|
|
Apartment Building in Žďár nad Sázavou
Fiala, Jakub ; Nespěšný, Ondřej (referee) ; Pěnčík, Jan (advisor)
Goal of this bachelor thesis is creation of a project documentation of an apartment building in Žďár nad Sázavou. Chosen location is in a newly constructed side of the city called Starý dvůr nearby the city center. The area is appointed for housing. This apartment building is designed with one underground floor and four regular floors. The foundation is made of concrete strips. The traverse wall system is composed of brick blocks and the ceiling is made from reinforced concrete. The ventilated facade is insulated with the ETICS system. The roof is designed as a single-layer extensive green flat roof. In the cellar a technical room and storage cubicles are located. A barrier free entrance to the first ground is from the parking lot in the northern side of the building. There are overall ten apartments. Most of the apartments comprise balcony or terrace. Around the building is designed roomy garden with a gazebo and kids playground.
|
|
|
Recording Studio with Accomodation
Fiala, Jakub ; Pilný, Ondřej (referee) ; Kalousek, Lubor (advisor)
The main aim of this master’s thesis is to design a recording studio in a place of an abandoned agricultural building in a small village called Radešín. The thesis is structured into three parts. Goal of the first part is creation of a design documentation of architectural and structural designs. The building will consist of two storeys, a cellar and a gable roof. The most used building material will be reinforced concrete. Recording studio will offer three recording rooms accompanied by a large control room. Accommodation will include five apartments for ten inhabitants and a common room with kitchen. The second part is focused on design of selected building services. The building will be equipped with an air-to-water heat pump and wood chip boiler for heating. A mechanical ventilation with heat recovery will provide fresh air. Heat pump will also work as a cooling source. Furthermore, designs of the rainwater treatment, water heating, lightning and photovoltaics on the roof are included. The third part revolves around the matter of room acoustics. It describes basic knowledge and terminology of this field, which are then used to solve reverberation. I dealt with three variants – initial state, state with additional dampening and state with additional dampening with movable acoustic panels. One calculation was made in Microsoft Excel, the other one with help of room simulation in Odeon. Finally, I compared these two methods.
|
|
|
Parish church, Brno - Líšeň
Jurák, Vítězslav ; Klvaňa, Jiří (referee) ; Eliáš, Luboš (advisor)
This diploma thesis, called „Parish church, Brno-Líšeň“, is compiled as documentation for building construction. There is one complex building situated in slope. Therefore it consists of one partly underground floor and first floor. It is divided into three sections. Central part is designed as round-shaped body of the church with tower in the southern part of the church. Shed roof has an angle of 7° for body and an angle of 13° for tower. From the western side there is an administrative area connected to the church and from eastern side there is a community area which is supposed to be used as residential premises. Roof of both these parts is constructed as flat vegetative roof. Structural design is systemic, Velox. Foundation construction combines concrete and ferro-concrete belts and footing.
|
|
|
Multi-functional Building
Kameníček, Martin ; Sláma, Ludvík (referee) ; Mohelníková, Jitka (advisor)
This diploma thesis ‘multi-functional‘ building is elaborated in form of a project documentation fulfilling all requirements in accordance with valid directives. The project refers to a detached multi-functional new-build placed on a moderate slope in Kralupy nad Vltavou. The building includes a basement and four floors overground. This multi-functional house will be used as an apartement building with a café, containing eleven housing units – apartments. One of units on the first floor is designed as handicapped-accessible. Café with facilities and a separate entrance for public will be located in basement. Overground, outer and interior bearing walls are meant to be made of Porotherm system. The underground wil be made of concrete blocks ‘Best’. Ceiling construction will be fabricated from prestressed ceiling concrete panels ‘Spiroll‘. Roofing is maded of two parts, both are pent roofs with angle of 7°. The roof is designed as a double wall, where for the outer shell is used a wooden construction coated with concrete roofing panels ‘Bramac’. The inner shell is composed of a suspended ceiling with insulation. Part of the project is a construction of paved areas aside the building and fencing.
|
|
|
School
Filla, Josef ; Sláma, Ludvík (referee) ; Mohelníková, Jitka (advisor)
The thesis aims to project documentation stage for the execution of the project. It is an object of school for first and second grade. Documentation is prepared on the basis provided architectural studies. The building is situated on the flat, gently sloping land. The work consists of drawing and text documentation, evaluation of thermal, structural and acoustic and lighting requirements for construction, fire safety design of the building. The work includes specialized project on HVAC - heating namely, draft power and boiler room layout and design of concrete structures specialized namely design and dimensioning of cross continuous reinforced slab.
|
|
|
Multifunctional house in Uherské Hradiště
Kopecká, Lucie ; Šuhajdová, Eva (referee) ; Šuhajda, Karel (advisor)
The object of this master’s thesis is a newly-built mixed-use building in the town of Uherské Hradiště. It includes parking and office spaces, retail shops, and a coffee shop. The building is situated in a mildly sloping terrain near the town centre. It is a three-storey detached building with partial basement. The floor plan was created by joining several different-sized rectangles together. The mixed-use building is based on foundation pads and slabs. It is roofed with a warm flat roof and, above the first floor, with a green roof. The building consists of a cast-in-place reinforced concrete frame with columns and beams. The floor structure is composed of prestressed hollow core slabs. The external wall of the above-ground floors is made of hollow clay blocks and the basement external wall is made of permanent formwork. The wall of the lift shaft is built from reinforced concrete and the staircase is composed of precast reinforced concrete slabs. The external walls are insulated with contact thermal insulation system and in some parts there is timber cladding – ventilated façade with thermal insulation from glass wool. The thermal insulation of the basement and of the plinth is made of extruded polystyrene. The object is divided into several functional zones. On the ground floor there is a coffee shop, a copy shop, a stationery shop, and a bakery. On the first and second floors there are office spaces. In the basement there are technical facilities only. The main entrance of the object is from the northwest part of the plot. There the entrance to the car park is also located, situated to the northwest and southwest side of the plot. Bicycle stands and a place for recycling is also located there. Around the object there is a pavement from which there is wheelchair access to all of the functional zones.
|
|
|
Sport-hotel Frýdlant
Bartoš, Jan ; Svoboda,, Petr (referee) ; Müller, Jan (advisor)
In my thesis I will deal with the draft project documentation for sport hotel. This object is located in the quiet southeastern part of Frydlant with city views and easy access to the nearby sports facilities. It is an object of part two storey and a basement. The building is set into the sloping terrain, so the underground floor extends on to the ground. The building is based on foundation walls and footings that are made of reinforced concrete. Load-bearing walls of the underground floors are designed as reinforced concrete. Ceiling structure of the building is made as reinforced concrete beam ceiling and in other structure parts as a crosswise reinforced concrete plate. Perimeter bearing walls and two floors, are designed from the acoustic sand-lime bricks Silk. External walls are warmed by a contact insulation system. Flat single shell roof was chosen over part of the restaurant. Double-layer roof with a supporting truss structures above the main part of the building. The building is divided into functional parts. Accommodation capacities are mostly on the second floor. On the ground floor there is a restaurant with a kitchen and space for staff. In the basement there is a functional part of the wellness and gym with common dressing rooms. The only entrance path allows convenient control of customers. The building is wheelchair accessible.
|
|
|
Vine House Klentnice - technological phase roofing
Lupač, David ; Rotrekl, Ivo (referee) ; Vlčková, Jitka Laura (advisor)
The main subject of this thesis is the roofing structure of a building used to run a small to medium-sized family winery with own wine production intended for subsequent sale and a guesthouse type of accommodation. This thesis includes a complete technical report, technological regulations, statements, assessment documentation, time schedule, itemized budget, assembly machinery draft, inspection and testing plan, health and safety at the building site, principles and organizational aspects of construction, details and other technical documentation for all stages.
|
|
|
Hotel
Řehoř, David ; Bartolšic, Vít (referee) ; Matějka, Libor (advisor)
The objective of this thesis is to draw up the design documentation for the construction of a hotel. The hotel is situated on the edge of the golf resort Kaskáda near to Jinačovice. It’s a brick building with two above – ground floors and one underground. There is the staircase in the building that creates protected escape route. The perimeter wall is designed of ceramic bricks Porotherm T Profi. They are filled – in by mineral wool. The hotel is divided into three dilatational parts. There are 35 guest rooms in the hotel; two of them are barrier – free, in total 63 beds. In the ground floor there are entrance, reception, restaurant, bar, kitchen with the background. In the basement there are technical equipment, a fitness room, a wellness, changing rooms, washrooms and a bar. The roof of the hotel is flat. There is the terrace accessible from the apartments in the second floor above the restaurant.
|
|
|
Motel
Beranová, Iveta ; Utíkal, Aleš (referee) ; Utíkalová, Ivana (advisor)
The diploma thesis deals with the processing of project documentation. Specifically, the parts A, B, C, D.1.1 and D.1.3 of Annex 6 to Regulation No. 499/2006 Coll., On construction documentation, as amended by Decree No. 62/2013 Coll. The documentation refers to a motel with restaurant designed for 50 guests. The plot is located in Troubsko. The motel is divided into three separate buildings. In the main building is reception, restaurant with kitchen and offices. The building has ground floor and underground floor. The accommodation is divided into two one-storey buildings. The buildings are formed by separate units with 4 or 2 rooms which are connected by one roof. All buildings are designed with flat green roof. There is parking lot for public and restaurant guests, for accommodated guests ans private parking for employees and supply is solved on the plot. The buildings are based on plain concrete foundation strips. Vertical load-bearing structures are designed from sand-lime. Horizontal load-bearing structures are designed from precast filigree slabs. Partitions are designed from autoclaved aerated concrete blocks. The facade is thermally insulated by EPS boards. The 3% slope of the roof is achieved by using tapered EPS boards. Vegetation (stone crops) will be planted on the roof. part of this thesis is static calculation and design of staircase slab from reinforced concrete.
|
guest ::
