|
| |
|
|
Instalation of AR64304 Engine
Kubiš, Vojtěch ; Beran, Martin (referee) ; Svída, David (advisor)
This diploma thesis is concerned about installation of AR64304 engine into Alfa Romeo 75. The main goal of this thesis is a design of exhaust system for AR64304 engine installed in the engine bay of the vehicle. The design of the exhaust system was done with a respect to the noise and emission requirements, as well as with a respect to the performance of the engine. Lotus Engine Simulation software was used for the simulation of the engine with proposed exhaust system. Input data for the simulation were obtained from measurements of the cylinder head on a flow bench and precise measurement of camshaft profile. The essential contribution of this work is a set of construction parameters of the exhaust system. This thesis also contains technical specifications of AR64304 engine and the installation process.
|
|
|
Cylinder Head for Single Cylinder Engine
Lesák, Tomáš ; Beran, Martin (referee) ; Svída, David (advisor)
This thesis is dealing with structure design solutions of combustion chambers and intake ports in petrol combustion engines, including their basic properties. Part of the thesis is focused on experimental measurements of a real intake port of Mikron III engine. Also it describes creation of 3D model for CFD flow simulation, optimization proposals for improved engine induction and results evaluation.
|
|
|
Intanke and exhaust manifold for racing engine
Chuchma, Ondřej ; Zháňal, Lubor (referee) ; Beran, Martin (advisor)
This Master’s thesis is focused on design and optimalization of intake and exhaust system of the C20XE engine. It is four-cylinder gasoline engine with stroke volume of two litres, which was produced by car company Opel. This engine is determined for Opel Astra F automobile, that is build for racing. For optimalization of dimension parameters there is used a Lotus Engine simulation software, which simulates one-dimension gas flowing in manifold. 3D CAD models are made in Pro ENGINNER software.
|
|
|
Design of Electric Suction Pump
Šrůtková, Markéta ; Sládek, Josef (referee) ; Rubínová, Dana (advisor)
The assignment of this bachelor’s final thesis is the design of electric suction pump. The main goal is to design a device with adjustable vacuum for people of all age groups, a stable attachment of the secretion container, a suitable place storage space for tubing and innovative elements. The work is based on the current state of knowledge of existing products and their arrangement. The design takes into account technical and ergonomic requirements. The final product will be used mainly by rescuers of integrated rescue systems.
|
|
|
Tractor Engines Intake Systems Overview
Pacovský, Tomáš ; Svída, David (referee) ; Dundálek, Radim (advisor)
The main focus of this work is creation of textual and pictorial documentation of equipments used on nowadays tractor engine intake systems. Firstly author is focused on introduction of individual parts of intake system with their detail function description and pictorial documentation. After that the separate intake systems overview is made via world known tractors such as Case IH, Deutz – Fahr, John Deere, Massey Ferguson and New Holland. Every representative of tractor is introduced with its overview and pictures of the most significant parts concerned with inletting of air into the engine. The entire pictures documentation of intake systems overview is made by camera at the place of tractor’s dealer and when this photo documentation was unsatisfactory, the www pages of dealers was used. This bachelor’s thesis should show the progressive development of intake system’s individual equipments. Eventually this thesis can be used to evolve another research projects.
|
|
|
Modification of a motorcycle spark ignition engine
Poulíček, Matěj ; Ramík, Pavel (referee) ; Kaplan, Zdeněk (advisor)
This diploma thesis is about possible modifications of four-stroke motorcycle petrol engines for increasing power. It also deals with the modification of the Aprilia Leonardo 250 engine from a 2-valve variant to a 4-valve variant, the simulation of this engine and the proposed solution in the GT SUITE. Attention is also paid to the strength control of the crank mechanism of the engine.
|
|
|
Increase of Charging Efficiency of 140kW CNG Engine
Hadrava, Martin ; Vančura, Jan (referee) ; Svída, David (advisor)
The master’s thesis is focused on flow analysis work filling in turbocharged CNG engine. The research method is reverse engineering. The intake canal is casted and than scanned by 3D Scanner ATOS. The CAD model is created in program Creo Parametric 2.0. In the created interactive model is simulated flow in the CFD program Star CCM +. The air intake system is modified for increasing the charging efficiency of the engine.
|
|
|
Modifying the Babetta engine
Poulíček, Matěj ; Píštěk, Václav (referee) ; Kaplan, Zdeněk (advisor)
This bachelor thesis is about one of the possible modifications of two-stroke single-cylinder Babetta 210 engine for increasing of power. Further about another manufactured Babetta engines with focus on their pros and cons. Attention is paid also to possible design changes for elimination of drawbacks.
|
|
|
Modification of a motorcycle spark ignition engine
Poulíček, Matěj ; Ramík, Pavel (referee) ; Kaplan, Zdeněk (advisor)
This diploma thesis is about possible modifications of four-stroke motorcycle petrol engines for increasing power. It also deals with the modification of the Aprilia Leonardo 250 engine from a 2-valve variant to a 4-valve variant, the simulation of this engine and the proposed solution in the GT SUITE. Attention is also paid to the strength control of the crank mechanism of the engine.
|
guest ::
