|
|
Pendulum jaw crusher 900 x 500
Hladík, František ; Malach, František (referee) ; Malášek, Jiří (advisor)
This diploma thesis is concerned with a construction design of single toggle jaw crusher DCJ 900x500. In the first part, the theoretical background and ways of material disintegration are discussed. The second chapter describes types of material crushers in general, especially jaw crushers and their parts. The third chapter is concerned with calculations and the design of the most important parts of the machine. The fourth part consists of the crusher power calculation, design of the pendulum and its production technology. The last part includes the result of FEM analysis for the particular variant of pendulum production. The thesis also includes drawing documentation of the crusher and the pendulum.
|
|
|
Design of exhibition hall roof
Němec, Petr ; Ing.Paris Chalivopulos (referee) ; Zich, Miloš (advisor)
The Diploma’s thesis is focused on the design of selected parts of reinforced concrete exhibition hall (prestressed concrete purlin, prestressed concrete girder, reinforced concrete column, reinforced concrete footing, post-tensioned concrete girders). The load calculation (the self weight, the permanent load, the wind load, the snow load and imposed load), the design and the review of selected reinforced concrete items and the drawing documentation are included in this thesis.
|
|
|
Design of prestressed box gireder bridge
Hofírek, Radovan ; Jurík, Michal (referee) ; Zich, Miloš (advisor)
This thesis deals with bridging of a lowland valley and the creek Dolanský in the section Jánovce – Jablonov on the Slovak motorway D1. Four variants of the bridge have been developed. Subsequently prestressed single box gilder with large overhangs that are supported by precast struts was selected as the most suitable variant. The construction of the bridge will take place in a formwork suspended on overhead launching scaffolding. The static assessment according to the Europan standard has been drawn up for this variant. The load of the bridge is projected according to the ČSN EN 1991-2 - Traffic loads on bridges and the dimensoin of concrete structures according to the ČSN EN 1992-2 - Concrete bridges - Design and detailing rules. The calculation of load is done using computer software SCIA Engineer 10.1 and Midas Civil.
|
|
|
Bridge across the I/11 road
Macák, Jan ; Šrubař, Jiří (referee) ; Panáček, Josef (advisor)
This diploma thesis deals with a project of a road bridge. The bridge is located on a second class road S 7.5/50 and goes over a I/11 road and a local road crossing in Bystřice. Three options of the road bridge are conceived out of which the connected beam girder is chosen for further development. A calculation of the structural stability of the load-bearing construction, that includes time analysis of the construction work (i.e. particular phases of the construction), is added to the project. The structural stability calculation is assessed in accordance with valid European standards. Drawing documentation, a time schedule and 3D visualization of the road bridge is also attached to the diploma thesis.
|
|
|
Design of the roof structure over the garage
Kukla, Radim ; Pinkas, Karel (referee) ; Klusáček, Ladislav (advisor)
The bachelor´s thesis „Design of the roof structure over the garage“ deals design and dimensioning of concrete roof structure, consisting continuous two way slab. The slab is suportted by beams in both directions. The aim of the project is to desing and evaluate the ultimate limit state of reinforced concrete slabs and beams. Also was created computational model to analysis the construction, model was created in software Scia Engineer. To verify the resulting values of internal forces was used to the method of replacement beans. Finally was made drawings of roof structure.
|
|
|
Wall crane
Kopecký, Libor ; Pokorný, Přemysl (referee) ; Malášek, Jiří (advisor)
This bachelor thesis deals with constructional design of wall crane. The aim of this thesis is to perform inspecting calculation according to actual standards and to create drawing documentation for loading capacity 600 kg and unloading 3750 mm according to assignment. Another part of thesis is to perform appropriate choice of pulley block according to important parameters.
|
|
|
Reinforced concrete structure
Zatloukal, Bohuslav ; Bažant, Zdeněk (referee) ; Šulák, Pavel (advisor)
This bachelor project is focused on the design of monolithic reinforced concrete ceiling structure of the first floor of a hotel and creation design documents of the load-bearing elements. The load-bearig elements (ceiling slab, outer rib, column and core wall) are appraised according to ultimate limit state. For calculation of internal forces was used a software named RFEM and the internal forces were verified by simplified manual method. Assessment is done according to ČSN EN 1992-1-1.
|
|
|
Reinforced concrete structure of a multifunction building
Borovec, Michael ; Švaříčková, Ivana (referee) ; Šulák, Pavel (advisor)
This bachelor thesis deals with the construction of a multifunctional building on four floors and one basement. In the basement will be located the warehouses, on the ground floor will be located offices and on the second, third and fourth floor will be located flats. The ceiling slab of the firts floor, staircase and column is designed. The ceiling slab is designed as reinforced concrete locally supported by columns, reinforced in both directions. Program SCIA Engineer 19.1 is used to calculate the internal forces. To varify the accuracy of the results is used manual calculation. The work includes drawings of the slab, staircase and column reinforcement. The bulding is designed according to ČSN EN 1992-1 1.
|
|
|
Load bearing structure of multifunctional house
Strnad, Stanislav ; Šiška, Radek (referee) ; Strnad, Jiří (advisor)
Subject of this diploma thesis is to design structural system of multifunctional building in Brno. This apartment building has 4 storey. Main load-bearing elements are concrete ceilings, columns and beams in first and second storey. In third and fourth storey are main load-bearing elements masonry and concrete ceilings with beams. Also there is prestressed beam in first storey. The structure was assessed for ultimate and serviceability limit state acording to standarts and regulation. Drawings and drawings of construction are part of the diploma thesis.
|
|
|
Principles and design of project elaboration of boiler islands aimed at piping
Suchomel, Radoslav ; Létal, Tomáš (referee) ; Nekvasil, Richard (advisor)
The Thesis solves the issue of a design and construction of piping specifically focused on boiler apparatus and its equipment. This issue is important for creation of the piping classes in the (PDMS) programmes and for acceleration of output parameters which are mainly the temperature, materials, variable parameters, etc. This leads to other problems such as service life, security, economy, etc., are.
|
guest ::
