|
|
Photocatalytic inactivation of yeast in flow reactor
Lipenská, Michaela ; Drbohlavová, Jana (referee) ; Veselá, Mária (advisor)
This diploma thesis focuses on the photocatalytic effect of titanium dioxide and ultraviolet light. Theoretical part shows the effect of titanium dioxide and aplication in various branches. Antibacterial effect of titanium dioxide iluminated by ultraviolet light was observed in the flow tube reactor on the yeast Hansenula anomala. After adjusting the optimal flow rate experimented with different inicial concentration of yeast cells. To increase desired effect also silver was used in the photocatalytic system. As observed in many previous studies, silver decreases the time needed for killing the microorganisms. The optained date were analysed.
|
|
|
Nanoparticles preparation by green synthesis
Kortusová, Dominika ; Valušová,, Eva (referee) ; Šimšíková, Michaela (advisor)
This thesis deals with green synthesis of noble metals nanoparticles. The first part contains secondary literature research which maps both the traditional and newly developed techniques of nanoparticles preparation. Most attention is given to the various types of green synthesis, which constitute an environmentally friendly alternative to industrially applied methods. The second part deals with the preparation of noble metal nanoparticles using tea broths. The section describes the entire synthesis process and includes photographic documentation. A total of eight colloidal solutions were prepared, four of each metal. The nanoparticles were subsequently analyzed using UV-vis spectroscopy. A time-lapse spectroscopic description of each synthesis was also undertaken. Furthermore, the size distribution of the particles by volume was measured and compared with the pictures obtained by scanning electron microscopy. The results have showed that tea broths, especially those from black tea and rooibos, are suitable for the biosynthesis of stable noble metal nanoparticles.
|
|
|
Silver based raw materials for cosmetic purposes
Čaková, Adriana ; Ďubašáková, Mária (referee) ; Zemanová, Jana (advisor)
The purpose of this bachelor’s thesis was a research about silver based cosmetic products and determination of antimicrobial activity on certain species of microorganisms by chosen silver based cosmetic products. Theoretical part is focused on the problematics of silver based cosmetic products, on their main purpose, physically chemical characteristics and toxicological profile. In the theoretical part is also mentioned problematics of legislative, mainly the safety and real effectivity of tested cosmetic products. Experimental part was focused on determination of antimicrobial activity of chosen silver based cosmetic products. Two silver based cosmetic product were used to determined antimicrobial activity on selected microorganisms Bacillus subtilis, Bacillus cereus, Micrococcus luteus, Kocuria rosea, Serratia marcescens a Candida vini. From result it is apparent, that both of used Cosmetic product showed antimicrobial activity, but not on every used microorganism.
|
|
|
SnBi Solder Paste and Influence of Reactive Nanoparticles
Rychlý, Ivo ; Špinka, Jiří (referee) ; Starý, Jiří (advisor)
This work deals with effects of nanoparticles, mainly copper and silver, on properities of lead-free solder pastes. It describes basic tests done on solder pastes according to IPC-TM-650 standards. In practical section this work focuses on the preparation of Sn-Bi solder paste and the measuring of viscosity. After that different concentrations of silver copper alloy nanoparticles are added to the SnBi solder paste. These solder pastes are tested by the IPC standarts and mechanical and resistive tests are done on printed circuit boards where the effects of mixed in nanoparticles are observed.
|
|
|
The Influence of Nanoparticles on The Properties of Hard Polyurethane Foams
Eliáš, Filip ; Kotlík, Josef (referee) ; Petrůj, Jaroslav (advisor)
The theoretical part of the thesis focuses on general principles of polyurethane chemistry. Nanotechnologies are also discussed, in particular using nanoparticles in the production of polyurethane foams. There are also mentioned selected preparation methods of silver and titanium dioxide nanoparticles. The experimental part describes mainly a novel method for synthesis of the concentrated solution of titanium dioxide nanoparticles in glycerol and their analysis by using confocal microscopy, scanning electron microscopy, dynamic light scattering and UV-VIS spectroscopy. Finally, there are suggested particular steps for further investigation of prepared nanoparticles for the production of rigid polyurethane foams, and also for other applications.
|
|
|
The effect of silver on yeasts photokilling process efficiency
Vrchovecká, Petra ; Pekárková, Jana (referee) ; Veselá, Mária (advisor)
In this diploma thesis, photocatalytic effect of titanium dioxide with addition of silver was described and demonstrated on inactivation of the yeast Candida vini. Titanium dioxide was prepared by sol-gel process and deposited by printing metod on soda-lime glasses. On the deposit of titanium dioxide was added silver in various concentrations which increased effect of TiO2. Inactivation of yeasts was examined by effectiveness of UV light with intensity 170 and 100 W/m2.
|
|
|
Preparation of Ag/Co/Ag Trilayers
Burda, Pavel ; Kolíbal, Miroslav (referee) ; Čechal, Jan (advisor)
The Bachelor's thesis is aimed to the preparation of silver and cobalt ultrathin films. The films are formed on modified surfaces of crystalline silicon substrates (SiO2/Si(111), Si(111) ?H, Si(111) 7×7) and amorphous SiO2 in a form of a quartz glass. Thin films are grown using an effusion cell for Molecular Beam Epitaxy (MBE). Surface modified surfaces are covered subsequently by a silver, cobalt and silver thin layer. The individual film thickness is 6 nm. Consequently the samples are studied by the X-ray Photoelectron Spectroscopy (XPS) and the Atomic Force Microscopy (AFM). The morphology of thin films and growth modes are compared among the substrates. Growth modes change with the surface modification type. Complete trilayer system Ag/Co/Ag was prepared on SiO2/Si(111) and Si(111) 7×7. Such system can be employed in plasmonics in order to allow the control of surface plasmon polariton properties by an external magnetic field.
|
|
|
Generation of nanoparticles by electrical discharge in liquids
Čechová, Ludmila ; Horák, Jakub (referee) ; Kozáková, Zdenka (advisor)
This thesis focuses on the process of nanoparticle generation by electric discharge in liquids. The theoretical part is focused on generation of electric discharge in liquids, various methods of preparation of nanoparticles, including plasmachemical methods and methods of nanoparticle characterization. The experimental part deals with the preparation of silver nanoparticles. As a precursor for generation of nanoparticles by electric discharge, an aqueous solution of silver nitrate was used. The influence of experimental conditions, such as the influence of voltage polarity, influence of delivered power, effect of concentration, effect of added electrolyte and time course of nanoparticle formation were studied. All samples were analyzed by UV-VIS spectrometry. To confirm the presence of nanoparticles in the solution, one of the samples was analyzed by a scanning electron microscope with an energy dispersion spectrometer for elemental analysis. Plasma diagnostics was performed using optical emission spectroscopy.
|
|
|
Generation of metallic nanoparticles by non-thermal plasma in liquids
Čechová, Ludmila ; Blahová, Lucie (referee) ; Kozáková, Zdenka (advisor)
This thesis focuses on the process of nanoparticle generation using new source of nonthermal plasma combining corona and pin-hole discharge in liquids. The theoretical part is focused on generation of metallic nanoparticles using various types of plasma discharge, the properties of metallic nanoparticles, their preparation by other methods and methods of characterization of nanoparticles. The experimental part deals with the preparation of copper, silver and gold nanoparticles from solutions of their precursors. The influence of experimental conditions, such as the influence of voltage polarity, effect of precursor concentration, effect of added electrolyte or reducing agent were investigated. All samples were analyzed by UV-VIS spectroscopy. Dynamic light scattering was used to determine the sice of nanoparticles. To confirm the presence of nanoparticles, samples were analyzed using scanning microscope with and energy dispersion spectrometer for elemental analysis.
|
|
| |
guest ::
