Czech koruna denominated swaptions volatilities. I suggest their approximations based on quotations of euro denominated swaptions volatilities and also using volatilities of koruna and euro forward rates. Use of this approach ensures that predictions of the Czech yield curve dynamics contain current market expectations. To my knowledge, any other author has not presented similar application of the BGM model in the Czech financial market environment. In this thesis I further predict a Czech and Euro area money market yield curve dynamics using the CIR and the GP models as representatives of various types of interest rates models to compare these predictions with BGM predictions. I suggest a comprehensive system of three criteria, based on comparison of predicti- ons with reality, to describe a predictive power of selected models and an appropria- teness of their use in the Czech market environment during different situations in the market. This analysis shows that predictions of the Czech money market yield curve dynamics based on the BGM model demonstrate high predictive power and the best 8 quality in comparison with other models. GP model also produces relatively good qua- lity predictions. Conversely, predictions based on the CIR model as a representative of short rate model family completely failed when describing reality. In a situation when the economy allows negative rates and there is simultaneously a significant likelihood of their implementation, I recommend to obtain predictions of Czech money market yield curve dynamics using GP model which allows existence of negative interest rates. This analysis also contains a statistical test for validating the predictive power of each model and information on other tests. Berkowitz test rejects a hypothesis of accurate predictions for each model. However, this fact is common in real data testing even when using relatively good model. This fact is especially caused by difficult fulfilment of test conditions in real world. To my knowledge, such an analysis of the predictive power of selected interest rate models moreover in the Czech financial market environment has not been published yet. The last goal of this thesis is to suggest an appropriate approach to obtaining pre- dictions of Czech government bonds risk premium dynamics. I define this risk premium as a difference between government bond yields and fixed rate of CZK IRS with the same length. I apply the GP model to describe the dynamics of this indicator of the Czech Republic credit risk. In order to obtain a time series of the risk premium which are necessary for estimation of GP model parameters I firstly estimate yield curves of Czech government bonds using Svensson model for each trading day since 2005. Resulting si- mulations of risk premium show that the GP model predicts the real development of risk premiums of all maturities relatively well. Hence, the proposed approach is suitable for modeling of Czech Republic credit risk based on the use of information extracted from financial markets. I have not registered proposed approach to risk premium modeling moreover in the Czech financial market environment in other publications.
|
|
STRAIN ENGINEERING OF THE ELECTRONIC STRUCTURE OF 2D MATERIALS
del Corro, Elena ; Peňa-Alvarez, M. ; Morales-García, A. ; Bouša, Milan ; Řáhová, Jaroslava ; Kavan, Ladislav ; Kalbáč, Martin ; Frank, Otakar
The research on graphene has attracted much attention since its first successful preparation in 2004. It possesses many unique properties, such as an extreme stiffness and strength, high electron mobility, ballistic transport even at room temperature, superior thermal conductivity and many others. The affection for graphene was followed swiftly by a keen interest in other two dimensional materials like transition metal dichalcogenides. As has been predicted and in part proven experimentally, the electronic properties of these materials can be modified by various means. The most common ones include covalent or non-covalent chemistry, electrochemical, gate or atomic doping, or quantum confinement. None of these methods has proven universal enough in terms of the devices' characteristics or scalability. However, another approach is known mechanical strain/stress, but experiments in that direction are scarce, in spite of their high promises.\nThe primary challenge consists in the understanding of the mechanical properties of 2D materials and in the ability to quantify the lattice deformation. Several techniques can be then used to apply strain to the specimens and thus to induce changes in their electronic structure. We will review their basic concepts and some of the examples so far documented experimentally and/or theoretically.
|
|
ELECTRON BEAM REMELTING OF PLASMA SPRAYED ALUMINA COATINGS
Matějíček, Jiří ; Veverka, J. ; Čížek, J. ; Kouřil, J.
Plasma sprayed alumina coatings find numerous applications in various fields, where they enhance the properties of the base material. Examples include thermal barriers, wear resistance, electrical insulation, and diffusion and corrosion barriers. A typical structure of plasma sprayed coatings, containing a multitude of voids and imperfectly bonded interfaces, gives them unique properties - particularly low thermal conductivity, high strain tolerance, etc. However, for certain applications such as permeation barriers or wear resistance, these voids may be detrimental.\nThis paper reports on the first experiments with remelting of plasma sprayed alumina coatings by electron beam technology, with the purpose of densifying the coatings and thereby eliminating the voids. Throughout the study, several parameters of the e-beam device were varied - beam current, traverse velocity and number of passes. The treated coatings were observed by light and electron microscopy and the thickness, structure and surface morphology of the remelted layer were determined and correlated with the process parameters. Based on the first series of experiments, the e-beam settings leading to dense and smooth remelted layer of sufficient thickness were obtained. In this layer, a change of phase composition and a marked increase in hardness were observed.\n
|
|
Satisfaction of women in labour with nursing care during childbirth.
KLÍMOVÁ, Magdaléna
This dissertation investigates the level of satisfaction among expectant mothers with the care services provided during childbirth. Satisfaction reflects a subjective perception of an expectant mother in meeting her needs during childbirth. The feeling of satisfaction is very personal, however, evaluation of the care provided needs to be determined and not ignored. It is important for expectant mothers that the health care professionals present as empathic, friendly, co-operative, and tactful.Theoretical part was developed from evidence-based literature and available findings related to this problematic. There is a description of a childbirth process including a midwife's role during the individual stages of childbirth and options for pain management. Other chapters focus on midwife's approach toward an expectant mother and factors which influence the level of satisfaction during childbirth. Dissertation's aim was to determine whether the expectant mothers were more satisfied in smaller maternity departments, and to evaluate the way a midwife may influence the mother's satisfaction. There were two hypotheses stated and verified by a statistical testing. Hypothesis No. 1: Expectant mothers are more satisfied in smaller maternity departments than larger ones. Hypothesis No. 2: The level of satisfaction is influenced by midwife's empathic approach. Practical part focused mainly on a midwife's approach toward expectant mother. A quantitative research was implemented in form of questionnaires. The research sample constituted of expectant mothers from four postpartum departments in the Czech Republic. In total the sample included 215 expectant mothers, 109 from smaller facilities and 106 from larger maternity departments. In terms of the overall level of satisfaction with their midwife during the childbirth process, 89% of expectant mothers from smaller maternity departments and 83% of expectant mothers from larger departments stated they were satisfied. Conversely, 11% of respondents from smaller facilities and 17% of respondents from larger facilities were dissatisfied. Based on research analysis comparing the level of satisfaction of expectant mothers from smaller and larger maternity departments the hypothesis no. 1 "Expectant mothers are more satisfied in smaller maternity departments than the larger ones" did not show as statistically significant and was rejected. Nonetheless, the questionnaire responses clearly showed that empathic approach of a midwife influenced expectant mother's satisfaction. Statistical testing demonstrated a significant correlation between an expectant mother's satisfaction and empathic approach of a midwife. The second hypothesis "The level of satisfaction is influenced by midwife's empathic approach" was accepted.The research findings may serve as a guiding material for the midwives in order to provide a high quality care to expectant mothers during the childbirth process. They may also be utilised by future midwives who are in undergraduate preparation for the profession, or those professionals who contribute in any way during the childbirth process. Additionally, the research findings may be presented at conferences designated for midwives.
|
|
Sorption and Stabilization of Metals/Mettalloids by Innovative Synthesized Sorbent Amochar.
Ouředníček, P. ; Trakal, L. ; Komárek, M. ; Pohořelý, Michael
Remediation of contaminated soil which is based on stabilization and immobilization of potential\nhazardous substance by sorption materials has been studied intensively nowadays. Biochar – activated organic carbon belongs to this group of stabilizing agents which can adsorb wide range of contaminants, including metals/metalloids. Surface area of the biochars is quite large in general and functional groups (e.g. COO–) can form chelates or alkaline elements on the surface, which is represented by cation exchange capacity. Altogether with the high pH values (7.00 – 10.00), biochars are quite effective sorbents and can adsorb metals/metalloids from the solution (ground water), especially in acidic soils (in the environments affected by intensive mining activities). Sorption\neffectiveness can be increased (especially for As (V) or Cr (VI) sorption) by modification of biochar by various types of secondary oxides. Innovative sorbent AMOchar (AMO + biochar) has been synthesized currently. The product was prepared by adding of biochar to the reaction solution during amorphous manganese oxide (AMO) synthesis. The AMOchar was formed mainly by Mn-oxalates which had coated surface of the pristine biochar. AMOchar composite was able to remove significantly higher amounts of various metal(loid)s from the solution despite the rather high pH of the material. Sorption effectiveness was high not only in case of Pb (II) sorption (almost 99%), and Cd(II) (51.2%), but also a very high amount of As(V), 91.4%. Additionally, both AMOchar composite was able to reduce Mn leaching. This can avoid potential post-contamination caused by the dissolution of less stable Mn-oxalates as observed in the pure AMO.
Fulltext: content.csg -  PDF
Plný tet: SKMBT_22316111113040 - PDF
|
|
Plasma spraying from liquids: plasma liquid interaction and coating build up
Tesař, Tomáš ; Mušálek, Radek ; Medřický, Jan ; Lukáč, František
Plasma spraying from liquid feedstocks is a rapidly developing field of thermal spraying since the coatings prepared from liquids exhibit some unique features, such as high hardness, thermal shock resistance or low thermal and electric conductivity. The key factor influencing the final coating character and properties is the input material which may be in the form of a suspension or a solution. Parameters of the selected suspension (solids concentration, viscosity, surface tension, chemical composition, etc.) or solution (concentration, etc.) determine its interaction with the plasma jet which strongly influences the coating buildup. This proceeding introduces the problematics of the interaction between the liquid feedstock material with the plasma jet and presents the way of evaluation of the coating buildup.
|
|
Analysis breeding of milk cattle on the chosen biofarme
Plášková, Pavlína ; Toušová, Renata (advisor) ; Ducháček, Jaromír (referee)
The aim of this thesis is to evaluace the conditions of dairy cattle breeding in ecological agriculture and to compare them with concrete values taken from the chosen ecological farm Bílčice, which has been part of ecological agriculture since 2011 and which is focused on czech fleckvieh breeding and bio milk production. The first part deals with dairy cattle breed characteristic, main objectives and ecological agriculture principals, welfare problems, breed cattle and utility control, housing technology, nutrition and feeding, mechanical milking technology, milk production, reproduction, health condition and breeding economy. The practical part contains the rating of milk yield index (milk production, % proteins, % fat) and reproduction index ( meantime, perioda service, insemination index and after first parturition percentage). 650 pieces of cos were stabled at farm, from that 200 pices of dairy cos were mostly czech fleckvieh. Monitoring was made in 2013. Dayily milk production was around 2 750 kg. The milk utility for lactacion was in 2013 6 100 kg of milk, 3,89 % fat and 3,34 % proteins. The dairy cos were free stabled with high bedding, They were mechanically milked twice a day in herringbone parlours. Milk is being delivered once in twodays to Olma dairy. Cows are regularly driven out to pasture in summer feeding period. They are extra fed with 10 kg of clover silage and 6 kg of scarp (barely, wheat, triticale). Cows stays in stables for winter time. The ration consists of 45 kg of clover silage, 6 kg of scarp, 2 kg of lupine and 1 kg of corn in first time of lactacion. The cow utility in transitional form of economy at farm Bilcice was 7 477 kg of milk in 2010, a value in the Czech Republic was 7 726 kg of milk. After entering the ecological agriculture in 2013 milk yield at the farm decreased on 6 100 kg of milk and the average value in the Czech Republic increased to 8 370 kg of milk. The cow utility in transitional form was 4,03 % fat in 2010 and 3,89 % in 2013 (ecological agriculture). A diference between 2010 and 2013 is 0,14 %. Proteins were 3,39 % in 2010 and 3,34 % in 2013. There was average value for every reproduction index. The service period was 96 days and the meantime was 400 days, the insemination index was 1,8 and the after first parturition percentage was 54,2 %.
|
|
Arctic tundra dendrochronology
Lehejček, Jiří ; Svoboda, Miroslav (advisor) ; Monika, Monika (referee)
Historically unprecedented environmental change in the Arctic ecosystems is often given into the context of its past and possible future development. In the region where instrumental meteorological observations are scarce archives need to be investigated in order to address this issues. The comprehensive synthesis one of the archives: long-live circumpolar evergreen Juniperus communis L. shrub is presented here. 20 individuals from southwest Greenland were investigated at the cell anatomy level to understand the ecology of the species and unhide its potential for environmental and climate reconstructions. The findings are as follows:
i) Stop of exponential cross-sectional conduit-lumen widening with increasing age is in contrast with conduit-lumen nature of trees. This indicates that shrubs do not need to saturate their water and nutrient demands via traits of classical hydraulic conductivity law but rather developed different mechanisms. Extreme weather conditions result in prostrate growth form. However, different weather factors probably influence shrub growth differently: While snow and wind act mechanically (a), temperature influences the form of growth physiologically (b). a) So long as the young shrub stem has high resilience to bend back to an upright position after snow melt and so long as it can withstand the wind during the vegetation season it most likely grows upright and the conduit-lumens widen. b) Temperature, resp. freeze-thaw events are responsible for the shrubs preference of safety (finite size of conduit-lumens) over hydraulic efficiency, thus not allowing for more primary growth. All of these (and other) factors are apparently working together and the transition of vertical to more horizontal growth is gradual. As a consequence, the conduit-lumen sizes may not have to be further increased (due to ecophysiological restrictions possibly also must not) because water is no longer transported against gravity.
ii) Observed age/growth trend has to be taken into consideration for further employment of the wood anatomical parameter in paleoenvironmental studies. That is, shrub cell parameters can only be used for this purposes if correctly detrended. This allows for more accurate as well as longer reconstructions because youth trend was often neglected in reconstructions based on shrub annual-rings.
iii) The south-western Greenland Ice-Sheet (GrIS) melt rates reconstruction is presented for the whole 20th century. This part of GrIS is considered as the most active. According to the presented reconstruction current GrIS melt rates are not uncommon for the last century being comparable to first decades of 20th century. This finding is particularly important contribution to the debate on Atlantic meridional overturning circulation (AMOC). Too high fresh water inputs into the Northern Atlantic from GrIS melting may slow down or even stop the AMOC which would result in more continental climate in Europe. Presented results indicate that this threshold lies higher than observed current melt rates of GrIS.
Fascinating Juniperus comunnis species has shown to be able to address many ecological as well as environmental open questions and due to its longevity and abundant distribution has a great potential to become an important player in the Arctic research.
|
|
Nutritional analysis and optimization of breeding of selected species of edible insects under conditions of the Czech Republic with regard to human health
Adámková, Anna ; Kouřimská, Lenka (advisor)
All over the world, the edible insects are considered a highly nutritious food with high protein and fat content. However, the nutritional value of insect is not constant. It can be affected by species, developmental stage, rearing technology or nutrition.
Therefore, this thesis was aimed at obtaining the selected nutritional value of edible insects. Analyses were focused on the determination of the crude protein content, fat content, fatty acid profile and sterols in selected species of edible insects, which can be commonly reared in the Czech Republic. At the same time we also analysed samples of insects reared on the island of Sumatra to evaluate the influence of the climate on the nutritional value. The main aim of the thesis was the determination of optimal breeding conditions, developmental stages and feed rations for obtaining good production of insects with nutritional properties suitable for human nutrition. The analyses showed a high nutritional value of selected insect species, but also confirmed the significant differences in the content of individual nutrients between different species depending on the climate conditions and developmental stage. Comparing the fat and crude protein content in edible insects and other conventional sources of meat it has been found, that the examined insect is similar to beef concerning the fat and crude protein content. The results obtained are the basis for determining the appropriate rearing conditions and developmental stages for obtaining insect with the desired nutritional properties for human nutrition.
|
guest ::
