|
|
Design of Laboratory Centrifuge for Sample Separation
Kašná, Marie ; Rubínová, Dana (referee) ; Fridrichová, Eva (advisor)
The project deals with the design of laboratory centrifuges with regard to aesthetic, ergonomic and technical parameters. Emphasis was placed on stability, ease of use and further possibilities for use. The project also includes an analysis of the current market. The resulting device design can be widely used, but is most suitable for small laboratories.
|
|
| |
|
| |
|
|
Wireless PC controll
Macháček, Jiří ; Burian, František (referee) ; Macho, Tomáš (advisor)
This work deals with design of PC remote control, which is able to control computer with operating system Windows and Linux using Wifi connection. There was also created necessary support software for both operating systems. Communication was secured by ciphering algorithm.
|
|
|
The System for Controlled Heating and Roller Blinds in the Building
Brudný, Tomáš ; Macháň, Ladislav (referee) ; Šteffan, Pavel (advisor)
The object of this project was to develop a device, which would by use to coordinate or control device wireless. The system divided to several independent devices, which assure high comfort for the user. The basic unit contains of touch panel which allow the user to control the system. The second unit is used for communication the system with GSM net. The third unit is used to coordinate the system from a PC. This unit makes possible data collection and their evaluation. This unit can as well control and coordinate any devises in the system. Part and parcel of this system are units which are used to drive the end consumers. The hole system is powered from a instead powers supply which is managed from a microprocessor. These devices make it possible, to the system to work without line voltage. The system is designed modular, so in the future it is possible to expand the system of others peripherals.
|
|
|
Design of miniature thermal chamber
Červínek, David ; Bastl, Michal (referee) ; Chalupa, Jan (advisor)
This thesis is about designing and bulding temperature chamber. Main use for this chamber is to test devices which are designed in Mechlab laboratory. While I was developing this chamber I used Simuling for simulation of thermodynamic events. For LC filter simulation I used LTspice IV. Peltiers device is used as cooling/heating element. For calculation and control is used 3.5“ touch screen programmed in 4D Workshop. Final device is capable to automatically maintain set temperature in range of -13°C to 80°C. Temperature can be set as stationary or cyclic between two predefined temperatures. User can also choose temperature that will be used by regulator.
|
|
| |
|
|
Realization of digital oscilloscope
Kulig, Tomáš ; Michal, Vratislav (referee) ; Frýza, Tomáš (advisor)
This work is focused to digital handheld oscilloscope. Input circuits are solved by analog devices. DSP (Texas Instruments company) will be used for fast processing of signals from output A/D convertors. LCD display with touch screen is used for interaction with user. The result will be fully functional device. It would measure voltage waveforms within the scope from tens mV to tens V with transmission bandwith from direct-current signal up to tens of MHz
|
|
|
Design of the user-friendly touch screen GUI and a physical connection to an existing simulation hardware device
Husar, Jan ; Kaczmarczyk, Václav (referee) ; Štohl, Radek (advisor)
Práce uvádí základní informace o průmyslové sběrnici AS-Interface a popisuje její funkce. Dále se zabývá rozšířením stávajícího FTZ AS-Interface Slave Simulátoru o dotykový display, který značně usnadní ovládání tohoto simulačního nástroje. Je zde nastíněn návrh a řešení uživatelského dotykového rozhraní k tomuto simulátoru s použitím Amulet LCD modulu STK 480272C. Vývoj tohoto rozhraní je proveden pomocí GEMstudia, softwaru firmy Amulet Technologies a grafických programů. Dále tato studie pojednává o softwarové úpravě FTZ AS-i Slave Smilulátoru. Jedná se o úpravu řídícího FPGA v jazyce VHDL zajišťující komunikaci s dotykovým displejem. Poslední kapitola se týká problematiky spojené s návrhem uživatelsky přívětivé aplikace.
|
|
|
User Interface for RoboDelivery Unit
Vostřejž, Tomáš ; Zbořil, František (referee) ; Uhlíř, Václav (advisor)
The aim of this thesis is to design and implement user interface for RoboDelivery service. In addressing the problem, attention is drawn to the fact that interaction with the delivery unit must be intuitive and cover the widest possible range of users, including users with visual, auditory or tactile disabilities. Furthermore, the designed interface is tested with the help of users. The result is an ODROID application.
|
guest ::
