|
|
Heating and cooling of the administrative building with hall
Hečko, Jakub ; Horká, Lucie (referee) ; Topič, Jan (advisor)
The bachelor thesis deals with the design of heating and cooling for an administrative building with a storage hall. The theoretical part focuses on large-area radiant heating. The computational part includes a detailed design of heating for the administrative building with a storage hall and a design for cooling the administrative building. The administrative building is heated by underfloor heating, while the storage hall is heated using hot water radiant panels. Cooling for the administrative building is designed using two-pipe cassette fan coil units. The source of heat and cold is an inverter air-to-water heat pump. Ventilation is considered forced, using air handling units. The design of hot water preparation is addressed as a priority. The project part includes drawing documentation and a technical report.
|
|
|
Heating systems of multifunctional houses with renewable sources
Požár, Tomáš ; Počinková, Marcela (referee) ; Formánek, Marian (advisor)
The main of the bacherol´s thesis is the heating solution of the polyfuncional object, with arbitary renewable resource. The thesis is divided into three parts. The first is theoretical part, the second is computational part, the third is project part. The theoretical part deals with renewable resources, their history, species, components, heating elements, underfloor heating. The compuational part involves the design of heating. The object is divided into three parts, commercial, communication and apartment part. The first and second part are heating by raditors, the third part is heating by underfloor heating. The project part contains prepared based on the computational part and technical report.
|
|
|
Design of heating sources for a family house
Svoboda, Roman ; Lisý, Martin (referee) ; Toman, Filip (advisor)
This bachelor thesis is focused on the choice of heating source for an older family house. It contains a summary of currently used heating sources with their advantages and disadvantages and possibility of combination whit other structural elements. The third section is the calculation of thr heat loss of pre-selected object. Finally the thesis deals with the economic appreciation of specific sources and their cost-effectiveness.
|
|
|
Influence of Insulating a Building for Family Holiday on the Expenses Related to its Operation
Hanyk, Tomáš ; Hrdlička, Tomáš (referee) ; Čech, Josef (advisor)
This diploma thesis deals with the impact of thermal insulation on expenses relateted to the operation of the weekend house. Theoretical part describes options of thermal insulation systems, insulation methodes, describes structural prices and costs. Practical part of this thesis describes heat costs on specific weekend house situated in Karlovy Vary region. Thermal insulations are designed in three different variants. Calculation of costs of every designed insulation systém is included in this thesis. In next part of thesis is calculated return of investment for every designed solution. In conclusion of the diploma thesis are compared impacts of thermal insulation on expenses ralated to the operation of the weekend house.
|
|
|
Air-conditioning of office rooms
Taclík, Jakub ; Toma, Róbert (referee) ; Fišer, Jan (advisor)
The aim of this diploma thesis is to design the air conditioning system for one floor of the offices. The thesis is divided into theoretical, computational and design part. The computational part consists in determining the amount of ventilation air, calculation of heat losses, heat gains and psychrometric calculations for summer and winter season. Based on the calculated values, air ducts, end-points and air-conditioning units are designed. The diploma thesis is supplemented with a list of materials and drawing documentation.
|
|
|
Assessment of investment in heating house
Zdražil, Pavel ; Štelcl, Otakar (referee) ; Baláš, Marek (advisor)
The bachelor´s thesis deals with economic evaluation of investment in insulation and heating and resulting operation of boilers in a family house. The calculation of thermal design power, which is needed for heating, was made according to norm ČSN EN 12831 for the house in actual state without insulation. Further were suggested two options of insulations and modernization of windows, for reduction of heat loss. Then was calculated the thermal design power for the two new options, again according to norm ČSN EN 12831. Next were presented possibilities of heat sources. For the specified family house was chosen a gas boiler in classical and condensing implementation for all three variants of insulation. These all options have made six variants which were compared together and evaluated. In the conclusion were excluded four variants economically disadvantageous and was chosen one of the final two variants as the best suggestion for the specified family house.
|
|
|
Heating multifunctional building
Čajčíková, Jolana ; Horák, Petr (referee) ; Počinková, Marcela (advisor)
The theme of this bachelor´s thesis are problems of condensing gas boiler rooms in the theoretical part and heating multifunctional building in the calculation part. The four-floor multifunctional building is situated in Brno in a slightly built-up area and includes commercial units, classrooms and administrative units for rent, an IT company and a restaurant for 120 people situated in the fourth floor. The heat source for this building is a gas condensing boiler room. The heating surface consists of steel panel radiators. There is forced ventilation installed in the building.
|
|
|
Design of heating system of apartment building
Lacko, Martin ; Vyhlídalová, Karolína (referee) ; Horká, Lucie (advisor)
This bachelor thesis is focused and designed on the heating of an apartment building. The theoretical part describes heat pumps, their properties and types. The calculation part is focused on the specific design of the heating system. The designed heat source is an air/water heat pump. The heating of the building is solved using board and pipe bodies. Specifically and in detail, the technical solution and implementation requirements are described in the technical report.
|
|
|
Proposals for action elimination of heat loss in buildings
Vašulka, Tomáš ; Musilová, Petra (referee) ; Baláš, Marek (advisor)
This bachelor thesis is about measures leading to heat loss reduction for the model family house. In the research part, available methods and materials are summarized which can be used in thermal insulation of perimeter structures. In the next part, principle of recuperation unit is described which serves for decrease of heat loss by ventilation. Next, the calculation of heat loss is described with heating costs of the house. In the next part, several thermal insulation measures are proposed. In the end, the insulation measures are compared economically.
|
|
|
Heating system of a Low-energy house
Jankola, Mario ; Pech, Ondřej (referee) ; Katolický, Jaroslav (advisor)
This master’s thesis pertains to heating practices of low-energy houses using a heat pump (example 1) and low-temperature condensing boiler (example 2). The first part of the work contains calculations of suggested building’s heat efficiency and of under-floor heating. The second part of the work includes estimates of seasonal heating factors for construction with a heat pump. Based on the comparison: both of these heating systems are recommended; the capacity of the warm water container is established; and safety elements are chosen. Furthermore, a system of regulation for warm water heating is determined, and a curve of equithermal regulation for heating is calculated. Both of the recommended heating possibilities include calculations of costs of supplies and manufacturing, as well as blueprints for construction.
|
guest ::
