|
|
Garage with Fuel Station
Borkesz, Michael ; Pilgr, Milan (referee) ; Barnat, Jan (advisor)
Bachelor thesis presents the structural design of a load bearing steel structure of garage with roof construction of adjoining fuel station. The object is located in periphery area of Uherske Hradiste city, near Jarosov district. The ground plan dimensions are: 36 x 32 meters garage hall; 20 x 20 meters fuel station roofing. Heights of both construction tops are same – 10 meters above the surface. As the main material supporting elements was designed steel S355. The main supporting structure compose of trusses, which are hinged supported by columns. The roof deck is heat insulated, supported by purlins. The wall deck is simillar to roof deck, except of the front wall, which is partly composed of glass casing. At the both sides of garage hall are designed gates for vehicles. The roof deck of fuel station roof construction composes from one single trapezoidal sheet, also supported by purlins. The work contains structural design of individual elements, including mutual joints and anchoring. Calculations are performed according to standards of EN.
|
|
|
Sports center
Rohlena, Jan ; Vitík, Jan (referee) ; Daněk, Lukáš (advisor)
The objective of the present thesis is to design a sports center and provide the relevant design documentation for it. The designed building is situated on a flat plot in Hradec Králové which is intended as a building plot or a sports/relax area. The designed sports center is a two-level building without cellar with a flat roof. The building foundations are designed as foundation strips, mainly from plain concrete. The external, loadbearing, and partition walls are designed with clay blocks POROTHERM. The floor structure is designed with prestressed concrete floor slabs SPIROLL. The thermal insulation is resolved with ventilated facade with facade panels. CEMBRIT SOLID. The building is divided into three individual functional units with one shared entrance. It consists of two sports halls with facilities designed for sportsmen and staff, and a gym together with the facilities for costumers. A restaurant and a kitchen are situated in the second floor.
|
|
|
Roof structure of construction for social purposes
Bašista, Ján ; Melcher, Jindřich (referee) ; Karmazínová, Marcela (advisor)
The work treats the static recalculation of an existing roof structure of a construction for social purposes and proposes two variants of the design of a new roof structure. The construction has a rectangular ground plan of 30 m x 47 m and the roof structure is placed on the load bearing circumference concrete walls. Except for the load constituted by the function of the construction and by the climatic area, an extra load of 2 tons suspended at any place of the structure is considered because of the special requirement of working and technological equipment. The variant no. 1 is designed from the steel S355. The variant no. 2 is designed as a combination of the wood GL24h and the aluminium EN-AW 5083. Both of the variants have 11 transverse load bearing girders. The purlins are perpendicular to the girders and are placed on them. Stiffness is secured by roof stiffeners.
|
|
|
Steel load-carrying structure of production hall with bridge crane
Štulrajterová, Terézia ; Melcher, Jindřich (referee) ; Karmazínová, Marcela (advisor)
This bachelor thesis deals with the design and assessment of a steel load-bearing structure of a two-aisle production hall. That hall has a rectangular ground plan of a width 32 m (20 + 12 m) and lenght 54,54 m (9 modules distanced 6 m from each other). The main aisle is 10 m high and inside is located a overhead crane with carrying capacity 5 t. The second aisle is used as a storage area for materials that have already been produced. The skeleton of production hall is made of a ten transversal bindings. Lattice trusses are hinged mounted on constraint pillars of solid poles. The hall is situated in the north of the Czech Republic in the city of Děčín.
|
|
|
Storage hall
Osyková, Martina ; Šulák, Pavel (referee) ; Laníková, Ivana (advisor)
The master thesis ´´Storage hall” deals with designing of selected elements prefabrikated skeleton hall. Discussed elements are truss, beam, girder, column and prefabricate footing. Within above mentioned elements was carried out static analysis, design of reinforcement and reinforcement drawings. Analysis of internal forces for columns and prefabricate footing was carried out with usage of the program Scia Engineer, 3D model of the whole object was created. Analysis of internal forces for the rest of elements was carried out with help of manual calculation. Those elements were designed with consideration of ultimate limit state. Serviceability limit state assessment was carried out within the truss.
|
|
|
Detached house with copycentre
Haltmar, Lukáš ; Kalánek, Jiří (referee) ; Ostrý, Milan (advisor)
The subject of my thesis is the design non-celar two-storey family house with a shop of copy requirements and copycentr. The building is built in a quiet village in the Štíty near Šumperk, in the cadastral Štíty-město. The house is designed for 4 people. Access to the building and premises are wheelchair accessible. The support structures are built of aerated concrete blocks insulated slabs of mineral wool. House is built on a strip of plain concrete. The roof is a truss, saddle. The project is the work of the seminar focused on assessment of structures in terms of thermal and acoustic techniques.
|
|
|
Industrial building
Nitková, Jana ; Buchta, Stanislav (referee) ; Sýkora, Karel (advisor)
The bachelor thesis contains design of steel one-aisle industrial building with span 24 m, lenght 63 m and height of the holder of a crane track girder 8,7m. There are two overhead cranes with load capacity 12,5 tons and 32/8 tons in industrial building. The structural material hall is made of steel S 235. The drawings includes transverse and longitudinal section, platform and manufacturing drawing of continuous truss.
|
|
|
Design of precast concrete hall
Prášek, Martin ; Nováček, Jan (referee) ; Zich, Miloš (advisor)
Master’s thesis describes the structural design and static analysis of selected elements of prefabricated reinforced concrete industrial building, that will be used as storage hall. Purpose of thesis is elaboration of assembly drawings of the project documentation and drawings of formwork and reinforcement assembly of selected elements. Calculations were performed in computer programs for static analysis SCIA Engineer 16, IDEA StatiCa and FIN EC. Drawing were made in programs Allplan 2016 and AutoCad 2015.
|
|
|
Two Bay Industrial Hall
Hetmer, Jakub ; Buchta, Stanislav (referee) ; Bajer, Miroslav (advisor)
This bachelor´s thesis "two-bay industrial hall" is processed in the form of project documentation according to applicable regulations. It is a steel hall. It is designed as a single-storey, two-bay with a gable roof. The hall is located in Brno. Main structure consists of planar cross coupling, which is stored on restraint articulated columns. The construction is designed 9 cross ties and spacing of individual bonds is 6.0 m in the extreme lateral links are hinged mounted columns with stored axial length 6.0 m, which are secured lattice bracing longitudinal forces from the effects of wind. All columns are stored on concrete footings. In the longitudinal direction of the object is reinforced by transverse glue press in the plane of the roof and walls. Lateral bracing is located in the outer fields of the structure. Purlins and side runner are statically designed as simple beams, stored in the longitudinal direction of the transverse links and columns.
|
|
|
Production hall
Londa, Jan ; Pilgr, Milan (referee) ; Sýkora, Karel (advisor)
This thesis deals with steel structures of industrial building with the arrangements of the building with a span of 18 m, a length of 18 m and a corresponding height of cantilever of a crane track girder is 6,6 m. In the hall are considered two cranes with a capacity of 20/5 t and 32/8 t. The structures is designed for the district of Olomouc.
|
guest ::
